X-Git-Url: https://scripts.mit.edu/gitweb/www/ikiwiki.git/blobdiff_plain/9943e270f8646fe01fa3d9feb49620f65467879c..b7e628c6f7c3ca74bf2372d9afce57b27137ec29:/doc/todo/want_to_avoid_ikiwiki_using_http_or_https_in_urls_to_allow_serving_both.mdwn
diff --git a/doc/todo/want_to_avoid_ikiwiki_using_http_or_https_in_urls_to_allow_serving_both.mdwn b/doc/todo/want_to_avoid_ikiwiki_using_http_or_https_in_urls_to_allow_serving_both.mdwn
index 5f17e3ae0..6ede7f91e 100644
--- a/doc/todo/want_to_avoid_ikiwiki_using_http_or_https_in_urls_to_allow_serving_both.mdwn
+++ b/doc/todo/want_to_avoid_ikiwiki_using_http_or_https_in_urls_to_allow_serving_both.mdwn
@@ -1,3 +1,46 @@
+## current status
+
+[[done]] again! :)
+
+Actually, there are two places where the configured url is still hardcoded:
+
+1. When searching, all the links will use it. This is annoying to fix,
+ and we deem it not a problem.
+2. When ikiwiki dies with an error, the links on the error page will
+ use it. Too bad :)
+
+------
+
+## semi-old
+
+
+* CGI pages, with the exception of edit pages, set `` to
+ `$config{url}`
+
+ I had to revert using `baseurl(undef)` for that, because it needs
+ to be a full url.
+
+ Ideally, baseurl would return an absolute url derived from the url
+ being used to access the cgi, but that needs access to the CGI object,
+ which it does not currently have. Similarly, `misctemplate`
+ does not have access to the CGI object, so it cannot use it to
+ generate a better baseurl. Not sure yet what to do; may have to thread
+ a cgi parameter through all the calls to misctemplate. --[[Joey]]
+
+ > Fixed, cgitemplate is used now. --[[Joey]]
+
+* Using `do=goto` to go to a comment or recentchanges item
+ will redirect to the `$config{url}`-based url, since the
+ permalinks are made to be absolute urls now.
+
+ Fixing this would seem to involve making meta force permalinks
+ to absolute urls when fulling out templates, while allowing them
+ to be left as partial urls internally, for use by goto. --[[Joey]]
+
+ > This reversion has now been fixed. --[[Joey]]
+
+## old attempt
+
It looks like all links in websites are absolute paths, this has some limitations:
* If connecting to website via https://... all links will take you back to http://
@@ -12,20 +55,322 @@ It would be good if relative paths could be used instead, so the transport metho
> "../../", and "../". The only absolute links are to CGIs and the w3c DTD.
> --[[Joey]]
->> The problem is within the CGI script. The links within the HTML page are all absolute, including links to the css file.
->> Having a http links within a HTML page retrieved using https upset most browsers (I think). Also if I push cancel on the edit page in https, I end up at at http page. -- Brian May
+>> The problem is within the CGI script. The links within the HTML page are all
+>> absolute, including links to the css file. Having a http links within a HTML
+>> page retrieved using https upset most browsers (I think). Also if I push cancel
+>> on the edit page in https, I end up at at http page. -- Brian May
>>> Ikiwiki does not hardcode http links anywhere. If you don't want
>>> it to use such links, change your configuration to use https
>>> consistently. --[[Joey]]
-Errr... That is not a solution, that is a work around. ikiwiki does not hard code the absolute paths, but absolute paths are hard coded in the configuration file. If you want to serve your website so that the majority of users can see it as http, including in rss feeds (this allows proxy caches to cache the contents and has reduced load requirements), but editing is done via https for increased security, it is not possible. I have some ideas how this can be implemented (as ikiwiki has the absolute path to the CGI script and the absolute path to the destination, it should be possible to generate a relative path from one to the other), although some minor issues still need to be resolved. -- Brian May
+Errr... That is not a solution, that is a work around. ikiwiki does not hard
+code the absolute paths, but absolute paths are hard coded in the configuration
+file. If you want to serve your website so that the majority of users can see
+it as http, including in rss feeds (this allows proxy caches to cache the
+contents and has reduced load requirements), but editing is done via https for
+increased security, it is not possible. I have some ideas how this can be
+implemented (as ikiwiki has the absolute path to the CGI script and the
+absolute path to the destination, it should be possible to generate a relative
+path from one to the other), although some minor issues still need to be
+resolved. -- Brian May
-I noticed the links to the images on are also absolute, that is ; this seems surprising, as the change.tmpl file uses <TMPL_VAR BASEURL>
-which seems to do the right thing in page.tmpl, but not for change.tmpl. Where is BASEURL set? -- Brian May
+I noticed the links to the images on are
+also absolute, that is ; this seems
+surprising, as the change.tmpl file uses <TMPL_VAR BASEURL> which seems
+to do the right thing in page.tmpl, but not for change.tmpl. Where is BASEURL
+set? -- Brian May
> The use of an absolute baseurl in change.tmpl is a special case. --[[Joey]]
-So I'm facing this same issue. I have a wiki which needs to be accessed on three different URLs(!) and the hard coding of the URL from the setup file is becoming a problem for me. Is there anything I can do here? --[[Perry]]
+So I'm facing this same issue. I have a wiki which needs to be accessed on
+three different URLs(!) and the hard coding of the URL from the setup file is
+becoming a problem for me. Is there anything I can do here? --[[Perry]]
+
+> I remain puzzled by the problem that Brian is discussing. I don't see
+> why you can't just set the cgiurl and url to a https url, and serve
+> the site using both http and https.
+>
+> Just for example, is an ikiwiki, and it is accessible
+> via https or http, and if you use https, links will remain on https (except
+> for links using the cgi, which I could fix by changing the cgiurl to https).
+>
+> I think it's possible ikiwiki used to have some
+> absolute urls that have been fixed since Brian filed the bug. --[[Joey]]
[[wishlist]]
+
+----
+
+[[!toggle id="smcv-https" text="Some discussion of a rejected implementation, smcv/https."]]
+[[!toggleable id="smcv-https" text="""
+
+[[!template id=gitbranch branch=smcv/https author="[[smcv]]"]]
+
+For a while I've been using a configuration where each wiki has a HTTP and
+a HTTPS mirror, and updating one automatically updates the other, but
+that seems unnecessarily complicated. My `https` branch adds `https_url`
+and `https_cgiurl` config options which can be used to provide a HTTPS
+variant of an existing site; the CGI script automatically detects whether
+it was accessed over HTTPS and switches to the other one.
+
+This required some refactoring, which might be worth merging even if
+you don't like my approach:
+
+* change `IkiWiki::cgiurl` to return the equivalent of `$config{cgiurl}` if
+ called with no parameters, and change all plugins to indirect through it
+ (then I only need to change that one function for the HTTPS hack)
+
+* `IkiWiki::baseurl` already has similar behaviour, so change nearly all
+ references to the `$config{url}` to call `baseurl` (a couple of references
+ specifically wanted the top-level public URL for Google or Blogspam rather
+ than a URL for the user's browser, so I left those alone)
+
+--[[smcv]]
+
+> The justification for your patch seems to be wanting to use a different
+> domain, like secure.foo.com, for https? Can you really not just configure
+> both url and cgiurl to use `https://secure.foo.com/...` and rely on
+> relative links to keep users of `http://insecure.foo.com/` on http until
+> they need to use the cgi?
+
+>> My problem with that is that uses of the CGI aren't all equal (and that
+>> the CA model is broken). You could put CGI uses in two classes:
+>>
+>> - websetup and other "serious" things (for the sites I'm running, which
+>> aren't very wiki-like, editing pages is also in this class).
+>> I'd like to be able to let privileged users log in over
+>> https with httpauth (or possibly even a client certificate), and I don't
+>> mind teaching these few people how to do the necessary contortions to
+>> enable something like CACert.
+>>
+>> - Random users making limited use of the CGI: do=goto, do=404, and
+>> commenting with an OpenID. I don't think it's realistic to expect
+>> users to jump through all the CA hoops to get CACert installed for that,
+>> which leaves their browsers being actively obstructive, unless I either
+>> pay the CA tax (per subdomain) to get "real" certificates, or use plain
+>> http.
+>>
+>> On a more wiki-like wiki, the second group would include normal page edits.
+>>
+>>> I see your use case. It still seems to me that for the more common
+>>> case where CA tax has been paid (getting a cert that is valid for
+>>> multiple subdomains should be doable?), having anything going through the
+>>> cgiurl upgrade to https would be ok. In that case, http is just an
+>>> optimisation for low-value, high-aggregate-bandwidth type uses, so a
+>>> little extra https on the side is not a big deal. --[[Joey]]
+>>
+>> Perhaps I'm doing this backwards, and instead of having the master
+>> `url`/`cgiurl` be the HTTP version and providing tweakables to override
+>> these with HTTPS, I should be overriding particular uses to plain HTTP...
+>>
+>> --[[smcv]]
+>>>
+>>> Maybe, or I wonder if you could just use RewriteEngine for such selective
+>>> up/downgrading. Match on `do=(edit|create|prefs)`. --[[Joey]]
+
+> I'm unconvinced.
