X-Git-Url: https://scripts.mit.edu/gitweb/www/ikiwiki.git/blobdiff_plain/5fe490c7d7ead8a3c0cf06eeb4363f26ce4874c2..9f34404bb38b69ea7e438581d0c3348e0d99b5fc:/doc/index/discussion.mdwn diff --git a/doc/index/discussion.mdwn b/doc/index/discussion.mdwn index 1e4d2a12b..772aebaf9 100644 --- a/doc/index/discussion.mdwn +++ b/doc/index/discussion.mdwn @@ -25,6 +25,186 @@ of via syslog? > > The reason is that I'm not logged in on the web server regularly to > > check the log files. I'll see whether I can install a logwatch instance. +---- + +# Installation of selected docs (html) + +The latest release has around 560 files (over 2MB) in html. + +Any suggestions or ideas on limiting what html is installed? + +For example, I don't see value in every ikiwiki install out there to also install personal "users" ikiwiki pages. + +For now I copy ikiwiki.setup. And then use pax with -L switch to copy the targets of the symlinks of the basewiki. + +I was thinking of making a list of desired documents from the html directory to install. + +--JeremyReed + +> You don't need any of them, unless you want to read ikiwiki's docs locally. +> +> I don't understand why you're installing the basewiki files manually; +> ikiwiki has a Makefile that will do this for you. --[[Joey]] + +>> The Makefile's install doesn't do what I want so I use different installer for it. +>> It assumes wrong location for man pages for me. (And it should consider using INSTALLVENDORMAN1DIR and +>> MAN1EXT but I don't know about section 8 since I don't know of perl value for that.) +>> I don't want w3m cgi installed; it is optional for my package. +>> I will just patch for that instead of using my own installer. +>> Note: I am working on the pkgsrc package build specification for this. This is for creating +>> packages for NetBSD, DragonFly and other systems that use pkgsrc package system. +>> --JeremyReed + +---- + +# Upgrade steps + +I upgrades from 1.40 to 2.6.1. I ran "ikiwiki --setup" using my existing ikiwiki.setup configuration. +I had many errors like: + + /home/bsdwiki/www/wiki/wikilink/index.html independently created, not overwriting with version from wikilink + BEGIN failed--compilation aborted at (eval 5) line 129. + +and: + + failed renaming /home/bsdwiki/www/wiki/smileys.ikiwiki-new to /home/bsdwiki/www/wiki/smileys: Is a directory + BEGIN failed--compilation aborted at (eval 5) line 129. + +Probably about six errors like this. I worked around this by removing the files and directories it complained about. +Finally it finished. + +> As of version 2.0, ikiwiki enables usedirs by default. See +> [[tips/switching_to_usedirs]] for details. --[[Joey]] + +>> I read the config wrong. I was thinking that it showed the defaults even though commented out +>> (like ssh configs do). I fixed that part. --JeremyReed + +My next problem was that ikiwiki start letting me edit without any password authentication. It used to prompt +me for a password but now just goes right into the "editing" mode. +The release notes for 2.0 say password auth is still on by default. + +> It sounds like you have the anonok plugin enabled? + +>> Where is the default documented? My config doesn't have it uncommented. + +The third problem is that when editing my textbox is empty -- no content. + +This is using my custom rcs.pm which has been used thousands of times. + +> Have you rebuilt the cgi wrapper since you upgraded ikiwiki? AFAIK I +> fixed a bug that could result in the edit box always being empty back in +> version 2.3. The only other way it could happen is if ikiwiki does not +> have saved state about the page that it's editing (in .ikiwiki/index). + +>> Rebuilt it several times. Now that I think of it, I think my early problem of having +>> no content in the textbox was before I rebuilt the cgi. And after I rebuilt the whole webpage was empty. + +Now I regenerated my ikiwiki.cgi again (no change to my configuration, +and I just get an empty HTML page when attempting editing or "create". + +> If the page is completly empty then ikiwiki is crashing before it can +> output anything, though this seems unlikely. Check the webserver logs. + +Now I see it created directories for my data. I fixed that by setting +usedirs (I see that is in the release notes for 2.0) and rerunning ikiwiki --setup +but I still have empty pages for editing (no textbox no html at all). + +> Is IkiWiki crashing? If so, it would probably leave error text in the apache logs. --[[TaylorKillian]] + +>> Not using apache. Nothing useful in logs other thn the HTTP return codes are "0" and bytes is "-" +>> on the empty ikiwiki.cgi output (should say " 200 " followed by bytes). + +>>> You need to either figure out what your web server does with stderr +>>> from cgi programs, or run ikiwiki.cgi at the command line with an +>>> appropriate environment so it thinks it's being called from a web +>>> server, so you can see how it's failing. --[[Joey]] + +(I am posting this now, but will do some research and post some more.) + +Is there any webpage with upgrade steps? + +> Users are expected to read [[news]], which points out any incompatible +> changes or cases where manual action is needed. + +>> I read it but read the usedirs option wrong :(. +>> Also it appears to be missing