source: trunk/server/doc/install-howto.sh @ 1590

Last change on this file since 1590 was 1544, checked in by geofft, 15 years ago
Revert "install-howto.sh: Unpushed commit from February 8" As Mitch pointed out, you only need the sketchiness described here if you're installing a package on a running system, and this document is about the initial install. It was also lacking in clarity and so useless. This reverts r1542.
File size: 16.9 KB
Line 
1# This document is a how-to for installing a Fedora scripts.mit.edu server.
2
3set -e -x
4
5[ -e /scripts-boot-count ] || echo 0 > /scripts-boot-count
6
7source_server="old-faithful.mit.edu"
8
9boot=${1:$(cat /scripts-boot-count)}
10
11# XXX: let 'branch' be the current svn branch you are on
12
13doreboot() {
14    echo $(( $boot + 1 )) > /scripts-boot-count;
15    shutdown -r now "Rebooting for step $(cat /scripts-boot-count)"
16}
17
18YUM() {
19    NSS_NONLOCAL_IGNORE=1 yum "$@"
20}
21
22# Helper files for the install are located in server/fedora/config.
23
24# Start with a normal install of Fedora.
25
26if [ $boot = 0 ]; then
27# When the initial configuration screen comes up, under "Firewall
28# configuration", disable the firewall, and under "System services", leave
29# enabled (as of Fedora 9) acpid, anacron, atd, cpuspeed, crond,
30# firstboot, fuse, haldaemon, ip6tables, iptables, irqbalance,
31# kerneloops, mdmonitor, messagebus, microcode_ctl, netfs, network, nscd, ntpd,
32# sshd, udev-post, and nothing else.
33    echo "--disabled" > /etc/sysconfig/system-config-firewall
34    for i in NetworkManager avahi-daemon bluetooth cups isdn nfslock nfs pcscd restorecond rpcbind rpcgssd rpcidmapd sendmail; do
35        chkconfig "$i" off
36    done
37
38# Turn on network, so we can connect at boot
39chkconfig network on
40
41# Edit /etc/selinux/config so it has SELINUX=disabled and reboot.
42    sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config
43    doreboot
44fi
45
46if [ $boot = 1 ]; then
47# Create a scripts-build user account, and set up rpm to build in
48# $HOME by doing a
49# cp config/home/scripts-build/.rpmmacros /home/scripts-build/
50# (If you just use the default setup, it will generate packages
51# in /usr/src/redhat.)
52    adduser scripts-build
53
54# Check out the scripts.mit.edu svn repository. Configure svn not to cache
55# credentials.
56
57    YUM install -y subversion
58
59    cd /srv
60    svn co svn://$source_server/$branch repository
61
62    sed -i 's/^(# *)*store-passwords.*/store-passwords = no/' /root/.subversion/config
63    sed -i 's/^(# *)*store-auth-creds.*/store-auth-creds = no/' /root/.subversion/config
64# The same tweaks should be made on /home/scripts-build/.subversion/config
65# once it exists (do something with svn as scripts-build)
66
67    chown -R scripts-build /srv/repository
68
69# cd to server/fedora in the svn repository.
70    cd /srv/repository/server/fedora
71
72# Run "make install-deps" to install various prereqs.  Nonstandard
73# deps are in /mit/scripts/rpm.
74    YUM install -y make
75    make install-deps
76
77# Install bind
78    YUM install -y bind
79
80# Check out the scripts /etc configuration
81    cd /root
82    svn co svn://scripts.mit.edu/$branch/server/fedora/config/etc etc
83    # backslash to make us not use the alias
84    \cp -a etc /
85
86# NOTE: You will have just lost DNS resolution and the ability
87# to do password SSH in.  If you managed to botch this step without
88# having named setup, you can do a quick fix by frobbing /etc/resolv.conf
89# with a non 127.0.0.1 address for the DNS server.  Be sure to revert it once
90# you have named.