+>
+> `Ikiwiki::baseurl()."foo"` just seems to be asking for trouble,
+> ie being accidentially written as `IkiWiki::baseurl("foo")`,
+> which will fail when foo is not a page, but some file.
+
+>> That's a good point. --s
+
+> I see multiple places (inline.pm, meta.pm, poll.pm, recentchanges.pm)
+> where it will now put the https url into a static page if the build
+> happens to be done by the cgi accessed via https, but not otherwise.
+> I would rather not have to audit for such problems going forward.
+
+>> Yes, that's a problem with this approach (either way round). Perhaps
+>> making it easier to run two mostly-synched copies like I was previously
+>> doing is the only solution... --s
+
+"""]]
+
+----
+
+[[!template id=gitbranch branch=smcv/ready/localurl author="[[smcv]]"]]
+[[!tag patch]]
+
+OK, here's an alternative approach, closer in spirit to what was initially
+requested. I included a regression test for `urlto`, `baseurl` and `cgiurl`,
+now that they have slightly more complex behaviour.
+
+The idea is that in the common case, the CGI and the pages will reside on the
+same server, so they can use "semi-absolute" URLs (`/ikiwiki.cgi`, `/style.css`,
+`/bugs/done`) to refer to each other. Most redirects, form actions, links etc.
+can safely use this form rather than the fully-absolute URL.
+
+The initial version of the branch had config options `local_url` and
+`local_cgiurl`, but they're now automatically computed by checking
+whether `url` and `cgiurl` are on the same server with the the same URL
+scheme. In theory you could use things like `//static.example.com/wiki/`
+and `//dynamic.example.com/ikiwiki.cgi` to preserve choice of http/https
+while switching server, but I don't know how consistently browsers
+support that.
+
+"local" here is short for "locally valid", because these URLs are neither
+fully relative nor fully absolute, and there doesn't seem to be a good name
+for them...
+
+I've tested this on a demo website with the CGI enabled, and it seemed to
+work nicely (there might be bugs in some plugins, I didn't try all of them).
+The branch at [[todo/use secure cookies for SSL logins]] goes well with
+this one.
+
+The `$config{url}` and `$config{cgiurl}` are both HTTP, but if I enable
+`httpauth`, set `cgiauthurl` to a HTTPS version of the same site and log
+in via that, links all end up in the HTTPS version.
+
+New API added by this branch:
+
+* `urlto(x, y, 'local')` uses `$local_url` instead of `$config{url}`
+
+ > Yikes. I see why you wanted to keep it to 3 parameters (4 is too many,
+ > and po overrides it), but I dislike overloading the third parameter
+ > like that.
+ >
+ > There are fairly few calls to `urlto($foo, $bar)`, so why not
+ > make that always return the semi-local url form, and leave the third
+ > parameter for the cases that need a true fully-qualified url.
+ > The new form for local urls will typically be only a little bit longer,
+ > except in the unusual case where the cgiurl is elsewhere. --[[Joey]]
+
+ >> So, have urlto(x, y) use `$local_url`? There are few calls, but IMO
+ >> they're for the most important things - wikilinks, img, map and
+ >> other ordinary hyperlinks. Using `$local_url` would be fine for
+ >> webserver-based use, but it does stop you browsing your wiki's
+ >> HTML over `file:///` (unless you set that as the base URL, but
+ >> then you can't move it around), and stops you moving simple
+ >> outputs (like the docwiki!) around.
+ >>
+ >> I personally think breaking the docwiki is enough to block that.
+ >>
+ >>> Well, the docwiki doesn't have an url configured at all, so I assumed
+ >>> it would need to fall back to current behavior in that case. I had
+ >>> not thought about browsing wiki's html files though, good point.
+ >>
+ >> How about this?
+ >>
+ >> * `urlto($link, $page)` with `$page` defined: relative
+ >> * `urlto($link, undef)`: local, starts with `/`
+ >> * `urlto($link)`: also local, as a side-effect
+ >> * `urlto($link, $anything, 1)` (but idiomatically, `$anything` is
+ >> normally undef): absolute, starts with `http[s]://`
+ >>
+ >> --[[smcv]]
+ >>
+ >>> That makes a great deal of sense, bravo for actually removing
+ >>> parameters in the common case while maintaining backwards
+ >>> compatability! --[[Joey]]
+ >>>
+ >>>> Done in my `localurl` branch; not tested in a whole-wiki way
+ >>>> yet, but I did add a regression test. I've used
+ >>>> `urlto(x, undef)` rather than `urlto(x)` so far, but I could
+ >>>> go back through the codebase using the short form if you'd
+ >>>> prefer. --[[smcv]]
+ >>>
+ >>> It does highlight that it would be better to have a
+ >>> `absolute_urlto($link)` (or maybe `absolute(urlto($link))` )
+ >>> rather than the 3 parameter form. --[[Joey]]
+ >>>
+ >>> Possibly. I haven't added this.
