[1058] | 1 | # This document is a how-to for installing a Fedora scripts.mit.edu server. |
---|
[1668] | 2 | # It is semi-vaguely in the form of a shell script, but is not really |
---|
| 3 | # runnable as it stands. |
---|
[181] | 4 | |
---|
[1063] | 5 | set -e -x |
---|
| 6 | |
---|
[1661] | 7 | # Some commands should be run as the scripts-build user, not root. |
---|
| 8 | |
---|
| 9 | alias asbuild="sudo -u scripts-build" |
---|
| 10 | |
---|
| 11 | # Old versions of this install document advised setting |
---|
| 12 | # NSS_NONLOCAL_IGNORE=1 anytime you're setting up anything, e.g. using |
---|
| 13 | # yum, warning that useradd will query LDAP in a stupid way that makes |
---|
| 14 | # it hang forever. As of Fedora 13, this does not seem to be a problem, |
---|
| 15 | # so it's been removed from the instructions. If an install is hanging, |
---|
| 16 | # though, try adding NSS_NONLOCAL_IGNORE. |
---|
| 17 | |
---|
| 18 | # This is actually just "pick an active scripts server". It can't be |
---|
| 19 | # scripts.mit.edu because our networking config points that domain |
---|
| 20 | # at localhost, and if our server is not setup at that point things |
---|
| 21 | # will break. |
---|
[1620] | 22 | source_server="cats-whiskers.mit.edu" |
---|
[1063] | 23 | |
---|
[1668] | 24 | # 'branch' is the current svn branch you are on. You want to |
---|
[1619] | 25 | # use trunk if your just installing a new server, and branches/fcXX-dev |
---|
| 26 | # if your preparing a server on a new Fedora release. |
---|
[1668] | 27 | branch="trunk" |
---|
[1259] | 28 | |
---|
[1672] | 29 | # 'server' is the public hostname of your server, for SCP'ing files |
---|
| 30 | # to and from. |
---|
| 31 | server=YOUR-SERVER-NAME-HERE |
---|
| 32 | |
---|
[1668] | 33 | # Start with a Scripts kickstarted install of Fedora (install-fedora) |
---|
[1063] | 34 | |
---|
[1668] | 35 | # Take updates, reboot if there's a kernel update. |
---|
[1692] | 36 | yum update -y |
---|
[861] | 37 | |
---|
[1677] | 38 | # Get rid of network manager |
---|
| 39 | yum remove NetworkManager |
---|
| 40 | |
---|
[1661] | 41 | # Copy over root's dotfiles from one of the other machines. |
---|
| 42 | # Perhaps a useful change is to remove the default aliases |
---|
| 43 | cd /root |
---|
| 44 | ls -l .bashrc |
---|
| 45 | ls -l .ldapvirc |
---|
| 46 | ls -l .screenrc |
---|
| 47 | ls -l .ssh |
---|
| 48 | ls -l .vimrc |
---|
[1672] | 49 | ls -l .k5login |
---|
[1661] | 50 | # Trying to scp from server to server won't work, as scp |
---|
| 51 | # will attempt to negotiate a server-to-server connection. |
---|
| 52 | # Instead, scp to your trusted machine as a temporary file, |
---|
| 53 | # and then push to the other server |
---|
[1672] | 54 | scp -r root@$source_server:~/{.bashrc,.ldapvirc,.screenrc,.ssh,.vimrc,.k5login} . |
---|
| 55 | scp -r {.bashrc,.ldapvirc,.screenrc,.ssh,.vimrc,.k5login} root@$server:~ |
---|
[1661] | 56 | |
---|
[1672] | 57 | # Install the initial set of credentials (to get Kerberized logins once |
---|
| 58 | # krb5 is installed). Otherwise, SCP'ing things in will be annoying. |
---|
| 59 | # o You probably installed the machine keytab long ago |
---|
| 60 | ls -l /etc/krb5.keytab |
---|
| 61 | # Use ktutil to combine the host/scripts.mit.edu and |
---|
| 62 | # host/scripts-vhosts.mit.edu keys with host/this-server.mit.edu in |
---|
| 63 | # the keytab. Do not use 'k5srvutil change' on the combined keytab |
---|
| 64 | # or you'll break the other servers. (real servers only). Be |
---|
