source: noc/nagios/nagios.cfg @ 738

Last change on this file since 738 was 718, checked in by quentin, 17 years ago
Place resource.cfg inside the private subdirectory
File size: 30.2 KB
Line 
1##############################################################################
2#
3# NAGIOS.CFG - Main Config File for Nagios
4#
5##############################################################################
6
7
8# LOG FILE
9# This is the main log file where service and host events are logged
10# for historical purposes.  This should be the first option specified
11# in the config file!!!
12
13log_file=/var/log/nagios2/nagios.log
14
15
16
17# OBJECT CONFIGURATION FILE(S)
18# This is the configuration file in which you define hosts, host
19# groups, contacts, contact groups, services, etc.  I guess it would
20# be better called an object definition file, but for historical
21# reasons it isn't.  You can split object definitions into several
22# different config files by using multiple cfg_file statements here.
23# Nagios will read and process all the config files you define.
24# This can be very useful if you want to keep command definitions
25# separate from host and contact definitions...
26
27# Plugin commands (service and host check commands)
28# Arguments are likely to change between different releases of the
29# plugins, so you should use the same config file provided with the
30# plugin release rather than the one provided with Nagios.
31cfg_file=/etc/nagios2/checkcommands.cfg
32
33# Debian also defaults to using the check commands defined by the debian
34# nagios-plugins package
35cfg_dir=/etc/nagios-plugins/config
36
37# Misc commands (notification and event handler commands, etc)
38cfg_file=/etc/nagios2/misccommands.cfg
39
40# You can split other types of object definitions across several
41# config files if you wish (as done here), or keep them all in a
42# single config file.
43
44cfg_file=/etc/nagios2/base.cfg
45
46#cfg_file=/etc/nagios2/contactgroups.cfg
47cfg_file=/etc/nagios2/contacts.cfg
48#cfg_file=/etc/nagios2/dependencies.cfg
49#cfg_file=/etc/nagios2/escalations.cfg
50cfg_file=/etc/nagios2/hostgroups.cfg
51cfg_file=/etc/nagios2/hosts.cfg
52cfg_file=/etc/nagios2/services.cfg
53#cfg_file=/etc/nagios2/timeperiods.cfg
54
55# Extended host/service info definitions are now stored along with
56# other object definitions:
57#cfg_file=/etc/nagios2/hostextinfo.cfg
58#cfg_file=/etc/nagios2/serviceextinfo.cfg
59
60# You can also tell Nagios to process all config files (with a .cfg
61# extension) in a particular directory by using the cfg_dir
62# directive as shown below:
63
64#cfg_dir=/etc/nagios2/servers
65#cfg_dir=/etc/nagios2/printers
66#cfg_dir=/etc/nagios2/switches
67#cfg_dir=/etc/nagios2/routers
68
69
70
71# OBJECT CACHE FILE
72# This option determines where object definitions are cached when
73# Nagios starts/restarts.  The CGIs read object definitions from
74# this cache file (rather than looking at the object config files
75# directly) in order to prevent inconsistencies that can occur
76# when the config files are modified after Nagios starts.
77
78object_cache_file=/var/cache/nagios2/objects.cache
79
80
81
82# RESOURCE FILE
83# This is an optional resource file that contains $USERx$ macro
84# definitions. Multiple resource files can be specified by using
85# multiple resource_file definitions.  The CGIs will not attempt to
86# read the contents of resource files, so information that is
87# considered to be sensitive (usernames, passwords, etc) can be
88# defined as macros in this file and restrictive permissions (600)
89# can be placed on this file.
90
91resource_file=/etc/nagios2/private/resource.cfg
92
93
94
95# STATUS FILE
96# This is where the current status of all monitored services and
97# hosts is stored.  Its contents are read and processed by the CGIs.
98# The contents of the status file are deleted every time Nagios
99#  restarts.
100
101status_file=/var/cache/nagios2/status.dat
102
103
104
105# NAGIOS USER
106# This determines the effective user that Nagios should run as. 
107# You can either supply a username or a UID.
108
109nagios_user=nagios
110
111
112
113# NAGIOS GROUP
114# This determines the effective group that Nagios should run as. 
115# You can either supply a group name or a GID.
116
117nagios_group=nagios
118
119
120
121# EXTERNAL COMMAND OPTION
122# This option allows you to specify whether or not Nagios should check
123# for external commands (in the command file defined below).  By default
124# Nagios will *not* check for external commands, just to be on the
125# cautious side.  If you want to be able to use the CGI command interface
126# you will have to enable this.  Setting this value to 0 disables command
127# checking (the default), other values enable it.
