# This document is a how-to for installing a Fedora scripts.mit.edu server. set -e -x [ -e /scripts-boot-count ] || echo 0 > /scripts-boot-count source_server="old-faithful.mit.edu" boot=${1:$(cat /scripts-boot-count)} branch=branches/fc11-dev doreboot() { echo $(( $boot + 1 )) > /scripts-boot-count; shutdown -r now "Rebooting for step $(cat /scripts-boot-count)" } YUM() { NSS_NONLOCAL_IGNORE=1 yum "$@" } # Helper files for the install are located in server/fedora/config. # Start with a normal install of Fedora. if [ $boot = 0 ]; then # When the initial configuration screen comes up, under "Firewall # configuration", disable the firewall, and under "System services", leave # enabled (as of Fedora 9) acpid, anacron, atd, cpuspeed, crond, # firstboot, fuse, haldaemon, ip6tables, iptables, irqbalance, # kerneloops, mdmonitor, messagebus, microcode_ctl, netfs, network, nscd, ntpd, # sshd, udev-post, and nothing else. echo "--disabled" > /etc/sysconfig/system-config-firewall for i in NetworkManager avahi-daemon bluetooth cups isdn nfslock pcscd restorecond rpcbind rpcgssd rpcidmapd sendmail; do chkconfig "$i" off done # Edit /etc/selinux/config so it has SELINUX=disabled and reboot. sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config doreboot fi if [ $boot = 1 ]; then # Create a scripts-build user account, and set up rpm to build in # $HOME by doing a # cp config/home/scripts-build/.rpmmacros /home/scripts-build/ # (If you just use the default setup, it will generate packages # in /usr/src/redhat.) adduser scripts-build # Check out the scripts.mit.edu svn repository. Configure svn not to cache # credentials. YUM install -y subversion cd /srv svn co svn://$source_server/$branch repository sed -i 's/^(# *)*store-passwords.*/store-passwords = no/' /root/.subversion/config sed -i 's/^(# *)*store-auth-creds.*/store-auth-creds = no/' /root/.subversion/config chown -R scripts-build /srv/repository # cd to server/fedora in the svn repository. cd /srv/repository/server/fedora # Run "make install-deps" to install various prereqs. Nonstandard # deps are in /mit/scripts/rpm. YUM install -y make make install-deps # Install bind YUM install -y bind # Check out the scripts /etc configuration cd /root svn co svn://scripts.mit.edu/$branch/server/fedora/config/etc etc # backslash to make us not use the alias \cp -a etc / # NOTE: You will have just lost DNS resolution and the abilit # to do password SSH in service named start chkconfig named on # XXX: This sometimes doesn't exist, but it really sucks if it # does exist. So check for it. # yum remove nss_ldap, because nss-ldapd conflicts with it # In the case of the Kerberos libraries, you'll be told that # there are conflicting files with the 64-bit versions of the packages, # which we scriptsify. You'll have to use --force to install those # rpms despite the conflicts. After doing that, you may want to # install the corresponding 64-bit scriptsified versions again, just # to be safe in case the 32-bit versions overwrite files that differ. # When you try this, it will complain that you already have the same # version installed; again, you'll need to use --force to do it anyway. # We need yumdownloader to force some RPMs # XXX: This might be wrong. Sanity check what packages ou # have when done YUM install -y yum-utils yumdownloader krb5-libs # XXX: These version numbers are hardcoded, need some cli-fu to generalize rpm -i krb5-libs-1.6.3-20.fc11.i586.rpm rpm -U --force krb5-libs-1.6.3-20.fc11.scripts.1138.x86_64.rpm # env NSS_NONLOCAL_IGNORE=1 yum install scripts-base YUM install -y scripts-base # Install mit-zephyr YUM install -y mit-zephyr # Remember to set NSS_NONLOCAL_IGNORE=1 anytime you're setting up # anything, e.g. using yum. Otherwise useradd will query LDAP in a stupid way # that makes it hang forever. (This is why we're using YUM, not yum) # Reload the iptables config to take down the restrictive firewall service iptables restart # Copy over root's dotfiles from one of the other machines. # Perhaps a useful change is to remove the default aliases # Replace rsyslog with syslog-ng by doing: rpm -e --nodeps rsyslog YUM install -y syslog-ng chkconfig syslog-ng on # Install various dependencies of the scripts system, including # glibc-devel.i586 (ezyang: already installed for me), # python-twisted-core (ditto), mod_fcgid, nrpe, nagios-plugins-all. YUM install -y mod_fcgid YUM install -y nrpe YUM install -y nagios-plugins-all # Disable NetworkManager with chkconfig NetworkManager off. Configure # networking on the front end and back end, and the routing table to send # traffic over the back end. Make sure that chkconfig reports "network" on, so # that the network will still be configured at next boot. # ezyang: For me, NetworkManager was not installed at this point, and # we had already done the basic config for networking front end and # back end (because I wanted