| 65 | # careful about writing out the keytab: if you write it to an |
---|
| 66 | # existing file the keys will just get appended. The correct |
---|
| 67 | # credential list should look like: |
---|
| 68 | # ktutil: l |
---|
| 69 | # slot KVNO Principal |
---|
| 70 | # ---- ---- --------------------------------------------------------------------- |
---|
| 71 | # 1 5 host/old-faithful.mit.edu@ATHENA.MIT.EDU |
---|
| 72 | # 2 3 host/scripts-vhosts.mit.edu@ATHENA.MIT.EDU |
---|
| 73 | # 3 2 host/scripts.mit.edu@ATHENA.MIT.EDU |
---|
| 74 | # o Replace the ssh host keys with the ones common to all scripts servers (real servers only) |
---|
| 75 | ls -l /etc/ssh/*key* |
---|
| 76 | # You can do that with: |
---|
| 77 | scp root@$source_server:/etc/ssh/*key* . |
---|
| 78 | scp *key* root@$server:/etc/ssh/ |
---|
| 79 | service sshd reload |
---|
| 80 | |
---|
[1063] | 81 | # Check out the scripts /etc configuration |
---|
[1672] | 82 | # backslash to make us not use the alias |
---|
[1063] | 83 | cd /root |
---|
| 84 | \cp -a etc / |
---|
[1677] | 85 | chmod 0440 /etc/sudoers |
---|
[785] | 86 | |
---|
[1381] | 87 | # NOTE: You will have just lost DNS resolution and the ability |
---|
| 88 | # to do password SSH in. If you managed to botch this step without |
---|
| 89 | # having named setup, you can do a quick fix by frobbing /etc/resolv.conf |
---|
| 90 | # with a non 127.0.0.1 address for the DNS server. Be sure to revert it once |
---|
| 91 | # you have named. |
---|
[1259] | 92 | |
---|
[1672] | 93 | # NOTE: You can get password SSH back by editing /etc/ssh/sshd_config (allow |
---|
[1619] | 94 | # password auth) and /etc/pam.d/sshd (comment out the first three auth |
---|
[1672] | 95 | # lines). However, you should have the Kerberos credentials in place |
---|
| 96 | # so as soon as you install the full set of Scripts packages, you'll get |
---|
| 97 | # Kerberized logins. |
---|
[1619] | 98 | |
---|
[1668] | 99 | # Make sure network is working. If this is a new server name, you'll |
---|
| 100 | # need to add it to /etc/hosts and |
---|
| 101 | # /etc/sysconfig/network-scripts/route-eth1. Kickstart should have |
---|
| 102 | # configured eth0 and eth1 correctly; use service network restart |
---|
| 103 | # to add the new routes in route-eth1. |
---|
[1672] | 104 | service network restart |
---|
[1668] | 105 | route |
---|
| 106 | ifconfig |
---|
| 107 | cat /etc/hosts |
---|
| 108 | cat /etc/sysconfig/network-scripts/route-eth1 |
---|
[1259] | 109 | |
---|
[1619] | 110 | # This is the point at which you should start updating scriptsified |
---|
| 111 | # packages for a new Fedora release. Consult 'upgrade-tips' for more |
---|
| 112 | # information. |
---|
[1661] | 113 | yum install -y scripts-base |
---|
[1672] | 114 | # Some of these packages are naughty and clobber some of our files |
---|
| 115 | cd /etc |
---|
| 116 | svn revert resolv.conf hosts sysconfig/openafs |
---|
[387] | 117 | |
---|
[1058] | 118 | # Replace rsyslog with syslog-ng by doing: |
---|
[1259] | 119 | rpm -e --nodeps rsyslog |
---|
[1661] | 120 | yum install -y syslog-ng |
---|
[1259] | 121 | chkconfig syslog-ng on |
---|
[861] | 122 | |
---|
[1661] | 123 | # Fix the openafs /usr/vice/etc <-> /etc/openafs mapping. |
---|
[1259] | 124 | echo "/afs:/usr/vice/cache:10000000" > /usr/vice/etc/cacheinfo |
---|
[1661] | 125 | echo "athena.mit.edu" > /usr/vice/etc/ThisCell |
---|
[788] | 126 | |
---|
[1661] | 127 | # [TEST SERVER] If you're installing a test server, this needs to be |
---|
| 128 | # much smaller; the max filesize on XVM is 10GB. Pick something like |
---|
| 129 | # 500000. Also, some of the AFS parameters are kind of retarded (and if |
---|
| 130 | # you're low on disk space, will actually exhaust our inodes). Edit |
---|
| 131 | # these parameters in /etc/sysconfig/openafs |
---|
| 132 | |
---|
[1645] | 133 | # Test that zephyr is working |
---|
| 134 | chkconfig zhm on |
---|
| 135 | service zhm start |
---|
| 136 | echo 'Test!' | zwrite -d -c scripts -i test |
---|
[861] | 137 | |
---|
[1058] | 138 | # Install the full list of RPMs that users expect to be on the |
---|
[1259] | 139 | # scripts.mit.edu servers. |
---|
| 140 | rpm -qa --queryformat "%{Name}.%{Arch}\n" | sort > packages.txt |
---|
| 141 | # arrange for packages.txt to be passed to the server, then run: |
---|
[1661] | 142 | # --skip-broken will (usually) prevent you from having to sit through |
---|
| 143 | # several minutes of dependency resolution until it decides that |
---|
| 144 | # it can't install /one/ package. |
---|
[1676] | 145 | yum install -y --skip-broken $(cat packages.txt) |
---|
[1259] | 146 | |
---|
[1692] | 147 | # Make sure sendmail isn't installed |
---|
| 148 | yum remove sendmail |
---|
| 149 | |
---|
[1190] | 150 | # Check which packages are installed on your new server that are not |
---|
| 151 | # in the snapshot, and remove ones that aren't needed for some reason |
---|
| 152 | # on the new machine. Otherwise, aside from bloat, you may end up |
---|
| 153 | # with undesirable things for security, like sendmail. |
---|
[1661] | 154 | rpm -qa --queryformat "%{Name}.%{Arch}\n" | grep -v kernel | sort > newpackages.txt |
---|
| 155 | diff -u packages.txt newpackages.txt | grep -v kernel | less |
---|
[1382] | 156 | # here's a cute script that removes all extra packages |
---|
[1676] | 157 | yum erase -y $(grep -Fxvf packages.txt newpackages.txt) |
---|
[1190] | 158 | |
---|
[1661] | 159 | # We need an upstream version of cgi which we've packaged ourselves, but |
---|
| 160 | # it doesn't work with the haskell-platform package which expects |
---|
| 161 | # explicit versions. So temporarily rpm -e the package, and then |
---|
| 162 | # install it again after you install haskell-platform. [Note: You |
---|
| 163 | # probably won't need this in Fedora 15 or something, when the Haskell |
---|
| 164 | # Platform gets updated.] |
---|
| 165 | rpm -e ghc-cgi-devel ghc-cgi |
---|
[1672] | 166 | yum install -y haskell-platform |
---|
[1661] | 167 | yumdownloader ghc-cgi |
---|
| 168 | yumdownloader ghc-cgi-devel |
---|
[1672] | 169 | rpm -i ghc-cgi*1.8.1*.rpm |
---|
[1661] | 170 | |
---|
[1237] | 171 | # Check out the scripts /usr/vice/etc configuration |
---|
[1672] | 172 | cd /root/vice |
---|
[1237] | 173 | \cp -a etc /usr/vice |
---|
| 174 | |
---|
[1058] | 175 | # Install the full list of perl modules that users expect to be on the |
---|
[1108] | 176 | # scripts.mit.edu servers. |
---|
[1672] | 177 | cd /root |
---|
[1259] | 178 | export PERL_MM_USE_DEFAULT=1 |
---|
[1661] | 179 | cpan # this is interactive, enter the next two lines |
---|
[1259] | 180 | o conf prerequisites_policy follow |
---|
| 181 | o conf commit |
---|
| 182 | # on a reference server |
---|
| 183 | perldoc -u perllocal | grep head2 | cut -f 3 -d '<' | cut -f 1 -d '|' | sort -u | perl -ne 'chomp; print "notest install $_\n" if system("rpm -q --whatprovides \"perl($_)\" >/dev/null 2>/dev/null")' > perl-packages.txt |
---|
| 184 | # arrange for perl-packages.txt to be transferred to server |
---|
| 185 | cat perl-packages.txt | perl -MCPAN -e shell |