128
129check_external_commands=1
130
131
132
133# EXTERNAL COMMAND CHECK INTERVAL
134# This is the interval at which Nagios should check for external commands.
135# This value works of the interval_length you specify later.  If you leave
136# that at its default value of 60 (seconds), a value of 1 here will cause
137# Nagios to check for external commands every minute.  If you specify a
138# number followed by an "s" (i.e. 15s), this will be interpreted to mean
139# actual seconds rather than a multiple of the interval_length variable.
140# Note: In addition to reading the external command file at regularly
141# scheduled intervals, Nagios will also check for external commands after
142# event handlers are executed.
143# NOTE: Setting this value to -1 causes Nagios to check the external
144# command file as often as possible.
145
146#command_check_interval=1
147command_check_interval=1s
148#command_check_interval=-1
149
150
151
152# EXTERNAL COMMAND FILE
153# This is the file that Nagios checks for external command requests.
154# It is also where the command CGI will write commands that are submitted
155# by users, so it must be writeable by the user that the web server
156# is running as (usually 'nobody').  Permissions should be set at the
157# directory level instead of on the file, as the file is deleted every
158# time its contents are processed.
159# Debian Users: In case you didn't read README.Debian yet, _NOW_ is the
160# time to do it.
161
162command_file=/var/lib/nagios2/rw/nagios.cmd
163
164
165
166# COMMENT FILE
167# This is the file that Nagios will use for storing host and service
168# comments.
169
170comment_file=/var/lib/nagios2/comments.dat
171
172
173
174# DOWNTIME FILE
175# This is the file that Nagios will use for storing host and service
176# downtime data.
177
178downtime_file=/var/lib/nagios2/downtime.dat
179
180
181
182# LOCK FILE
183# This is the lockfile that Nagios will use to store its PID number
184# in when it is running in daemon mode.
185
186lock_file=/var/run/nagios2/nagios2.pid
187
188
189
190# TEMP FILE
191# This is a temporary file that is used as scratch space when Nagios
192# updates the status log, cleans the comment file, etc.  This file
193# is created, used, and deleted throughout the time that Nagios is
194# running.
195
196temp_file=/var/cache/nagios2/nagios.tmp
197
198
199
200# EVENT BROKER OPTIONS
201# Controls what (if any) data gets sent to the event broker.
202# Values:  0      = Broker nothing
203#         -1      = Broker everything
204#         <other> = See documentation
205
206event_broker_options=-1
207
208
209
210# EVENT BROKER MODULE(S)
211# This directive is used to specify an event broker module that should
212# by loaded by Nagios at startup.  Use multiple directives if you want
213# to load more than one module.  Arguments that should be passed to
214# the module at startup are seperated from the module path by a space.
215#
216# Example:
217#
218#   broker_module=<modulepath> [moduleargs]
219
220#broker_module=/somewhere/module1.o
221#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0
222
223
224
225
226# LOG ROTATION METHOD
227# This is the log rotation method that Nagios should use to rotate
228# the main log file. Values are as follows..
229#       n       = None - don't rotate the log
230#       h       = Hourly rotation (top of the hour)
231#       d       = Daily rotation (midnight every day)
232#       w       = Weekly rotation (midnight on Saturday evening)
233#       m       = Monthly rotation (midnight last day of month)
234
235log_rotation_method=d
236
237
238
239# LOG ARCHIVE PATH
240# This is the directory where archived (rotated) log files should be
241# placed (assuming you've chosen to do log rotation).
242
243log_archive_path=/var/log/nagios2/archives
244
245
246
247# LOGGING OPTIONS
248# If you want messages logged to the syslog facility, as well as the
249# NetAlarm log file set this option to 1.  If not, set it to 0.
250
251use_syslog=0
252
253
254
255# NOTIFICATION LOGGING OPTION
256# If you don't want notifications to be logged, set this value to 0.
257# If notifications should be logged, set the value to 1.
258
259log_notifications=1
260
261
262
263# SERVICE RETRY LOGGING OPTION
264# If you don't want service check retries to be logged, set this value
265# to 0.  If retries should be logged, set the value to 1.
266
267log_service_retries=1
268
269
270
271# HOST RETRY LOGGING OPTION
272# If you don't want host check retries to be logged, set this value to
273# 0.  If retries should be logged, set the value to 1.