ssh access, and not just conserver access) # Fix the openafs /usr/vice/etc <-> /etc/openafs mapping by changing # /usr/vice/etc/cacheinfo to contain: # /afs:/usr/vice/cache:10000000 # Also fix ThisCell to contain athena.mit.edu in both directories echo "/afs:/usr/vice/cache:10000000" > /usr/vice/etc/cacheinfo # ezyang: ThisCell on b-k and c-w don't have anything special # written here # Figure out why Zephyr isn't working. Most recently, it was because there # was a 64-bit RPM installed; remove it and install Joe's 32-bit one YUM erase -y mit-zephyr # mit-zephyr has a spurious dependency on mit-krb-config yumdownloader mit-zephyr.i386 # if deps change, this breaks YUM install -y libXaw.i586 libXext.i586 libXmu.i586 ncurses-libs.i586 readline.i58 rpm -i --nodeps mit-zephyr-2.1-6-linux.i386.rpm # Install the athena-base, athena-lprng, and athena-lprng-misc RPMs # from the Athena 9 build (these are present in our yum repo). Note # that you will have to use --nodeps for at least one of the lprng # ones because it thinks it needs the Athena hesiod RPM. It doesn't # really. Before doing this, run it without --nodeps and arrange to # install the rest of the things it really does depend on. This will # include a bunch of 32-bit rpms; go ahead and install the .i586 versions # of them. YUM install -y athena-base YUM install -y athena-lprng yumdownloader athena-lprng-misc # ezyang: I couldn't find any deps for this that existed in the repos # You might get a "find: `/usr/athena/info': No such file or directory" # error; this is fine rpm -i --nodeps athena-lprng-misc-9.4-0.i386.rpm # Install the full list of RPMs that users expect to be on the # scripts.mit.edu servers. # ezyang: Running the below I got file conflicts. To fix (since I had # botched steps above), I manually compared package lists and installed # them. If you've done the krb5 setup originally correctly, then # write down what you had to do here. yumdownloader krb5-devel rpm -i --force krb5-devel-1.6.3-20.fc11.i586.rpm rpm -U --force krb5-devel-1.6.3-20.fc11.scripts.1138.x86_64.rpm yumdownloader krb5-server rpm -i --force krb5-server-1.6.3-20.fc11.scripts.1138.x86_64.rpm # on another server, run: rpm -qa --queryformat "%{Name}.%{Arch}\n" | sort > packages.txt # arrange for packages.txt to be passed to the server, then run: # notice that yum is not capitalized # Also notice skip-broken NSS_NONLOCAL_IGNORE=1 cat packages.txt | xargs yum install -y --skip-broken # Check which packages are installed on your new server that are not # in the snapshot, and remove ones that aren't needed for some reason # on the new machine. Otherwise, aside from bloat, you may end up # with undesirable things for security, like sendmail. rpm -qa --queryformat "%{Name}.%{Arch}\n" | sort > newpackages.txt diff -u packages.txt newpackages.txt | less # if all went well, you'll probably see multiple kernel versions # as the only diff # ezyang: I got exim installed as another package # Install the full list of perl modules that users expect to be on the # scripts.mit.edu servers. # - export PERL_MM_USE_DEFAULT=1 # - Run 'cpan', accept the default configuration, and do 'o conf # prerequisites_policy follow'. # - Parse the output of perldoc -u perllocal | grep head2 on an existing # server, and "notest install" them from the cpan prompt. # TO DO THIS: # On another server, run: # perldoc -u perllocal | grep head2 | cut -f 3 -d '<' | cut -f 1 -d '|' | sort -u | perl -ne 'chomp; print "notest install $_\n" if system("rpm -q --whatprovides \"perl($_)\" >/dev/null 2>/dev/null")' > /mit/scripts/config/perl-packages.txt # Then on the server you're installing, # cat perl-packages.txt | perl -MCPAN -e shell export PERL_MM_USE_DEFAULT=1 # XXX: Some interactive gobbeldygook cpan o conf prerequisites_policy follow o conf commit # on a reference server perldoc -u perllocal | grep head2 | cut -f 3 -d '<' | cut -f 1 -d '|' | sort -u | perl -ne 'chomp; print "notest install $_\n" if system("rpm -q --whatprovides \"perl($_)\" >/dev/null 2>/dev/null")' > perl-packages.txt # arrange for perl-packages.txt to be transferred to server cat perl-packages.txt | perl -MCPAN -e shell # Install the Python eggs and Ruby gems and PEAR/PECL doohickeys that are on # the other scripts.mit.edu servers and do not have RPMs. # The general mode of operation will be to run the "list" command # on both servers, see what the differences are, check if those diffs # are packaged up as rpms, and install them (rpm if possible, native otherwise) # - Look at /usr/lib/python2.6/site-packages and # /usr/lib64/python2.6/site-packages for Python eggs and modules. # There will be a lot of gunk that was installed from packages; # easy-install.pth will tell you what was easy_installed. # First use 'yum search' to see if the relevant package is now available # as an RPM, and install that if it is. If not, then use easy_install. # - Look at `gem list` for Ruby gems. # Again, use 'yum search' and prefer RPMs, but failing that, 'gem install'. # ezyang: rspec-rails depends on rspec, and will override the Yum # package, so... don't use that RPM yet # - Look at `pear list` for Pear fruits (or whatever they're called). # Yet again, 'yum search' for RPMs before resorting to 'pear install'. Note # that for things in the beta repo, you'll need 'pear install package-beta'. # (you might get complaints about the php_scripts module; ignore them) # - Look at `pecl list` for PECL things. 