[210] | 1 | ############################################################################# |
---|
| 2 | # Sample NRPE Config File |
---|
| 3 | # Written by: Ethan Galstad (nagios@nagios.org) |
---|
| 4 | # |
---|
[1002] | 5 | # Last Modified: 11-23-2007 |
---|
[210] | 6 | # |
---|
| 7 | # NOTES: |
---|
| 8 | # This is a sample configuration file for the NRPE daemon. It needs to be |
---|
| 9 | # located on the remote host that is running the NRPE daemon, not the host |
---|
| 10 | # from which the check_nrpe client is being executed. |
---|
| 11 | ############################################################################# |
---|
| 12 | |
---|
| 13 | |
---|
[1002] | 14 | # LOG FACILITY |
---|
| 15 | # The syslog facility that should be used for logging purposes. |
---|
[210] | 16 | |
---|
[1002] | 17 | log_facility=daemon |
---|
| 18 | |
---|
| 19 | |
---|
| 20 | |
---|
| 21 | # PID FILE |
---|
| 22 | # The name of the file in which the NRPE daemon should write it's process ID |
---|
| 23 | # number. The file is only written if the NRPE daemon is started by the root |
---|
| 24 | # user and is running in standalone mode. |
---|
| 25 | |
---|
[2048] | 26 | pid_file=/var/run/nagios/nrpe.pid |
---|
[1002] | 27 | |
---|
| 28 | |
---|
| 29 | |
---|
[210] | 30 | # PORT NUMBER |
---|
| 31 | # Port number we should wait for connections on. |
---|
| 32 | # NOTE: This must be a non-priviledged port (i.e. > 1024). |
---|
| 33 | # NOTE: This option is ignored if NRPE is running under either inetd or xinetd |
---|
| 34 | |
---|
| 35 | server_port=5666 |
---|
| 36 | |
---|
| 37 | |
---|
| 38 | |
---|
| 39 | # SERVER ADDRESS |
---|
| 40 | # Address that nrpe should bind to in case there are more than one interface |
---|
| 41 | # and you do not want nrpe to bind on all interfaces. |
---|
| 42 | # NOTE: This option is ignored if NRPE is running under either inetd or xinetd |
---|
| 43 | |
---|
| 44 | #server_address=192.168.1.1 |
---|
| 45 | |
---|
| 46 | |
---|
| 47 | |
---|
| 48 | # ALLOWED HOST ADDRESSES |
---|
| 49 | # This is a comma-delimited list of IP address of hosts that are allowed |
---|
| 50 | # to talk to the NRPE daemon. |
---|
| 51 | # |
---|
| 52 | # NOTE: The daemon only does rudimentary checking of the client's IP |
---|
| 53 | # address. I would highly recommend adding entries in your |
---|
| 54 | # /etc/hosts.allow file to allow only the specified host to connect |
---|
| 55 | # to the port you are running this daemon on. |
---|
| 56 | # |
---|
| 57 | # NOTE: This option is ignored if NRPE is running under either inetd or xinetd |
---|
| 58 | |
---|
[713] | 59 | allowed_hosts=18.187.1.128,18.181.0.65 |
---|
[210] | 60 | |
---|
| 61 | |
---|
| 62 | |
---|
| 63 | # NRPE USER |
---|
| 64 | # This determines the effective user that the NRPE daemon should run as. |
---|
| 65 | # You can either supply a username or a UID. |
---|
| 66 | # |
---|
| 67 | # NOTE: This option is ignored if NRPE is running under either inetd or xinetd |
---|
| 68 | |
---|
| 69 | nrpe_user=nagios |
---|
| 70 | |
---|
| 71 | |
---|
| 72 | |
---|
| 73 | # NRPE GROUP |
---|
| 74 | # This determines the effective group that the NRPE daemon should run as. |
---|
| 75 | # You can either supply a group name or a GID. |
---|
| 76 | # |
---|
| 77 | # NOTE: This option is ignored if NRPE is running under either inetd or xinetd |
---|
| 78 | |
---|
| 79 | nrpe_group=nagios |
---|
| 80 | |
---|
| 81 | |
---|
| 82 | |
---|
| 83 | # COMMAND ARGUMENT PROCESSING |
---|
| 84 | # This option determines whether or not the NRPE daemon will allow clients |
---|
| 85 | # to specify arguments to commands that are executed. This option only works |
---|
| 86 | # if the daemon was configured with the --enable-command-args configure script |
---|
| 87 | # option. |
---|
| 88 | # |
---|
| 89 | # *** ENABLING THIS OPTION IS A SECURITY RISK! *** |
---|
| 90 | # Read the SECURITY file for information on some of the security implications |
---|
| 91 | # of enabling this variable. |
---|
| 92 | # |
---|
| 93 | # Values: 0=do not allow arguments, 1=allow command arguments |
---|
| 94 | |
---|
[1937] | 95 | dont_blame_nrpe=0 |
---|
[210] | 96 | |
---|
| 97 | |
---|
| 98 | |
---|
| 99 | # DEBUGGING OPTION |
---|
| 100 | # This option determines whether or not debugging messages are logged to the |
---|
| 101 | # syslog facility. |
---|
| 102 | # Values: 0=debugging off, 1=debugging on |
---|
| 103 | |
---|
| 104 | debug=0 |
---|
| 105 | |
---|
| 106 | |
---|
| 107 | |
---|
| 108 | # COMMAND TIMEOUT |
---|
| 109 | # This specifies the maximum number of seconds that the NRPE daemon will |
---|
| 110 | # allow plugins to finish executing before killing them off. |
---|
| 111 | |
---|
| 112 | command_timeout=60 |
---|
| 113 | |
---|
| 114 | |
---|
| 115 | |
---|
[1002] | 116 | # CONNECTION TIMEOUT |
---|
| 117 | # This specifies the maximum number of seconds that the NRPE daemon will |
---|
| 118 | # wait for a connection to be established before exiting. This is sometimes |
---|
| 119 | # seen where a network problem stops the SSL being established even though |
---|
| 120 | # all network sessions are connected. This causes the nrpe daemons to |
---|