274
275log_host_retries=1
276
277
278
279# EVENT HANDLER LOGGING OPTION
280# If you don't want host and service event handlers to be logged, set
281# this value to 0.  If event handlers should be logged, set the value
282# to 1.
283
284log_event_handlers=1
285
286
287
288# INITIAL STATES LOGGING OPTION
289# If you want Nagios to log all initial host and service states to
290# the main log file (the first time the service or host is checked)
291# you can enable this option by setting this value to 1.  If you
292# are not using an external application that does long term state
293# statistics reporting, you do not need to enable this option.  In
294# this case, set the value to 0.
295
296log_initial_states=0
297
298
299
300# EXTERNAL COMMANDS LOGGING OPTION
301# If you don't want Nagios to log external commands, set this value
302# to 0.  If external commands should be logged, set this value to 1.
303# Note: This option does not include logging of passive service
304# checks - see the option below for controlling whether or not
305# passive checks are logged.
306
307log_external_commands=1
308
309
310
311# PASSIVE CHECKS LOGGING OPTION
312# If you don't want Nagios to log passive host and service checks, set
313# this value to 0.  If passive checks should be logged, set
314# this value to 1.
315
316log_passive_checks=1
317
318
319
320# GLOBAL HOST AND SERVICE EVENT HANDLERS
321# These options allow you to specify a host and service event handler
322# command that is to be run for every host or service state change.
323# The global event handler is executed immediately prior to the event
324# handler that you have optionally specified in each host or
325# service definition. The command argument is the short name of a
326# command definition that you define in your host configuration file.
327# Read the HTML docs for more information.
328
329#global_host_event_handler=somecommand
330#global_service_event_handler=somecommand
331
332
333
334# SERVICE INTER-CHECK DELAY METHOD
335# This is the method that Nagios should use when initially
336# "spreading out" service checks when it starts monitoring.  The
337# default is to use smart delay calculation, which will try to
338# space all service checks out evenly to minimize CPU load.
339# Using the dumb setting will cause all checks to be scheduled
340# at the same time (with no delay between them)!  This is not a
341# good thing for production, but is useful when testing the
342# parallelization functionality.
343#       n       = None - don't use any delay between checks
344#       d       = Use a "dumb" delay of 1 second between checks
345#       s       = Use "smart" inter-check delay calculation
346#       x.xx    = Use an inter-check delay of x.xx seconds
347
348service_inter_check_delay_method=s
349
350
351
352# MAXIMUM SERVICE CHECK SPREAD
353# This variable determines the timeframe (in minutes) from the
354# program start time that an initial check of all services should
355# be completed.  Default is 30 minutes.
356
357max_service_check_spread=30
358
359
360
361# SERVICE CHECK INTERLEAVE FACTOR
362# This variable determines how service checks are interleaved.
363# Interleaving the service checks allows for a more even
364# distribution of service checks and reduced load on remote
365# hosts.  Setting this value to 1 is equivalent to how versions
366# of Nagios previous to 0.0.5 did service checks.  Set this
367# value to s (smart) for automatic calculation of the interleave
368# factor unless you have a specific reason to change it.
369#       s       = Use "smart" interleave factor calculation
370#       x       = Use an interleave factor of x, where x is a
371#                 number greater than or equal to 1.
372
373service_interleave_factor=s
374
375
376
377# HOST INTER-CHECK DELAY METHOD
378# This is the method that Nagios should use when initially
379# "spreading out" host checks when it starts monitoring.  The
380# default is to use smart delay calculation, which will try to
381# space all host checks out evenly to minimize CPU load.
382# Using the dumb setting will cause all checks to be scheduled
383# at the same time (with no delay between them)!
384#       n       = None - don't use any delay between checks
385#       d       = Use a "dumb" delay of 1 second between checks
386#       s       = Use "smart" inter-check delay calculation
387#       x.xx    = Use an inter-check delay of x.xx seconds
388
389host_inter_check_delay_method=s
390
391
392
393# MAXIMUM HOST CHECK SPREAD
394# This variable determines the timeframe (in minutes) from the
395# program start time that an initial check of all hosts should
396# be completed.  Default is 30 minutes.
397
398max_host_check_spread=30
399
400
401
402# MAXIMUM CONCURRENT SERVICE CHECKS
403# This option allows you to specify the maximum number of
404# service checks that can be run in parallel at any given time.
