source: trunk/server/doc/package-build-howto @ 2510

Last change on this file since 2510 was 2484, checked in by adehnert, 11 years ago
Update package-build-howto * Paths have changed * Explicitly mention the SRPM status
File size: 7.7 KB
RevLine 
[934]1This document is a how-to for building new packaages for scripts.mit.edu.
2
[1353]3Prerequisites
4=============
[934]5
[1353]6  * A trusted scripts.mit.edu server
7  * A scripts-build account on that server (but that was created when it
8    was installed, or something's wrong)
9  * A set of personal credentials for the scripts svn repo
[934]10
[1353]11Directions
12==========
[934]13
[1353]14  * Log into the server as root
[934]15
[1353]16  * /bin/su scripts-build # It's a bad idea to build as root.  This is
17                          # less urgent than it used to be, because you'll
18                          # be building using mock in a chroot, but it's
19                          # still good habit.  Also, if you work in
20                          # /srv/repository as root, scripts-build won't
21                          # be able to change some of the resulting files
22
23  * cd /srv/repository
24
25  * svn up  # Important both to build with current code, and because the
26            # svn revision becomes part of the package release number,
27            # and you can infer whether changes in the code were made
28            # before or after a particular build by looking at the package
29            # and svn release/revision.
30
31  * cd server/fedora
32
33  * # Look in the .dload directory.  If you want to build with a newer
34    # version of any upstream packages that are there, then
35    * rm .dload/[OLD-PACKAGES].src.rpm # It's fine to delete all SRPMs here
36    * rm download_stamp
37
38  * make [PACKAGE-YOU-WANT] # e.g. 'make httpd' builds Apache with our patches
39    # Note that openafs-devel is a build-dependency of accountadm, so if
40    # this is a new Fedora release being bootstrapped, you'll have to
41    # build openafs and install its -devel package before building accountadm
42
43  * # If the build succeeds, the mock logs, build log, binary and SRPMs
44    # will be in /var/lib/mock/fedora-[RELEASE]-{x86_64|i386}/result (note that
45    # this will be cleared out each time you start a new build, so if
46    # you're building several packages in succession, copy the results
47    # somewhere safe after each build to preserve them)
48    # Add the packages to the repository by using a trusted machine and
[2484]49    krootscp root@[BUILD-SERVER]:/var/lib/mock/fedora-[RELEASE]-{x86_64|i386}/result /mit/scripts/yum-repos/rpm-fc[RELEASE]
[1353]50
[2484]51    # There has been some historic discussion about whether SRPMs should be
52    # added to the repository. At this point, the standard is to include them.
53
[1353]54  * # Rebuild the repo metadata to include the new packages.
[2066]55    cd /mit/scripts/yum-repos/rpm-fc[RELEASE]
[1353]56    # If you have a trusted machine:
[2066]57    createrepo -d .
[1353]58    # Otherwise, on a scripts server, as root:
59    mkdir /root/repodata-YYYYMMDD # Or any suitable temp directory
[2066]60    createrepo -d -o /root/repodata-YYYYMMDD .
[1353]61    # Then from your trusted machine
[2484]62    krootscp -r root@[BUILD-SERVER]:/root/repodata-YYYYMMDD /mit/scripts/yum-repos/rpm-fc[RELEASE]
[1353]63    # Sanity check the files, and then replace the current repodata directory
64    # with the one in repodata-YYYYMMDD.
65
66Patching packages
67=================
68
69  * To make changes to the packages that we are the upstream maintainers
70    of (that is, the packages that the Scripts Team wrote):
71    * The authoritative source lives in server/common/oursrc/[PACKAGE]
72    * The RPM spec file is server/fedora/specs/[PACAKGE].spec
73    * You directly make the relevant changes to those files, commit to
74      svn, and then rebuild the package as above to include the new changes.
75
76  * To make changes to the upstream packages that we "scriptsify":
77
[1558]78    * If we haven't previously scriptsified this package, you'll need
79      to add it to the upstream_yum line in SVN/server/fedora/Makefile,
80      and remove the download_stamp file so that it gets fetched next
81      time you run 'make [PACKAGE]'.