---|
[812] | 186 | |
---|
[1058] | 187 | # Install the Python eggs and Ruby gems and PEAR/PECL doohickeys that are on |
---|
| 188 | # the other scripts.mit.edu servers and do not have RPMs. |
---|
[1259] | 189 | # The general mode of operation will be to run the "list" command |
---|
| 190 | # on both servers, see what the differences are, check if those diffs |
---|
| 191 | # are packaged up as rpms, and install them (rpm if possible, native otherwise) |
---|
[1178] | 192 | # - Look at /usr/lib/python2.6/site-packages and |
---|
| 193 | # /usr/lib64/python2.6/site-packages for Python eggs and modules. |
---|
[1259] | 194 | # There will be a lot of gunk that was installed from packages; |
---|
[1661] | 195 | # easy-install.pth in /usr/lib/ will tell you what was easy_installed. |
---|
[1178] | 196 | # First use 'yum search' to see if the relevant package is now available |
---|
| 197 | # as an RPM, and install that if it is. If not, then use easy_install. |
---|
[1432] | 198 | # Pass -Z to easy_install to install them unzipped, as some zipped eggs |
---|
| 199 | # want to be able to write to ~/.python-eggs. (Also makes sourcediving |
---|
| 200 | # easier.) |
---|
[1692] | 201 | cat /usr/lib/python2.6/site-packages/easy-install.pth | grep "^./" | cut -c3- | cut -f1 -d- . egg.txt |
---|
| 202 | cat egg.txt | xargs easy_install -Z |
---|
[1058] | 203 | # - Look at `gem list` for Ruby gems. |
---|
[1178] | 204 | # Again, use 'yum search' and prefer RPMs, but failing that, 'gem install'. |
---|
[1259] | 205 | # ezyang: rspec-rails depends on rspec, and will override the Yum |
---|
| 206 | # package, so... don't use that RPM yet |
---|
[1672] | 207 | gem list --no-version > gem.txt |
---|
[1676] | 208 | gem install $(gem list --no-version | grep -Fxvf - gem.txt) |
---|
[1058] | 209 | # - Look at `pear list` for Pear fruits (or whatever they're called). |
---|
[1178] | 210 | # Yet again, 'yum search' for RPMs before resorting to 'pear install'. Note |
---|
| 211 | # that for things in the beta repo, you'll need 'pear install package-beta'. |
---|
[1259] | 212 | # (you might get complaints about the php_scripts module; ignore them) |
---|
[1672] | 213 | pear list | tail -n +4 | cut -f 1 -d " " > pear.txt |
---|
| 214 | pear config-set preferred_state beta |
---|
| 215 | pear channel-update pear.php.net |
---|
[1676] | 216 | pear install $(pear list | tail -n +4 | cut -f 1 -d " " | grep -Fxvf - pear.txt) |
---|
[1190] | 217 | # - Look at `pecl list` for PECL things. 'yum search', and if you must, |
---|
[1462] | 218 | # 'pecl install' needed items. If it doesn't work, try 'pear install |
---|
[1544] | 219 | # pecl/foo' or 'pecl install foo-beta' or those two combined. |
---|
[1672] | 220 | pecl list | tail -n +4 | cut -f 1 -d " " > pecl.txt |
---|
[1676] | 221 | pecl install --nodeps $(pecl list | tail -n +4 | cut -f 1 -d " " | grep -Fxvf - pecl.txt) |
---|
[785] | 222 | |
---|
[1259] | 223 | # Setup some Python config |
---|
| 224 | echo 'import site, os.path; site.addsitedir(os.path.expanduser("~/lib/python2.6/site-packages"))' > /usr/lib/python2.6/site-packages/00scripts-home.pth |
---|
[812] | 225 | |
---|
[1645] | 226 | # Install the credentials. There are a lot of things to remember here. |
---|
| 227 | # Be sure to make sure the permissions match up (ls -l on an existing |
---|
| 228 | # server!). |
---|
[1672] | 229 | scp root@$source_server:{/etc/{sql-mit-edu.cfg.php,daemon.keytab,pki/tls/private/scripts.key,signup-ldap-pw,whoisd-password},/home/logview/.k5login} . |
---|
| 230 | scp daemon.keytab signup-ldap-pw whoisd-password sql-mit-edu.cfg.php root@$server:/etc |
---|
| 231 | scp scripts.key root@$server:/etc/pki/tls/private |
---|
| 232 | scp .k5login root@$server:/home/logview |
---|
| 233 | chown afsagent:afsagent /etc/daemon.keytab |
---|
| 234 | # o The daemon.scripts keytab (will be daemon.scripts-test for test) |
---|
[1259] | 235 | ls -l /etc/daemon.keytab |
---|
| 236 | # o The SSL cert private key (real servers only) |
---|
[1645] | 237 | ls -l /etc/pki/tls/private/scripts.key |
---|
[1259] | 238 | # o The LDAP password for the signup process (real servers only) |
---|
[1645] | 239 | ls -l /etc/signup-ldap-pw |
---|
[1320] | 240 | # o The whoisd password (real servers only) |
---|
[1661] | 241 | ls -l /etc/whoisd-password |
---|
[1259] | 242 | # o Make sure logview's .k5login is correct (real servers only) |
---|
[1645] | 243 | cat /home/logview/.k5login |
---|
[387] | 244 | |
---|
[1672] | 245 | # Spin up OpenAFS. This will fail if there's been a new kernel since |
---|
| 246 | # when you last tried. In that case, you can hold on till later to |
---|
| 247 | # start OpenAFS. This will take a little bit of time; |
---|
| 248 | service openafs-client start |
---|
| 249 | |
---|
| 250 | # Check that fs sysname is correct. You should see, among others, |
---|
| 251 | # 'amd64_fedoraX_scripts' (vary X) and 'scripts'. If it's not, you |
---|
| 252 | # probably did a distro upgrade and should update /etc/sysconfig/openafs. |
---|
| 253 | fs sysname |
---|
| 254 | |
---|
[1661] | 255 | # [TEST SERVER] If you are setting up a test server, pay attention to |
---|
[1058] | 256 | # /etc/sysconfig/network-scripts and do not bind scripts' IP address. |
---|
[1259] | 257 | # You will also need to modify: |
---|
| 258 | # o /etc/ldap.conf |
---|
| 259 | # add: host scripts.mit.edu |
---|
| 260 | # o /etc/nss-ldapd.conf |
---|
| 261 | # replace: uri ***** |
---|
| 262 | # with: uri ldap://scripts.mit.edu/ |
---|
| 263 | # o /etc/openldap/ldap.conf |
---|
| 264 | # add: URI ldap://scripts.mit.edu/ |
---|
| 265 | # BASE dc=scripts,dc=mit,dc=edu |
---|
| 266 | # o /etc/httpd/conf.d/vhost_ldap.conf |
---|
| 267 | # replace: VhostLDAPUrl **** |
---|
| 268 | # with: VhostLDAPUrl "ldap://scripts.mit.edu/ou=VirtualHosts,dc=scripts,dc=mit,dc=edu" |
---|
[1450] | 269 | # o /etc/postfix/virtual-alias-{domains,maps}-ldap.cf |
---|
| 270 | # replace: server_host ***** |
---|
| 271 | # with: server_host = ldap://scripts.mit.edu |
---|
[1259] | 272 | # to use scripts.mit.edu instead of localhost. |
---|
| 273 | # XXX: someone should write sed scripts to do this |
---|
[562] | 274 | |
---|
[1661] | 275 | # [TEST SERVER] If you are setting up a test server, afsagent's cronjob |
---|
| 276 | # will attempt to be renewing with the wrong credentials |
---|
| 277 | # (daemon.scripts). Change this: |
---|
[1259] | 278 | vim /home/afsagent/renew # replace all mentions of daemon.scripts.mit.edu |
---|
| 279 | |
---|
[1668] | 280 | # Set up replication (see ./install-ldap). |
---|
[1672] | 281 | # You'll need the LDAP keytab for this server: be sure to chown it |
---|
| 282 | # fedora-ds after you create the fedora-ds user |
---|
| 283 | ls -l /etc/dirsrv/keytab |
---|
[1668] | 284 | cat install-ldap |
---|
[785] | 285 | |
---|
[1058] | 286 | # Make the services dirsrv, nslcd, nscd, postfix, and httpd start at |
---|
| 287 | # boot. Run chkconfig to make sure the set of services to be run is |
---|
| 288 | # correct. |
---|
[1681] | 289 | service nslcd start |
---|
| 290 | service nscd start |
---|
| 291 | service postfix start |
---|
| 292 | service httpd start |
---|
[1259] | 293 | chkconfig dirsrv on |
---|
| 294 | chkconfig nslcd on |
---|
| 295 | chkconfig nscd on |
---|
| 296 | chkconfig postfix on |
---|
| 297 | chkconfig httpd on |
---|
[818] | 298 | |
---|
[1690] | 299 | # nrpe is required for nagios alerts |
---|
| 300 | chkconfig nrpe on |
---|
| 301 | |
---|
[1672] | 302 | # Check sql user credentials (needs to be done after LDAP is setup) |
---|
| 303 | chown sql /etc/sql-mit-edu.cfg.php |
---|
| 304 | |
---|
[1259] | 305 | # Postfix doesn't actually deliver mail; fix this |
---|
| 306 | cd /etc/postfix |
---|
| 307 | postmap virtual |
---|
[1178] | 308 | |
---|
[1451] | 309 | # Munin might not be monitoring packages that were installed after it |
---|
| 310 | munin-node-configure --suggest --shell | sh |
---|
| 311 | |
---|
[1058] | 312 | # Run fmtutil-sys --all, which does something that makes TeX work. |
---|
[1661] | 313 | # (Note: this errors on XeTeX which is ok.) |
---|
[1259] | 314 | fmtutil-sys --all |
---|
[803] | 315 | |
---|
[1058] | 316 | # Ensure that PHP isn't broken: |
---|
[1259] | 317 | mkdir /tmp/sessions |
---|
| 318 | chmod 01777 /tmp/sessions |
---|
[954] | 319 | |
---|
[1661] | 320 | # Ensure fcgid isn't broken (should be 755) |
---|
[1678] | 321 | ls -ld /var/run/mod_fcgid |
---|
[1259] | 322 | |
---|
| 323 | # Fix etc by making sure none of our config files got overwritten |
---|
| 324 | cd /etc |
---|
[1661] | 325 | svn status -q |
---|
| 326 | # Some usual candidates for clobbering include nsswitch.conf and |
---|
| 327 | # sysconfig/openafs |
---|
[1259] | 328 | |
---|
[1382] | 329 | # ThisCell got clobbered, replace it with athena.mit.edu |
---|
| 330 | echo "athena.mit.edu" > /usr/vice/etc/ThisCell |
---|
| 331 | |
---|
[1058] | 332 | # Reboot the machine to restore a consistent state, in case you |
---|
[1661] | 333 | # changed anything. (Note: Starting kdump fails (this is ok)) |
---|
[875] | 334 | |
---|
[1661] | 335 | # [OPTIONAL] Your machine's hostname is baked in at install time; |
---|
| 336 | # in the rare case you need to change it: it appears to be in: |
---|
[1259] | 337 | # o /etc/sysconfig/network |
---|
| 338 | # o your lvm thingies; probably don't need to edit |
---|
[1382] | 339 | |
---|
[1661] | 340 | # [TEST SERVER] More stuff for test servers |
---|
[1382] | 341 | # - You need a self-signed SSL cert. Generate with: |
---|
| 342 | openssl req -new -x509 -keyout /etc/pki/tls/private/scripts.key -out /etc/pki/tls/certs/scripts.cert -nodes |
---|
| 343 | # Also make /etc/pki/tls/certs/ca.pem match up |
---|
| 344 | # - Make (/etc/aliases) root mail go to /dev/null, so we don't spam people |
---|
| 345 | # - Edit /etc/httpd/conf.d/scripts-vhost-names.conf to have scripts-fX-test.xvm.mit.edu |
---|
| 346 | # be an accepted vhost name |
---|
| 347 | # - Look at the old test server and see what config changes are floating around |
---|
[1620] | 348 | |
---|
| 349 | # XXX: our SVN checkout should be updated to use scripts.mit.edu |
---|
[1645] | 350 | # (repository and etc) once serving actually works. |
---|
[1661] | 351 | cd /etc |
---|
| 352 | svn switch --relocate svn://$source_server/ svn://scripts.mit.edu/ |
---|
| 353 | cd /usr/vice/etc |
---|
| 354 | svn switch --relocate svn://$source_server/ svn://scripts.mit.edu/ |
---|
| 355 | cd /srv/repository |
---|
| 356 | asbuild svn switch --relocate svn://$source_server/ svn://scripts.mit.edu/ |
---|
| 357 | asbuild svn up # verify scripts.mit.edu works |
---|