405# Specifying a value of 1 for this variable essentially prevents
406# any service checks from being parallelized.  A value of 0
407# will not restrict the number of concurrent checks that are
408# being executed.
409
410max_concurrent_checks=0
411
412
413
414# SERVICE CHECK REAPER FREQUENCY
415# This is the frequency (in seconds!) that Nagios will process
416# the results of services that have been checked.
417
418service_reaper_frequency=10
419
420
421
422
423# AUTO-RESCHEDULING OPTION
424# This option determines whether or not Nagios will attempt to
425# automatically reschedule active host and service checks to
426# "smooth" them out over time.  This can help balance the load on
427# the monitoring server. 
428# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
429# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
430
431auto_reschedule_checks=0
432
433
434
435# AUTO-RESCHEDULING INTERVAL
436# This option determines how often (in seconds) Nagios will
437# attempt to automatically reschedule checks.  This option only
438# has an effect if the auto_reschedule_checks option is enabled.
439# Default is 30 seconds.
440# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
441# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
442
443auto_rescheduling_interval=30
444
445
446
447
448# AUTO-RESCHEDULING WINDOW
449# This option determines the "window" of time (in seconds) that
450# Nagios will look at when automatically rescheduling checks.
451# Only host and service checks that occur in the next X seconds
452# (determined by this variable) will be rescheduled. This option
453# only has an effect if the auto_reschedule_checks option is
454# enabled.  Default is 180 seconds (3 minutes).
455# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
456# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
457
458auto_rescheduling_window=180
459
460
461
462# SLEEP TIME
463# This is the number of seconds to sleep between checking for system
464# events and service checks that need to be run.
465
466sleep_time=0.25
467
468
469
470# TIMEOUT VALUES
471# These options control how much time Nagios will allow various
472# types of commands to execute before killing them off.  Options
473# are available for controlling maximum time allotted for
474# service checks, host checks, event handlers, notifications, the
475# ocsp command, and performance data commands.  All values are in
476# seconds.
477
478service_check_timeout=60
479host_check_timeout=30
480event_handler_timeout=30
481notification_timeout=30
482ocsp_timeout=5
483perfdata_timeout=30
484
485
486
487# RETAIN STATE INFORMATION
488# This setting determines whether or not Nagios will save state
489# information for services and hosts before it shuts down.  Upon
490# startup Nagios will reload all saved service and host state
491# information before starting to monitor.  This is useful for
492# maintaining long-term data on state statistics, etc, but will
493# slow Nagios down a bit when it (re)starts.  Since its only
494# a one-time penalty, I think its well worth the additional
495# startup delay.
496
497retain_state_information=1
498
499
500
501# STATE RETENTION FILE
502# This is the file that Nagios should use to store host and
503# service state information before it shuts down.  The state
504# information in this file is also read immediately prior to
505# starting to monitor the network when Nagios is restarted.
506# This file is used only if the preserve_state_information
507# variable is set to 1.
508
509state_retention_file=/var/lib/nagios2/retention.dat
510
511
512
513# RETENTION DATA UPDATE INTERVAL
514# This setting determines how often (in minutes) that Nagios
515# will automatically save retention data during normal operation.
516# If you set this value to 0, Nagios will not save retention
517# data at regular interval, but it will still save retention
518# data before shutting down or restarting.  If you have disabled
519# state retention, this option has no effect.
520
521retention_update_interval=60
522
523
524
525# USE RETAINED PROGRAM STATE
526# This setting determines whether or not Nagios will set
527# program status variables based on the values saved in the
528# retention file.  If you want to use retained program status
529# information, set this value to 1.  If not, set this value
530# to 0.
531
532use_retained_program_state=1
533
534
535
536# USE RETAINED SCHEDULING INFO
537# This setting determines whether or not Nagios will retain
538# the scheduling info (next check time) for hosts and services
539# based on the values saved in the retention file.  If you
540# If you want to use retained scheduling info, set this
541# value to 1.  If not, set this value to 0.
542
543use_retained_scheduling_info=0
544
545
546
547# INTERVAL LENGTH
548# This is the seconds per unit interval as used in the
549# host/contact/service configuration files.  Setting this to 60 means
550# that each interval is one minute long (60 seconds).  Other settings
551# have not been tested much, so your mileage is likely to vary...