'yum search', and if you must, # 'pecl install' needed items. # Automating this... will require a lot of batonning between # the servers. Probably best way to do it is to write an actual # script. # Setup some Python config echo 'import site, os.path; site.addsitedir(os.path.expanduser("~/lib/python2.6/site-packages"))' > /usr/lib/python2.6/site-packages/00scripts-home.pth # Build and install the scripts php module that enhances error logging info # XXX This thing really ought to be packaged cp -r /srv/repository/server/common/oursrc/php_scripts /root cd /root/php_scripts ./build.sh cp test/modules/scripts.so /usr/lib64/php/modules # Install the credentials. There are a lot of things to remember here: # o This will be different if you're setting up our build/update server. # o You probably installed the machine keytab long ago ls -l /etc/krb5.keytab # o Use ktutil to combine the host/scripts.mit.edu and # host/scripts-vhosts.mit.edu keys with host/this-server.mit.edu in # the keytab. Do not use 'k5srvutil change' on the combined keytab # or you'll break the other servers. (real servers only) # o The daemon.scripts keytab ls -l /etc/daemon.keytab # o The SSL cert private key (real servers only) # o The LDAP password for the signup process (real servers only) # o The SQL password for the signup process (real servers only) # o The LDAP keytab for this server, which will be used later (real servers only) # o Replace the ssh host keys with the ones common to all scripts servers (real servers only) # o You'll install an LDAP certificate signed by the scripts CA later (real servers only) # o Make sure root's .k5login is correct cat /root/.k5login # o Make sure logview's .k5login is correct (real servers only) # If you are setting up a test server, pay attention to # /etc/sysconfig/network-scripts and do not bind scripts' IP address. # You will also need to modify: # o /etc/ldap.conf # add: host scripts.mit.edu # o /etc/nss-ldapd.conf # replace: uri ***** # with: uri ldap://scripts.mit.edu/ # o /etc/openldap/ldap.conf # add: URI ldap://scripts.mit.edu/ # BASE dc=scripts,dc=mit,dc=edu # o /etc/httpd/conf.d/vhost_ldap.conf # replace: VhostLDAPUrl **** # with: VhostLDAPUrl "ldap://18.181.0.46/ou=VirtualHosts,dc=scripts,dc=mit,dc=edu" # to use scripts.mit.edu instead of localhost. # XXX: someone should write sed scripts to do this # If you are setting up a test server, afsagent's cronjob will attempt # to be renewing with the wrong credentials (daemon.scripts). Change this: vim /home/afsagent/renew # replace all mentions of daemon.scripts.mit.edu # Install fedora-ds-base and set up replication (see ./HOWTO-SETUP-LDAP # and ./fedora-ds-enable-ssl-and-kerberos.diff). # Make the services dirsrv, nslcd, nscd, postfix, and httpd start at # boot. Run chkconfig to make sure the set of services to be run is # correct. chkconfig dirsrv on chkconfig nslcd on chkconfig nscd on chkconfig postfix on chkconfig httpd on # Postfix doesn't actually deliver mail; fix this cd /etc/postfix postmap virtual # Run fmtutil-sys --all, which does something that makes TeX work. fmtutil-sys --all # ezyang: I got errors on xetex # Ensure that PHP isn't broken: mkdir /tmp/sessions chmod 01777 /tmp/sessions # Ensure that fcgid isn't broken: chmod 755 /var/run/httpd chmod 755 /var/run/httpd/mod_fcgid # ezyang: The latter didn't exist for me # Fix etc by making sure none of our config files got overwritten cd /etc svn status | grep M # ezyang: I had to revert krb5.conf, nsswitch.conf and sysconfig/openafs # Reboot the machine to restore a consistent state, in case you # changed anything. # ezyang: When I rebooted, the following things happened: # o Starting kdump failed (this is ok) # o postfix mailbombed us # o firstboot configuration screen popped up (ignored; manually will do # chkconfig after the fact) # (Optional) Beat your head against a wall. # Possibly perform other steps that I've neglected to put in this # document. # o In the first install of not-backward, ThisCell got clobbered, resulting # in trying to get tickets from openafs.org. Not sure when it got # clobbered -- ezyang # o For some reason, syslog-ng wasn't turning on automatically, so we weren't # getting spew # Some info about changing hostnames: it appears to be in: # o /etc/sysconfig/network # o your lvm thingies; probably don't need to edit