82
[1353]83    * The authoritative upstream source comes from the SRPM in the upstream
84      yum repo, or in odd cases like openafs, from some other URL.  When
85      you 'make [PACKAGE]' in SVN/server/fedora, if download_stamp has
86      been removed, the SRPMs are all refetched into
87      SVN/server/fedora/.dload, and then installed with 'rpm -i'.  This
88      results in the source patches, and tarballs landing in ~/rpmbuild/SOURCES
89      and the spec files landing in ~/rpmbuild/SPECS.  You can also
90      manually get individual SRPMs for a package by doing this (these
91      steps work fine as a mortal user, including the 'rpm -i'):
92      * yumdownloader --source [PACKAGE]
93        # That deposits [PACKAGE]-[VER]-[RELEASE].src.rpm in the current dir
94      * rpm -i [PACAKGE]-[VER]-[RELEASE].src.rpm
95        # That unpacks the SRPM, placing the source tarball and patches in
96        # ~/rpmbuild/SOURCES and the spec file in ~/rpmbuild/SPECS; it
97        # does *not* globally install anything, and doesn't require root
98      If you prefer to not install the file, you can simply extract it
99      into a directory by running:
100      * /mit/ghudson/scripts/rpmx [PACKAGE]-[VER]-[RELEASE].src.rpm
101
102    * If you develop a patch to the upstream source, you should save a
103      diff with your changes and add it to the repo as
104      SVN/server/common/patches/[PACKAGE]-[SHORT_DESCRIPTIVE_STRING].patch
105
106    * To cause your patch to be applied when the package is built, you
107      will need to save a copy of the original spec file for the upstream
108      package, then modify it to add a line like:
109        Patch[NUM]: [PACKAGE]-[SHORT_DESCRIPTOVE_STRING].patch
110        # This should generally go after the last existing Patch line
111        # in the file, and [NUM] should be significantly larger than
112        # the upstream Fedora patches, to avoid conflicts later.  This
113        # line tells rpmbuild where the contents of the patch live.
114      You also add a line like:
115        %patch[NUM] -p1 -b .[SHORT_DESCRIPTIVE_STRING]
116        # This should generally go after the last existing %patch line
117        # in the file, [NUM] should be the same as in the Patch line, and
118        # tells rpmbuild that this is the point at which to actually apply
119        # the patch
120
121    * The Release tag in the spec file should have ".scripts.%{scriptsversion}
122      inserted into it just before %{?dist}, or at the end of the release
123      if %{?dist} is unused.
124      # e.g.          Release: 1%{?dist}
125      # changes to    Release: 1.scripts.%{scriptsversion}%{?dist}
126      This causes the package version to include the string "scripts"
127      and our SVN revision number (which is set by the Makefile) for
128      easy identification (this version will also be greater than the
129      upstream version, so the system will prefer to update to it).
130
131    * If the scriptsified version of the package needs to be installed
132      on the servers, and a new upstream version would break scripts
133      without our changes, add a line like this:
134        Provides: scripts-[PACKAGE]
135      and correspondingly, add "scripts-[PACKAGE]" to the Requires line
136      in SVN/server/fedora/specs/scripts-base.spec (and remember to
137      build, upload, and deploy a new scripts-base package)
138
139    * Though we're not always good about it, do feel encouraged to add
140      an entry at the top of the %changelog section near the bottom of
141      the spec file explaining your modifications
142
143    * When you're finished with the updates to the upstream spec file,
144      create a diff from the upstream spec file to your new version,
145      and add it to the SVN repo as
146        SVN/server/fedora/specs/[PACKAGE].spec.patch
[1558]147      Make sure to copy it there before you try to build the package,
148      since if you don't mock will use the original specfile (and
149      overwrite any changes you made in place).
[1353]150
[1712]151Replacing the source of packages
152===============================
153
154    * Patch the specfile to have an alternate Source0 (or SourceX) URL
155      pointing to the updated source of the package.  You will then
156      need to add a spectool line to the Makefile to ensure this new
157      source gets downloaded on build:
158        spectool -g -R $(specs)/PACKAGE-NAME.spec
159
[1693]160Tips
161====
162
163    * Don't try to build a 32-bit package without building the 64-bit
164      package as well.
Note: See TracBrowser for help on using the repository browser.