552
553interval_length=30
554
555
556
557# AGGRESSIVE HOST CHECKING OPTION
558# If you don't want to turn on aggressive host checking features, set
559# this value to 0 (the default).  Otherwise set this value to 1 to
560# enable the aggressive check option.  Read the docs for more info
561# on what aggressive host check is or check out the source code in
562# base/checks.c
563
564use_aggressive_host_checking=0
565
566
567
568# SERVICE CHECK EXECUTION OPTION
569# This determines whether or not Nagios will actively execute
570# service checks when it initially starts.  If this option is
571# disabled, checks are not actively made, but Nagios can still
572# receive and process passive check results that come in.  Unless
573# you're implementing redundant hosts or have a special need for
574# disabling the execution of service checks, leave this enabled!
575# Values: 1 = enable checks, 0 = disable checks
576
577execute_service_checks=1
578
579
580
581# PASSIVE SERVICE CHECK ACCEPTANCE OPTION
582# This determines whether or not Nagios will accept passive
583# service checks results when it initially (re)starts.
584# Values: 1 = accept passive checks, 0 = reject passive checks
585
586accept_passive_service_checks=1
587
588
589
590# HOST CHECK EXECUTION OPTION
591# This determines whether or not Nagios will actively execute
592# host checks when it initially starts.  If this option is
593# disabled, checks are not actively made, but Nagios can still
594# receive and process passive check results that come in.  Unless
595# you're implementing redundant hosts or have a special need for
596# disabling the execution of host checks, leave this enabled!
597# Values: 1 = enable checks, 0 = disable checks
598
599execute_host_checks=1
600
601
602
603# PASSIVE HOST CHECK ACCEPTANCE OPTION
604# This determines whether or not Nagios will accept passive
605# host checks results when it initially (re)starts.
606# Values: 1 = accept passive checks, 0 = reject passive checks
607
608accept_passive_host_checks=1
609
610
611
612# NOTIFICATIONS OPTION
613# This determines whether or not Nagios will sent out any host or
614# service notifications when it is initially (re)started.
615# Values: 1 = enable notifications, 0 = disable notifications
616
617enable_notifications=1
618
619
620
621# EVENT HANDLER USE OPTION
622# This determines whether or not Nagios will run any host or
623# service event handlers when it is initially (re)started.  Unless
624# you're implementing redundant hosts, leave this option enabled.
625# Values: 1 = enable event handlers, 0 = disable event handlers
626
627enable_event_handlers=1
628
629
630
631# PROCESS PERFORMANCE DATA OPTION
632# This determines whether or not Nagios will process performance
633# data returned from service and host checks.  If this option is
634# enabled, host performance data will be processed using the
635# host_perfdata_command (defined below) and service performance
636# data will be processed using the service_perfdata_command (also
637# defined below).  Read the HTML docs for more information on
638# performance data.
639# Values: 1 = process performance data, 0 = do not process performance data
640
641process_performance_data=0
642
643
644
645# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS
646# These commands are run after every host and service check is
647# performed.  These commands are executed only if the
648# enable_performance_data option (above) is set to 1.  The command
649# argument is the short name of a command definition that you
650# define in your host configuration file.  Read the HTML docs for
651# more information on performance data.
652
653#host_perfdata_command=process-host-perfdata
654#service_perfdata_command=process-service-perfdata
655
656
657
658# HOST AND SERVICE PERFORMANCE DATA FILES
659# These files are used to store host and service performance data.
660# Performance data is only written to these files if the
661# enable_performance_data option (above) is set to 1.
662
663#host_perfdata_file=/tmp/host-perfdata
664#service_perfdata_file=/tmp/service-perfdata
665
666
667
668# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES
669# These options determine what data is written (and how) to the
670# performance data files.  The templates may contain macros, special
671# characters (\t for tab, \r for carriage return, \n for newline)
672# and plain text.  A newline is automatically added after each write
673# to the performance data file.  Some examples of what you can do are
674# shown below.
675
676#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$
677#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$
678
679
680
681
682# HOST AND SERVICE PERFORMANCE DATA FILE MODES
683# This option determines whether or not the host and service
684# performance data files are opened in write ("w") or append ("a")
685# mode.  Unless you are the files are named pipes, you will probably
686# want to use the default mode of append ("a").
687
688#host_perfdata_file_mode=a
689#service_perfdata_file_mode=a
690
691
692
693# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL
694# These options determine how often (in seconds) the host and service
695# performance data files are processed using the commands defined
696# below.  A value of 0 indicates the files should not be periodically
697# processed.