91
92    service named start
93    chkconfig named on
94
95# In the case of the Kerberos libraries, you'll be told that
96# there are conflicting files with the 64-bit versions of the packages,
97# which we scriptsify.  You'll have to use --force to install those
98# rpms despite the conflicts.  After doing that, you may want to
99# install the corresponding 64-bit scriptsified versions again, just
100# to be safe in case the 32-bit versions overwrite files that differ.
101# When you try this, it will complain that you already have the same
102# version installed; again, you'll need to use --force to do it anyway.
103
104# We need yumdownloader to force some RPMs
105    # XXX: This might be wrong. Sanity check what packages ou
106    # have when done
107    YUM install -y yum-utils
108    yumdownloader krb5-libs
109    # XXX: These version numbers are hardcoded, need some cli-fu to generalize
110    rpm -i krb5-libs-*.i586.rpm
111    rpm -U --force krb5-libs-*.scripts.1138.x86_64.rpm
112
113# env NSS_NONLOCAL_IGNORE=1 yum install scripts-base
114    YUM install -y scripts-base
115
116# Remember to set NSS_NONLOCAL_IGNORE=1 anytime you're setting up
117# anything, e.g. using yum. Otherwise useradd will query LDAP in a stupid way
118# that makes it hang forever. (This is why we're using YUM, not yum)
119
120# Reload the iptables config to take down the restrictive firewall
121    service iptables restart
122
123# Copy over root's dotfiles from one of the other machines.
124# Perhaps a useful change is to remove the default aliases
125    # On 2009-07-01, the dotfiles to transfer where:
126    #   .bashrc .ldapvirc (<- HAS PRIVILEDGED DATA)
127    #   .screenrc .ssh (<- directory) .vimrc
128    # Trying to scp from server to server won't work, as scp
129    # will attempt to negotiate a server-to-server connection.
130    # Instead, scp to your trusted machine as a temporary file,
131    # and then push to the other server
132    # You'll need some way to authenticate to the server, and since
133    # password logins are disabled, you'll need some way of
134    # temporarily giving yourself credentials.  On a test server,
135    # reenabling password authentication is ok: frob /etc/pam.d/sshd
136    # and reverse apply r1068.
137
138# Replace rsyslog with syslog-ng by doing:
139    rpm -e --nodeps rsyslog
140    YUM install -y syslog-ng
141    chkconfig syslog-ng on
142
143# Install various dependencies of the scripts system, including
144# glibc-devel.i586 (ezyang: already installed for me),
145# python-twisted-core (ditto), mod_fcgid, nrpe, nagios-plugins-all.
146    YUM install -y mod_fcgid
147    YUM install -y nrpe
148    YUM install -y nagios-plugins-all
149
150# Disable NetworkManager with chkconfig NetworkManager off. Configure
151# networking on the front end and back end, and the routing table to send
152# traffic over the back end. Make sure that chkconfig reports "network" on, so
153# that the network will still be configured at next boot.
154# ezyang: For me, NetworkManager was not installed at this point, and
155# we had already done the basic config for networking front end and
156# back end (because I wanted ssh access, and not just conserver access)
157
158# Fix the openafs /usr/vice/etc <-> /etc/openafs mapping by changing
159#  /usr/vice/etc/cacheinfo to contain:
160#       /afs:/usr/vice/cache:10000000
161# Also fix ThisCell to contain athena.mit.edu in both directories
162# WARNING: if you're installing a test server, this needs to be much
163# smaller; the max filesize on XVM is 10GB.  Pick something like
164# 500000
165    echo "/afs:/usr/vice/cache:10000000" > /usr/vice/etc/cacheinfo
166    # ezyang: ThisCell on b-k and c-w don't have anything special
167    # written here
168# If you're making a test server, some of the AFS parameters are
169# kind of retarded (and if you're low on disk space, will actually
170# exhaust our inodes).
171# Edit the parameters in /etc/sysconfig/openafs
172
173# Figure out why Zephyr isn't working. Most recently, it was because there
174# was a 64-bit RPM installed; remove it and install Joe's 32-bit one
175    YUM erase -y mit-zephyr
176    # mit-zephyr has a spurious dependency on mit-krb-config
177    yumdownloader mit-zephyr.i386
178    # if deps change, this breaks
179    YUM install -y libXaw.i586 libXext.i586 libXmu.i586 ncurses-libs.i586 readline.i586
180    rpm -i --nodeps mit-zephyr-2.1-6-linux.i386.rpm
181    # test if it worked by sending an un-authed message
182    zwrite -d -c scripts -i test
183
184# Install the athena-base, athena-lprng, and athena-lprng-misc RPMs
185# from the Athena 9 build (these are present in our yum repo).  Note
186# that you will have to use --nodeps for at least one of the lprng
187# ones because it thinks it needs the Athena hesiod RPM.  It doesn't
188# really.  Before doing this, run it without --nodeps and arrange to
189# install the rest of the things it really does depend on.  This will
190# include a bunch of 32-bit rpms; go ahead and install the .i586 versions
191# of them.
192    YUM install -y athena-base
193    YUM install -y athena-lprng
194    yumdownloader athena-lprng-misc
195    # ezyang: I couldn't find any deps for this that existed in the repos
196    # You might get a "find: `/usr/athena/info': No such file or directory"
197    # error; this is fine
198    rpm -i --nodeps athena-lprng-misc-9.4-0.i386.rpm
199
200# Install the full list of RPMs that users expect to be on the
201# scripts.mit.edu servers.
202
203# on another server, run:
204rpm -qa --queryformat "%{Name}.%{Arch}\n" | sort > packages.txt
205# arrange for packages.txt to be passed to the server, then run:
206    # notice that yum is not capitalized
207    # Also notice skip-broken
208    cat packages.txt | NSS_NONLOCAL_IGNORE=1 xargs yum install -y --skip-broken
209
210# Check which packages are installed on your new server that are not
211# in the snapshot, and remove ones that aren't needed for some reason
212# on the new machine.  Otherwise, aside from bloat, you may end up
213# with undesirable things for security, like sendmail.
214    rpm -qa --queryformat "%{Name}.%{Arch}\n" | sort > newpackages.txt
215    diff -u packages.txt newpackages.txt  | less
216    # if all went well, you'll probably see multiple kernel versions
217    # as the only diff
218    # ezyang: I got exim installed as another package
219    # here's a cute script that removes all extra packages
220    diff -u packages.txt newpackages.txt  | grep '+' | cut -c2- | grep -v "@" | grep -v "++" | xargs yum erase -y
221
222# Check out the scripts /usr/vice/etc configuration
223    cd /root
224    mkdir vice
225    cd vice
226    svn co svn://scripts.mit.edu/trunk/server/fedora/config/usr/vice/etc etc
227    \cp -a etc /usr/vice
228
229# Install the full list of perl modules that users expect to be on the
230# scripts.mit.edu servers.
231# - export PERL_MM_USE_DEFAULT=1
232# - Run 'cpan', accept the default configuration, and do 'o conf
233#   prerequisites_policy follow'.
234# - Parse the output of perldoc -u perllocal | grep head2 on an existing
235#   server, and "notest install" them from the cpan prompt.
