Do so here..
Note that for more formal bug reports or todo items, you can also edit the
-[[bugs]] and [[todo]] pages.
+[[bugs]] and [[todo]] pages.
+
+# Installation/Setup questions
+
+I have just installed ikiwiki and it works - at least I have the example index.mdwn page
+compiled and visible. However I have a few issues/problems:-
+
+* A couple of the 'optional' Perl modules aren't optional, you can't install ikiwiki without them,
+these are HTML::Template and HTML::Scrubber (at least I think it was these two, it's a bit messy
+to go back and find out).
+
+> You're right, HTML::Template is required. HTML::Scrubber is only required
+> in the default configuration, and is optional if the htmlscrubber plugin
+> is disabled. --[[Joey]]
+
+* I don't seem to have got an ikiwiki man page created.
+
+> It should be installed in /usr/share/man, or a similar directory
+> depending on how your perl is set up and how you did the install.
+> --[[Joey]]
+
+> Found it, in /usr/local/share/man, since no other man pages are in either /usr/share/man or in /usr/local/share/man the ikiwiki
+> man page is a bit lonely, and more to the point not on my MANPATH. Still I have found it now, I'll just move it to somewhere
+> more sensible. [[Chris]]
+
+* Running "ikiwiki --setup ikiwiki.setup" doesn't do anything. I have edited ikiwiki.setup to
+my local settings. There are no errors but neither does anything get compiled. An ikiwiki
+command to explicitly do the compile works fine. Am I misunderstanding something here?
+
+> Further tests indicate that ikiwiki isn't seeing changed files so doesn't always rebuild.
+> How does ikiwiki decide when to rebuild? I tried a full command line like "ikiwiki --verbose ikiwiki ~/public_html/ikiwiki --url=http://www.isbd.ltd.uk/~chris/ikiwiki/" and that doesn't do anything
+either though it was the command line I originally used to compile. After a long interval I 'touch'ed
+the files and then it *did* compile but 'touch'ing the files after a few minutes only doesn't seem to force a recompile. I'm even more confused!
+
+> ikiwiki only compiles files whose modification times have changed. It
+> should see any change made as close as a second after the last compile.
+> When run with --setup, ikiwiki always rebuilds every file in the wiki. If
+> --setup is not working, you must have it pointed at the wrong path or
+> something; you can pass -v to see what it's doing. I don't know why it
+> would not see recently changed files; you could try stracing it.
+> --[[Joey]]
+
+> OK, thanks, I don't quite know what was happening before but it seems to be working right now.
+> --[[Chris]]
+
+>> Weird. I wish I knew what happened, but as it's working now, I'm
+>> guessing some kind of user error was involved. --[[Joey]]
+
+* I wish there was a mailing list, much easier for this sort of stuff than this, apart from
+anything else I get to use a decent editor.
+
+----
+# Excellent - how do I translate a TWiki site?
+
+I just discovered ikiwiki quite by chance, I was looking for a console/terminal
+menu system and found pdmenu. So pdmenu brought me to here and I've found ikiwiki!
+It looks as if it's just what I've been wanting for a long time. I wanted something
+to create mostly text web pages which, as far as possible, have source which is human
+readable or at least in a standard format. ikiwiki does this twice over by using
+markdown for the source and producing static HTML from it.
+
+I'm currently using TWiki and have a fair number of pages in that format, does
+anyone have any bright ideas for translating? I can knock up awk scripts fairly
+easily, perl is possible (but I'm not strong in perl).
+
+> Let us know if you come up with something to transition from the other
+> format. Another option would be writing a ikiwiki plugin to support the
+> TWiki format. --[[Joey]]
+
+> Jamey Sharp and I have a set of scripts in progress to convert other wikis to ikiwiki, including history, so that we can migrate a few of our wikis. We already have support for migrating MoinMoin wikis to ikiwiki, including conversion of the entire history to Git. We used this to convert the [XCB wiki](http://xcb.freedesktop.org/wiki/) to ikiwiki; until we finalize the conversion and put the new wiki in place of the old one, you can browse the converted result at <http://xcb.freedesktop.org/ikiwiki>. We already plan to add support for TWiki (including history, since you can just run parsecvs on the TWiki RCS files to get Git), so that we can convert the [Portland State Aerospace Society wiki](http://psas.pdx.edu) (currently in Moin, but with much of its history in TWiki, and with many of its pages still in TWiki format using Jamey's TWiki format for MoinMoin).
+>
+> Our scripts convert by way of HTML, using portions of the source wiki's code to render as HTML (with some additional code to do things like translate MoinMoin's `\[[TableOfContents]]` to ikiwiki's `\[[toc ]]`), and then using a modified [[cpan HTML::WikiConverter]] to turn this into markdown and ikiwiki. This produces quite satisfactory results, apart from things that don't have any markdown equivalent and thus remain HTML, such as tables and definition lists. Conversion of the history occurs by first using another script we wrote to translate MoinMoin history to Git, then using our git-map script to map a transformation over the Git history.
+>
+> We will post the scripts as soon as we have them complete enough to convert our wikis.
+>
+> -- Josh Triplett
+
+>> Thanks for an excellent Xmas present, I will appreciate the additional
+>> users this will help switch to ikiwiki! --[[Joey]]
+
+----
+
+# OpenID
+
+I just figured I'd edit something on the page with my OpenID, since you've implemented it! --*[Kyle](http://kitenet.net/~kyle/)*=
+
+> Kyle, If you like openid, I can switch your personal wiki over to use your openid. --[[Joey]]
----
-How about adding ACL? So that you can control which users are allowed
-to read, write certain pages. The moinmoin wiki has that, and it is
-something, that I think is very valuable.
+# ACL
+
+> Moved to [[todo/ACL]] --[[Joey]]
+
+----
+
+Some questions about the RecentChanges function. -- Ethan
+
+> (Moved to [[todo/recentchanges]] --[[Joey]])
+
+----
+
+Also, I'd like to request another template parameter which is just
+$config{url}. That way you won't have to hard-code the URL of the wiki into
+the template. -- Ethan
+
+> That's already available in the BASEURL parameter. --[[Joey]]
+
+----
+
+# Canonical feed location?
+
+Moved to [[todo/canonical_feed_location]] --[[Joey]]
+
+----
+
+# asciidoc or txt2tags ?
+
+Any plugins or support for using asciidoc or txt2tags as the wiki language and/or exporting to asciidoc or txt2tags?
+
+> No, but it should be quite easy to write such a plugin. The otl plugin
+> is a good example of writing a formatting plugin that uses an external
+> conversion program, like asciidoc or txt2tags. --[[Joey]]
+
+----
+
+# LaTeX support?
+
+Any plugins or support for exporting to LaTeX?
+(If not could use asciidoc or txt2tags mentioned above to generated LaTeX.)
+
+> It's already [[been_requested|todo/latex]], although perhaps not
+> working the way you're thinking of. Noone is currently working on it.
+> --[[Joey]]
+
+>> I did some tests with using Markdown and a customized HTML::Latex and html2latex
+>> and it appears it will work for me now. (I hope to use ikiwiki for many
+>> to collaborate on a printed book that will be generated at least once per day in PDF format.)
+>>
+>> --JeremyReed
+
+----
+
+# Using with CVS?
+
+Any examples of using ikiwiki with cvs?
+
+> No, although the existing svn backend could fairly esily be modified into
+> a CVS backend, by someone who doesn't mind working with CVS. --[[Joey]]
+
+----
+
+# Show differences before saving page?
+
+It would be nice to be able to have a button to show "Differences" (or "Show Diff") when
+editing a page. Is that an option that can be enabled?
+
+> It's doable, it could even be done by a [[todo/plugin]], I think.
+> --[[Joey]]
+
+----
+
+# Max submit size?
+
+Any setting for limiting how many kilobytes can be submitted via the "edit" form?
+-- [[JeremyReed]]
+
+> Not currently. Worried about abuse? --[[Joey]]
+
+>> I didn't want it abused accidently or with malice. I was thinking that Perl's CGI.pm would handle this, but I don't see that.
+>> I read that textarea max bytes may be 500 lines or 28000 characters or 30000 characters or 64kB. It seems like it
+>> varies and I didn't test myself, because I guess it may depend on different clients and different HTTP servers.
+>> This could be checked using javascript on the client side (before submitting) and by checking size on server side (before saving). --[[JeremyReed]]
+
+>>> The absolute limit varies by browser. If there are web servers that
+>>> also limit it, I don't know of them. --[[Joey]]
+
+----
+
+# Disable sub-discussion pages?
+
+Moved to [[bugs]] -- [[Joey]]
+
+----
+
+# wiki\_file\_regexp and RCS ,v files
+
+I have RCS ,v files in my source directory. But get many "skipping bad filename" warnings.
+
+Also I don't see wiki\_file\_regexp documented. Because it is used with $config{wiki\_file\_regexp} I assume it can be set in the ikiwiki.setup.
+I added a comma to it in my IkiWiki.pm in the defaultconfig(). But that was wrong (so I reverted back), because then the ,v files were copied to my www tree.
+
+What is the correct way to include ,v RCS revision files in my source tree without receiving the "bad" messages and without copying over to www tree?
+
+-- [[JeremyReed]]
+
+> Add the ,v to the $config{wiki\_file\_prune\_regexps} array. This is how we
+> skip equivilant files from other revision control systems too.
+> --[[Joey]]]
+
+>> Okay, I used in my setup configuration:
+>> exclude => qr/\,v$/,
+>> I looked in source for the array you mentioned above and noticed the $setup{exclude}. And now I see that is documented.
+>> (By the way, the example there doesn't seem correct with a literal asterisk and period wildcard.
+>> Maybe it should be qr/\.wav$/,)
+>> --[[JeremyReed]]
+
+----
+
+# Textile Plugin
+
+It was trivial, but I put together a plugin that uses the Textile markup
+language, which I find to be the most superior of the various options for
+that sort of thing. Where or how do I submit it for inclusion?
+
+> You can post it to [[plugins/contrib]]. --[[Joey]]
+
+>> Thanks. I tried using the "Add new post" form there, but apparently made a [mess of things somehow](http://ikiwiki.kitenet.net/contrib/textile___40__third-party_plugin__41__.html). Sorry about that.
+
+>>> No problem, the contrib form had the wrong rootpage setting. I've fixed
+>>> it up and moved it to the right place. A copyright statement would be
+>>> nice.
+
+> How does one go about making a markup language added by means of a plugin, the default markup language. In other words, I would like the index page to be written in Textile.
+> If I include a index.txtl (where txtl is the extension I have assigned to be handled by the textile plugin), ikiwiki will ignore it and make a new index.mdwn.
+
+>> Sounds like a bug; it should be configurable via `default_pageext`, but
+>> I suspect that currently if there are two competing files with different
+>> extensions that make the same page, they fight it out and some random
+>> one "wins"
+>>
+>> Until I fix that, you can avoid the one from the underlay directory by
+>> setting `underlaydir` to point to an empty directory. --[[Joey]]
+>>
+>> Ok, fixed (in svn), it will now prefer files in the srcdir over files
+>> in the underlaydir that build the same page, no matter what extension.