698
699#host_perfdata_file_processing_interval=0
700#service_perfdata_file_processing_interval=0
701
702
703
704# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS
705# These commands are used to periodically process the host and
706# service performance data files.  The interval at which the
707# processing occurs is determined by the options above.
708
709#host_perfdata_file_processing_command=process-host-perfdata-file
710#service_perfdata_file_processing_command=process-service-perfdata-file
711
712
713
714# OBSESS OVER SERVICE CHECKS OPTION
715# This determines whether or not Nagios will obsess over service
716# checks and run the ocsp_command defined below.  Unless you're
717# planning on implementing distributed monitoring, do not enable
718# this option.  Read the HTML docs for more information on
719# implementing distributed monitoring.
720# Values: 1 = obsess over services, 0 = do not obsess (default)
721
722obsess_over_services=0
723
724
725
726# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
727# This is the command that is run for every service check that is
728# processed by Nagios.  This command is executed only if the
729# obsess_over_service option (above) is set to 1.  The command
730# argument is the short name of a command definition that you
731# define in your host configuration file. Read the HTML docs for
732# more information on implementing distributed monitoring.
733
734#ocsp_command=somecommand
735
736
737
738# ORPHANED SERVICE CHECK OPTION
739# This determines whether or not Nagios will periodically
740# check for orphaned services.  Since service checks are not
741# rescheduled until the results of their previous execution
742# instance are processed, there exists a possibility that some
743# checks may never get rescheduled.  This seems to be a rare
744# problem and should not happen under normal circumstances.
745# If you have problems with service checks never getting
746# rescheduled, you might want to try enabling this option.
747# Values: 1 = enable checks, 0 = disable checks
748
749check_for_orphaned_services=0
750
751
752
753# SERVICE FRESHNESS CHECK OPTION
754# This option determines whether or not Nagios will periodically
755# check the "freshness" of service results.  Enabling this option
756# is useful for ensuring passive checks are received in a timely
757# manner.
758# Values: 1 = enabled freshness checking, 0 = disable freshness checking
759
760check_service_freshness=1
761
762
763
764# SERVICE FRESHNESS CHECK INTERVAL
765# This setting determines how often (in seconds) Nagios will
766# check the "freshness" of service check results.  If you have
767# disabled service freshness checking, this option has no effect.
768
769service_freshness_check_interval=60
770
771
772
773# HOST FRESHNESS CHECK OPTION
774# This option determines whether or not Nagios will periodically
775# check the "freshness" of host results.  Enabling this option
776# is useful for ensuring passive checks are received in a timely
777# manner.
778# Values: 1 = enabled freshness checking, 0 = disable freshness checking
779
780check_host_freshness=0
781
782
783
784# HOST FRESHNESS CHECK INTERVAL
785# This setting determines how often (in seconds) Nagios will
786# check the "freshness" of host check results.  If you have
787# disabled host freshness checking, this option has no effect.
788
789host_freshness_check_interval=60
790
791
792
793# AGGREGATED STATUS UPDATES
794# This option determines whether or not Nagios will
795# aggregate updates of host, service, and program status
796# data.  Normally, status data is updated immediately when
797# a change occurs.  This can result in high CPU loads if
798# you are monitoring a lot of services.  If you want Nagios
799# to only refresh status data every few seconds, disable
800# this option.
801# Values: 1 = enable aggregate updates, 0 = disable aggregate updates
802
803aggregate_status_updates=1
804
805
806
807# AGGREGATED STATUS UPDATE INTERVAL
808# Combined with the aggregate_status_updates option,
809# this option determines the frequency (in seconds!) that
810# Nagios will periodically dump program, host, and
811# service status data.  If you are not using aggregated
812# status data updates, this option has no effect.
813
814status_update_interval=15
815
816
817
818# FLAP DETECTION OPTION
819# This option determines whether or not Nagios will try
820# and detect hosts and services that are "flapping". 
821# Flapping occurs when a host or service changes between
822# states too frequently.  When Nagios detects that a
823# host or service is flapping, it will temporarily suppress
824# notifications for that host/service until it stops
825# flapping.  Flap detection is very experimental, so read
826# the HTML documentation before enabling this feature!
827# Values: 1 = enable flap detection
828#         0 = disable flap detection (default)
829
830enable_flap_detection=0
831
832
833
834# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
835# Read the HTML documentation on flap detection for
836# an explanation of what this option does.  This option
837# has no effect if flap detection is disabled.