+
+* `IkiWiki::baseurl` has a new second argument which works like the
+ third argument of `urlto`
+
+ > I assume you have no objection to this --[[smcv]]
+
+ >> It's so little used that I don't really care if it's a bit ugly.
+ >> (But I assume changes to `urlto` will follow through here anyway.)
+ >> --[[Joey]]
+
+ >>> I had to use it a bit more, as a replacement for `$config{url}`
+ >>> when doing things like referencing stylesheets or redirecting to
+ >>> the top of the wiki.
+ >>>
+ >>> I ended up redoing this without the extra parameter. Previously,
+ >>> `baseurl(undef)` was the absolute URL; now, `baseurl(undef)` is
+ >>> the local path. I know you objected to me using `baseurl()` in
+ >>> an earlier branch, because `baseurl().$x` looks confusingly
+ >>> similar to `baseurl($x)` but has totally different semantics;
+ >>> I've generally written it `baseurl(undef)` now, to be more
+ >>> explicit. --[[smcv]]
+
+* `IkiWiki::cgiurl` uses `$local_cgiurl` if passed `local_cgiurl => 1`
+
+ > Now changed to always use the `$local_cgiurl`. --[[smcv]]
+
+* `IkiWiki::cgiurl` omits the trailing `?` if given no named parameters
+ except `cgiurl` and/or `local_cgiurl`
+
+ > I assume you have no objection to this --[[smcv]]
+ >
+ >> Nod, although I don't know of a use case. --[[Joey]]
+
+ >>> The use-case is that I can replace `$config{cgiurl}` with
+ >>> `IkiWiki::cgiurl()` for things like the action attribute of
+ >>> forms. --[[smcv]]
+
+Fixed bugs:
+
+* I don't think anything except `openid` calls `cgiurl` without also
+ passing in `local_cgiurl => 1`, so perhaps that should be the default;
+ `openid` uses the `cgiurl` named parameter anyway, so there doesn't even
+ necessarily need to be a way to force absolute URLs? Any other module
+ that really needs an absolute URL could use
+ `cgiurl(cgiurl => $config{cgiurl}, ...)`,
+ although that does look a bit strange
+
+ > I agree that makes sense. --[[Joey]]
+
+ >> I'm not completely sure whether you're agreeing with "perhaps do this"
+ >> or "that looks too strange", so please disambiguate:
+ >> would you accept a patch that makes `cgiurl` default to a local
+ >> (starts-with-`/`) result? If you would, that'd reduce the diff. --[[smcv]]
+
+ >>> Yes, I absolutely think it should default to local. (Note that
+ >>> if `absolute()` were implemented as suggested above, it could also
+ >>> be used with cgiurl if necessary.) --[[Joey]]
+
+ >>>> Done (minus `absolute()`). --[[smcv]]
+
+Potential future things:
+
+* It occurs to me that `IkiWiki::cgiurl` could probably benefit from being
+ exported? Perhaps also `IkiWiki::baseurl`?
+
+ > Possibly, see [[firm_up_plugin_interface]]. --[[Joey]]
+
+ >> Not really part of this branch, though, so wontfix (unless you ask me
+ >> to do so). --[[smcv]]
+
+* Or, to reduce use of the unexported `baseurl` function, it might make
+ sense to give `urlto` a special case that references the root of the wiki,
+ with a trailing slash ready to append stuff: perhaps `urlto('/')`,
+ with usage like this?
+
+ do_something(baseurl => urlto('/', undef, local)`);
+ do_something_else(urlto('/').'style.css');
+ IkiWiki::redirect(urlto('/', undef, 1));
+
+ > AFACIS, `baseurl` is only called in 3 places so I don't think that's
+ > needed. --[[Joey]]
+
+ >> OK, wontfix. For what it's worth, my branch has 6 uses in IkiWiki
+ >> core code (IkiWiki, CGI, Render and the pseudo-core part of editpage)
+ >> and 5 in plugins, since I used it for things like redirection back
+ >> to the top of the wiki --[[smcv]]
+
+merged|done --[[Joey]] (But reopened, see above.)
+
+----
+
+Update: I had to revert part of 296e5cb2fd3690e998b3824d54d317933c595873,
+since it broke openid logins. The openid object requires a complete,
+not a relative cgiurl. I'm not sure if my changing that back to using
+`$config{cgiurl}` will force users back to eg, the non-https version of a
+site when logging in via openid.
+
+> Ok, changed it to use `CGI->url` to get the current absolute cgi url. --[[Joey]]