236# TO DO THIS:
237# On another server, run:
238# perldoc -u perllocal | grep head2 | cut -f 3 -d '<' | cut -f 1 -d '|' | sort -u | perl -ne 'chomp; print "notest install $_\n" if system("rpm -q --whatprovides \"perl($_)\" >/dev/null 2>/dev/null")' > /mit/scripts/config/perl-packages.txt
239# Then on the server you're installing,
240#    cat perl-packages.txt | perl -MCPAN -e shell
241    export PERL_MM_USE_DEFAULT=1
242    # XXX: Some interactive gobbeldygook
243    cpan
244        o conf prerequisites_policy follow
245        o conf commit
246# on a reference server
247perldoc -u perllocal | grep head2 | cut -f 3 -d '<' | cut -f 1 -d '|' | sort -u | perl -ne 'chomp; print "notest install $_\n" if system("rpm -q --whatprovides \"perl($_)\" >/dev/null 2>/dev/null")' > perl-packages.txt
248# arrange for perl-packages.txt to be transferred to server
249    cat perl-packages.txt | perl -MCPAN -e shell
250
251# Install the Python eggs and Ruby gems and PEAR/PECL doohickeys that are on
252# the other scripts.mit.edu servers and do not have RPMs.
253# The general mode of operation will be to run the "list" command
254# on both servers, see what the differences are, check if those diffs
255# are packaged up as rpms, and install them (rpm if possible, native otherwise)
256# - Look at /usr/lib/python2.6/site-packages and
257#           /usr/lib64/python2.6/site-packages for Python eggs and modules.
258#   There will be a lot of gunk that was installed from packages;
259#   easy-install.pth will tell you what was easy_installed.
260#   First use 'yum search' to see if the relevant package is now available
261#   as an RPM, and install that if it is.  If not, then use easy_install.
262#   Pass -Z to easy_install to install them unzipped, as some zipped eggs
263#   want to be able to write to ~/.python-eggs.  (Also makes sourcediving
264#   easier.)
265# - Look at `gem list` for Ruby gems.
266#   Again, use 'yum search' and prefer RPMs, but failing that, 'gem install'.
267#       ezyang: rspec-rails depends on rspec, and will override the Yum
268#       package, so... don't use that RPM yet
269# - Look at `pear list` for Pear fruits (or whatever they're called).
270#   Yet again, 'yum search' for RPMs before resorting to 'pear install'.  Note
271#   that for things in the beta repo, you'll need 'pear install package-beta'.
272#   (you might get complaints about the php_scripts module; ignore them)
273# - Look at `pecl list` for PECL things.  'yum search', and if you must,
274#   'pecl install' needed items. If it doesn't work, try 'pear install
275#   pecl/foo' or 'pecl install foo-beta' or those two combined.
276    # Automating this... will require a lot of batonning between
277    # the servers. Probably best way to do it is to write an actual
278    # script.
279
280# Setup some Python config
281    echo 'import site, os.path; site.addsitedir(os.path.expanduser("~/lib/python2.6/site-packages"))' > /usr/lib/python2.6/site-packages/00scripts-home.pth
282
283# Install the credentials.  There are a lot of things to remember here:
284#   o This will be different if you're setting up our build/update server.
285#   o You probably installed the machine keytab long ago
286    ls -l /etc/krb5.keytab
287#   o Use ktutil to combine the host/scripts.mit.edu and
288#     host/scripts-vhosts.mit.edu keys with host/this-server.mit.edu in
289#     the keytab.  Do not use 'k5srvutil change' on the combined keytab
290#     or you'll break the other servers. (real servers only)
291#   o The daemon.scripts keytab
292    ls -l /etc/daemon.keytab
293#   o The SSL cert private key (real servers only)
294#   o The LDAP password for the signup process (real servers only)
295#   o The SQL password for the signup process (real servers only)
296#   o The whoisd password (real servers only)
297#   o The LDAP keytab for this server, which will be used later (real servers only)
298#   o Replace the ssh host keys with the ones common to all scripts servers (real servers only)
299#   o You'll install an LDAP certificate signed by the scripts CA later (real servers only)
300#   o Make sure root's .k5login is correct
301    cat /root/.k5login
302#   o Make sure logview's .k5login is correct (real servers only)
303
304# If you are setting up a test server, pay attention to
305# /etc/sysconfig/network-scripts and do not bind scripts' IP address.