838
839low_service_flap_threshold=5.0
840high_service_flap_threshold=20.0
841low_host_flap_threshold=5.0
842high_host_flap_threshold=20.0
843
844
845
846# DATE FORMAT OPTION
847# This option determines how short dates are displayed. Valid options
848# include:
849#       us              (MM-DD-YYYY HH:MM:SS)
850#       euro            (DD-MM-YYYY HH:MM:SS)
851#       iso8601         (YYYY-MM-DD HH:MM:SS)
852#       strict-iso8601  (YYYY-MM-DDTHH:MM:SS)
853#
854
855date_format=us
856
857
858
859# P1.PL FILE LOCATION
860# This value determines where the p1.pl perl script (used by the
861# embedded Perl interpreter) is located.  If you didn't compile
862# Nagios with embedded Perl support, this option has no effect.
863
864p1_file=/usr/lib/nagios2/p1.pl
865
866
867
868# ILLEGAL OBJECT NAME CHARACTERS
869# This option allows you to specify illegal characters that cannot
870# be used in host names, service descriptions, or names of other
871# object types.
872
873illegal_object_name_chars=`~!$%^&*|'"<>?,()=
874
875
876
877# ILLEGAL MACRO OUTPUT CHARACTERS
878# This option allows you to specify illegal characters that are
879# stripped from macros before being used in notifications, event
880# handlers, etc.  This DOES NOT affect macros used in service or
881# host check commands.
882# The following macros are stripped of the characters you specify:
883#       $HOSTOUTPUT$
884#       $HOSTPERFDATA$
885#       $HOSTACKAUTHOR$
886#       $HOSTACKCOMMENT$
887#       $SERVICEOUTPUT$
888#       $SERVICEPERFDATA$
889#       $SERVICEACKAUTHOR$
890#       $SERVICEACKCOMMENT$
891
892illegal_macro_output_chars=`~$&|'"<>
893
894
895
896# REGULAR EXPRESSION MATCHING
897# This option controls whether or not regular expression matching
898# takes place in the object config files.  Regular expression
899# matching is used to match host, hostgroup, service, and service
900# group names/descriptions in some fields of various object types.
901# Values: 1 = enable regexp matching, 0 = disable regexp matching
902
903use_regexp_matching=0
904
905
906
907# "TRUE" REGULAR EXPRESSION MATCHING
908# This option controls whether or not "true" regular expression
909# matching takes place in the object config files.  This option
910# only has an effect if regular expression matching is enabled
911# (see above).  If this option is DISABLED, regular expression
912# matching only occurs if a string contains wildcard characters
913# (* and ?).  If the option is ENABLED, regexp matching occurs
914# all the time (which can be annoying).
915# Values: 1 = enable true matching, 0 = disable true matching
916
917use_true_regexp_matching=0
918
919
920
921
922# ADMINISTRATOR EMAIL ADDRESS
923# The email address of the administrator of *this* machine (the one
924# doing the monitoring).  Nagios never uses this value itself, but
925# you can access this value by using the $ADMINEMAIL$ macro in your
926# notification commands.
927
928admin_email=nagios
929
930
931
932# ADMINISTRATOR PAGER NUMBER/ADDRESS
933# The pager number/address for the administrator of *this* machine.
934# Nagios never uses this value itself, but you can access this
935# value by using the $ADMINPAGER$ macro in your notification
936# commands.
937
938admin_pager=pagenagios
939
940
941
942# DAEMON CORE DUMP OPTION
943# This option determines whether or not Nagios is allowed to create
944# a core dump when it runs as a daemon.  Note that it is generally
945# considered bad form to allow this, but it may be useful for
946# debugging purposes.
947# Values: 1 - Allow core dumps
948#         0 - Do not allow core dumps (default)
949
950daemon_dumps_core=0
951
952
953#process_performance_data=1
954#service_perfdata_file=/home/noc/ng/log/perfdata
955#service_perfdata_file_template=$LASTSERVICECHECK$||$HOSTNAME$||$SERVICEDESC$||$SERVICEOUTPUT$||$SERVICEPERFDATA$
956#service_perfdata_file_mode=a
957#service_perfdata_file_processing_interval=60
958#service_perfdata_file_processing_command=ng-service-perfdata
959# EOF (End of file)
Note: See TracBrowser for help on using the repository browser.