| 121 | # accumulate, eating system resources. Do not set this too low. |
---|
| 122 | |
---|
| 123 | connection_timeout=300 |
---|
| 124 | |
---|
| 125 | |
---|
| 126 | |
---|
| 127 | # WEEK RANDOM SEED OPTION |
---|
| 128 | # This directive allows you to use SSL even if your system does not have |
---|
| 129 | # a /dev/random or /dev/urandom (on purpose or because the necessary patches |
---|
| 130 | # were not applied). The random number generator will be seeded from a file |
---|
| 131 | # which is either a file pointed to by the environment valiable $RANDFILE |
---|
| 132 | # or $HOME/.rnd. If neither exists, the pseudo random number generator will |
---|
| 133 | # be initialized and a warning will be issued. |
---|
| 134 | # Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness |
---|
| 135 | |
---|
| 136 | #allow_weak_random_seed=1 |
---|
| 137 | |
---|
| 138 | |
---|
| 139 | |
---|
[210] | 140 | # INCLUDE CONFIG FILE |
---|
| 141 | # This directive allows you to include definitions from an external config file. |
---|
| 142 | |
---|
| 143 | #include=<somefile.cfg> |
---|
| 144 | |
---|
| 145 | |
---|
| 146 | |
---|
| 147 | # INCLUDE CONFIG DIRECTORY |
---|
| 148 | # This directive allows you to include definitions from config files (with a |
---|
| 149 | # .cfg extension) in one or more directories (with recursion). |
---|
| 150 | |
---|
| 151 | #include_dir=<somedirectory> |
---|
| 152 | #include_dir=<someotherdirectory> |
---|
| 153 | |
---|
| 154 | |
---|
| 155 | |
---|
| 156 | # COMMAND DEFINITIONS |
---|
| 157 | # Command definitions that this daemon will run. Definitions |
---|
| 158 | # are in the following format: |
---|
| 159 | # |
---|
| 160 | # command[<command_name>]=<command_line> |
---|
| 161 | # |
---|
| 162 | # When the daemon receives a request to return the results of <command_name> |
---|
| 163 | # it will execute the command specified by the <command_line> argument. |
---|
| 164 | # |
---|
| 165 | # Unlike Nagios, the command line cannot contain macros - it must be |
---|
| 166 | # typed exactly as it should be executed. |
---|
| 167 | # |
---|
| 168 | # Note: Any plugins that are used in the command lines must reside |
---|
| 169 | # on the machine that this daemon is running on! The examples below |
---|
| 170 | # assume that you have plugins installed in a /usr/local/nagios/libexec |
---|
| 171 | # directory. Also note that you will have to modify the definitions below |
---|
| 172 | # to match the argument format the plugins expect. Remember, these are |
---|
| 173 | # examples only! |
---|
| 174 | |
---|
| 175 | # The following examples use hardcoded command arguments... |
---|
| 176 | |
---|
| 177 | #command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10 |
---|
| 178 | #command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20 |
---|
| 179 | command[check_disk1]=/usr/lib/nagios/plugins/check_disk -w 20 -c 10 -p /dev/hda1 |
---|
| 180 | command[check_disk2]=/usr/lib/nagios/plugins/check_disk -w 20 -c 10 -p /dev/hdb1 |
---|
| 181 | command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z |
---|
| 182 | command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200 |
---|
| 183 | |
---|
| 184 | # The following examples allow user-supplied arguments and can |
---|
| 185 | # only be used if the NRPE daemon was compiled with support for |
---|
| 186 | # command arguments *AND* the dont_blame_nrpe directive in this |
---|
| 187 | # config file is set to '1'... |
---|
| 188 | |
---|
[1935] | 189 | #command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$ |
---|
| 190 | #command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$ |
---|
| 191 | command[check_disk]=/usr/lib/nagios/plugins/check_disk -w 10% -c 5% |
---|
| 192 | #command[check_disk_p]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$ |
---|
| 193 | #command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ |
---|
| 194 | #command[check_procs_C]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -C $ARG3$ |
---|
| 195 | #command[check_procs_P]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -P $ARG3$ |
---|
| 196 | #command[check_procs_m]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -m $ARG3$ |
---|
| 197 | #command[check_procs_s]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$ |
---|
| 198 | #command[check_procs_u]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -u $ARG3$ |
---|
| 199 | #command[check_procs_z]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -z $ARG3$ |
---|
[210] | 200 | |
---|
[1002] | 201 | #command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$ |
---|
| 202 | #command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$ |
---|
| 203 | #command[check_disk]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$ |
---|
| 204 | #command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$ |
---|
[210] | 205 | |
---|
[1002] | 206 | # |
---|
| 207 | # local configuration: |
---|
| 208 | # if you'd prefer, you can instead place directives here |
---|
[210] | 209 | include=/etc/nagios/nrpe_local.cfg |
---|
[1002] | 210 | |
---|
| 211 | # |
---|
| 212 | # you can place your config snipplets into nrpe.d/ |
---|
| 213 | include_dir=/etc/nagios/nrpe.d/ |
---|
| 214 | |
---|
| 215 | |
---|