306# You will also need to modify:
307#   o /etc/ldap.conf
308#       add: host scripts.mit.edu
309#   o /etc/nss-ldapd.conf
310#       replace: uri *****
311#       with: uri ldap://scripts.mit.edu/
312#   o /etc/openldap/ldap.conf
313#       add: URI ldap://scripts.mit.edu/
314#            BASE dc=scripts,dc=mit,dc=edu
315#   o /etc/httpd/conf.d/vhost_ldap.conf
316#       replace: VhostLDAPUrl ****
317#       with: VhostLDAPUrl "ldap://scripts.mit.edu/ou=VirtualHosts,dc=scripts,dc=mit,dc=edu"
318#   o /etc/postfix/virtual-alias-{domains,maps}-ldap.cf
319#       replace: server_host *****
320#       with: server_host = ldap://scripts.mit.edu
321# to use scripts.mit.edu instead of localhost.
322# XXX: someone should write sed scripts to do this
323
324# If you are setting up a test server, afsagent's cronjob will attempt
325# to be renewing with the wrong credentials (daemon.scripts). Change this:
326    vim /home/afsagent/renew # replace all mentions of daemon.scripts.mit.edu
327
328# Install 389-ds-base and set up replication (see ./HOWTO-SETUP-LDAP
329#   and ./389-ds-enable-ssl-and-kerberos.diff).
330
331# Make the services dirsrv, nslcd, nscd, postfix, and httpd start at
332# boot. Run chkconfig to make sure the set of services to be run is
333# correct.
334    chkconfig dirsrv on
335    chkconfig nslcd on
336    chkconfig nscd on
337    chkconfig postfix on
338    chkconfig httpd on
339
340# Postfix doesn't actually deliver mail; fix this
341    cd /etc/postfix
342    postmap virtual
343
344# Munin might not be monitoring packages that were installed after it
345    munin-node-configure --suggest --shell | sh
346
347# Run fmtutil-sys --all, which does something that makes TeX work.
348    fmtutil-sys --all
349    # ezyang: I got errors on xetex
350
351# Ensure that PHP isn't broken:
352    mkdir /tmp/sessions
353    chmod 01777 /tmp/sessions
354
355# Ensure fcgid isn't broken
356    chmod 755 /var/run/mod_fcgid # ezyang: I suspect this is no longer necessary
357
358# Fix etc by making sure none of our config files got overwritten
359    cd /etc
360    svn status | grep M
361    # ezyang: I had to revert krb5.conf (not with latest), nsswitch.conf and sysconfig/openafs
362
363# ThisCell got clobbered, replace it with athena.mit.edu
364    echo "athena.mit.edu" > /usr/vice/etc/ThisCell
365
366# Reboot the machine to restore a consistent state, in case you
367# changed anything.
368    # ezyang: When I rebooted, the following things happened:
369    #   o Starting kdump failed (this is ok)
370    #   o postfix mailbombed us
371    #   o firstboot configuration screen popped up (ignored; manually will do
372    #     chkconfig after the fact)
373
374# (Optional) Beat your head against a wall.
375
376# Possibly perform other steps that I've neglected to put in this
377# document.
378#   o For some reason, syslog-ng wasn't turning on automatically, so we weren't
379#     getting spew
380
381# Some info about changing hostnames: it appears to be in:
382#   o /etc/sysconfig/network
383#   o your lvm thingies; probably don't need to edit
384
385# More stuff for test servers
386#   - You need a self-signed SSL cert.  Generate with:
387    openssl req -new -x509 -keyout /etc/pki/tls/private/scripts.key -out /etc/pki/tls/certs/scripts.cert -nodes
388#     Also make /etc/pki/tls/certs/ca.pem match up
389#   - Make (/etc/aliases) root mail go to /dev/null, so we don't spam people
390#   - Edit /etc/httpd/conf.d/scripts-vhost-names.conf to have scripts-fX-test.xvm.mit.edu
391#     be an accepted vhost name
392#   - Look at the old test server and see what config changes are floating around
Note: See TracBrowser for help on using the repository browser.