the news from between 1.40 to 2.0 unless they dont' exist. +>> If they do exist maybe they have release notes I need? + +>>> All the old ones are in the NEWS file. --[[Joey]] + +--JeremyReed + +My followup: I used a new ikiwiki.setup based on the latest version. But no changes for me. + +Also I forgot to mention that do=recentchanges works good for me. It uses my +rcs_recentchanges in my rcs perl module. + +The do=prefs does nothing though -- just a blank webpage. + +> You need to figure out why ikiwiki is crashing. The webserver logs should +> tell you. + +I also set verbose => 1 and running ikiwiki --setup was verbose, but no changes in running CGI. +I was hoping for some output. + +I am guessing that my rcs perl module stopped working on the upgrade. I didn't notice any release notes +on changes to revision control modules. Has something changed? I will also look. + +> No, the rcs interface has not needed to change in a long time. Also, +> nothing is done with the rcs for do=prefs. + +>> Thanks. I also checked differences between 1.40 Rcs plugins and didn't notice anything significant. + +--JeremyReed + +Another Followup: I created a new ikiwiki configuration and did the --setup to +create an entirely different website. I have same problem there. No prompt for password +and empty webpage when using the cgi. +I never upgraded any perl modules so maybe a new perl module is required but I don't see any errors so I don't know. + +The only errors I see when building and installing ikiwiki are: + + Can't exec "otl2html": No such file or directory at IkiWiki/Plugin/otl.pm line 66. + + gettext 0.14 too old, not updating the pot file + +I don't use GNU gettext on here. + +I may need to revert back to my old ikiwiki install which has been used to thousands of times (with around +1000 rcs commits via ikiwiki). + +--JeremyReed + +I downgraded to version 1.40 (that was what I had before I wrote wrong above). +Now ikiwiki is working for me again (but using 1.40). I shouldn't have tested on production system :) + +--JeremyReed + +I am back. On a different system, I installed ikiwiki 2.6.1. Same problem -- blank CGI webpage. + +So I manually ran with: + + REQUEST_METHOD=GET QUERY_STRING='do=create&page=jcr' kiwiki.cgi + +And clearly saw the error: + + [IkiWiki::main] Fatal: Bad template engine CGI::FormBuilder::Template::div: Can't locate CGI/FormBuilder/Template/div.pm + +So I found my version was too old and 3.05 is the first to provide "Div" support. I upgraded my p5-CGI-FormBuilder to 3.0501. +And ikiwiki CGI started working for me. + +The Ikiwiki docs about this requirement got removed in Revision 4367. There should be a page that lists the requirements. +(I guess I could have used the debian/control file.) + +> There is a page, [[install]] documents that 3.05 is needed. + +>> Sorry, I missed that. With hundreds of wikipages it is hard to read all of them. +>> I am updating the download page now to link to it. + +I am now using ikiwiki 2.6.1 on my testing system. + +--JeremyReed + ---- # Excellent - how do I translate a TWiki site? @@ -54,6 +234,15 @@ easily, perl is possible (but I'm not strong in perl). >> Thanks for an excellent Xmas present, I will appreciate the additional >> users this will help switch to ikiwiki! --[[Joey]] + +>> Sounds great indeed. Learning from [here](http://www.bddebian.com/~wiki/AboutTheTWikiToIkiwikiConversion/) that HTML::WikiConverter needed for your conversion was not up-to-date on Debian I have now done an unofficial package, including your proposed Markdown patches, apt-get'able at
deb http://debian.jones.dk/ sid wikitools+>> -- [[JonasSmedegaard]] + + +>>I see the "We will post the scripts ...." was committed about a year ago. A current site search for "Moin" does not turn them up. Any chance of an appearance in the near (end of year) future? +>> +>> -- [[MichaelRasmussen]] + ---- # LaTeX support? @@ -178,32 +367,33 @@ My best regards, --[[PaweÅ|ptecza]] +> See [[bugs/Spaces_in_link_text_for_ikiwiki_links]] + ---- # Build in OpenSolaris? -I've learned I'm not yet clever enough to get IkiWiki to build in OpenSolaris (as running on a [Joyent Accelerator][ja]). Anyone figured this out already? +Moved to [[bugs/build_in_opensolaris]] --[[Joey]] -I think problem lies mostly, if not entirely, in getting ikiwiki.cgi.c to compile in an OpenSolaris context (this is ikiwiki-2.2): +---- ->
$ ikiwiki --setup ~/etc/ikiwiki/ikiwiki-edit.setup
-> [...]
-> Error: failed to compile /home/username/domains/domain.tld/cgi-bin/ikiwiki.cgi.c at /opt/local/lib/perl5/site_perl/IkiWiki.pm line 104.
-BEGIN failed--compilation aborted at (eval 3) line 145.
+# Various ways to use Subversion with ikiwiki
-More specifically,
+I'm playing around with various ways that I can use subversion with ikiwiki.
-> $ /usr/sfw/bin/gcc ikiwiki.cgi.c
-> Undefined first referenced
-> symbol in file
-> asprintf /var/tmp//cczPaG7R.o
-> ld: fatal: Symbol referencing errors. No output written to a.out
-> collect2: ld returned 1 exit status
+* Is it possible to have ikiwiki point to a subversion repository which is on a different server? The basic checkin/checkout functionality seems to work but there doesn't seem to be any way to make the post-commit hook work for a non-local server?
-[ja]: