# syslog-ng configuration file. # # This should behave pretty much like the original syslog on RedHat. But # it could be configured a lot smarter. # # See syslog-ng(8) and syslog-ng.conf(5) for more information. # # 20000925 gb@sysfive.com # # Updated by Frank Crawford () - 10 Aug 2002 # - for Red Hat 7.3 # - totally do away with klogd # - add message "kernel:" as is done with klogd. # # Updated by Frank Crawford () - 22 Aug 2002 # - use the log_prefix option as per Balazs Scheidler's email # # Updated by Jose Pedro Oliveira () - 05 Apr 2003 # - corrected filters 'f_filter2' and 'f_filter6' # these filters were only allowing messages of one specific # priority level; they should be allowing messages from that # priority and upper levels. # # Updated by Jose Pedro Oliveira () - 25 Jan 2005 # - Don't sync the d_mail destination # # Updated by Jose Pedro Oliveira () - 01 Feb 2005 # - /proc/kmsg is a file not a pipe. # (https://lists.balabit.hu/pipermail/syslog-ng/2005-February/006963.html) # # Updated by Jose Pedro Oliveira () - 31 May 2007 # - increase the number of unix-stream max-connections (syslog-ng 2.0.4) # # Updated by Jose Pedro Oliveira () - 26 July 2007 # - revert previous unix-stream max-connections change # (the new unix-stream max-connections default in syslog-ng 2.0.5 is 256) # options { sync (0); time_reopen (10); log_fifo_size (1000); long_hostnames (off); use_dns (no); use_fqdn (no); create_dirs (no); keep_hostname (yes); }; source s_sys { file ("/proc/kmsg" log_prefix("kernel: ")); unix-stream ("/dev/log"); internal(); # udp(ip(0.0.0.0) port(514)); # tcp(ip(0.0.0.0) port(514)); }; destination d_cons { file("/dev/console"); }; destination d_mesg { file("/var/log/messages"); }; destination d_auth { file("/var/log/secure"); }; destination d_mail { file("/var/log/maillog" sync(10)); }; destination d_spol { file("/var/log/spooler"); }; destination d_boot { file("/var/log/boot.log"); }; destination d_cron { file("/var/log/cron"); }; destination d_mlal { usertty("*"); }; destination d_zroot { program("/etc/syslog-ng/d_zroot.pl"); }; #destination d_watch { program("/usr/local/libexec/watch-syslog.py"); }; #filter f_filter1 { facility(kern); }; filter f_filter2 { level(info..emerg) and not facility(mail,authpriv,cron); }; filter f_filter3 { facility(authpriv); }; filter f_filter4 { facility(mail); }; filter f_filter5 { level(emerg); }; filter f_filter6 { facility(uucp) or (facility(news) and level(crit..emerg)); }; filter f_filter7 { facility(local7); }; filter f_filter8 { facility(cron); }; filter f_oom { facility(kern) and (match("Out of memory:") or match("Killed process")); }; #log { source(s_sys); filter(f_filter1); destination(d_cons); }; log { source(s_sys); filter(f_filter2); destination(d_mesg); }; log { source(s_sys); filter(f_filter3); destination(d_auth); }; log { source(s_sys); filter(f_filter4); destination(d_mail); }; log { source(s_sys); filter(f_filter5); destination(d_mlal); }; log { source(s_sys); filter(f_filter6); destination(d_spol); }; log { source(s_sys); filter(f_filter7); destination(d_boot); }; log { source(s_sys); filter(f_filter8); destination(d_cron); }; log { source(s_sys); filter(f_filter3); destination(d_zroot); }; #log { source(s_sys); filter(f_filter2); destination(d_watch); }; log { source(s_sys); filter(f_oom); destination(d_zroot); }; # vim:set ai ts=4 sw=4 sts=4 et: