`IkiWiki::Plugin::skeleton` that can be fleshed out to make a useful
plugin. `IkiWiki::Plugin::pagecount` is another simple example.
-# Note
+[[toc levels=2]]
+
+## Considerations
One thing to keep in mind when writing a plugin is that ikiwiki is a wiki
*compiler*. So plugins influence pages when they are built, not when they
change until ikiwiki rebuilds the page for some other reason, like the page
being edited.
-# Registering plugins
+## Registering plugins
+
+All plugins should `use IkiWiki` to import the ikiwiki plugin interface.
+It's a good idea to include the version number of the plugin interface that
+your plugin expects: `use IkiWiki 2.00`
-Plugins should, when imported, call IkiWiki::hook to hook into ikiwiki's
+Plugins should, when imported, call `hook()` to hook into ikiwiki's
processing. The function uses named parameters, and use varies depending on
-the type of plugin being registered. Note that a plugin can call the
-function more than once to register multiple hooks. All calls to
-IkiWiki::hook should be passed a "type" parameter, which gives the type of
+the type of hook being registered -- see below. Note that a plugin can call
+the function more than once to register multiple hooks. All calls to
+`hook()` should be passed a "type" parameter, which gives the type of
hook, a "id" paramter, which should be a unique string for this plugin, and
a "call" parameter, which is a reference to a function to call for the
hook.
-# Writing a [[PreProcessorDirective]]
+An optional "last" parameter, if set to a true value, makes the hook run
+after all other hooks of its type. Useful if the hook depends on some other
+hook being run first.
-This is probably the most common use of a plugin.
+## Types of hooks
- IkiWiki::hook(type => "preprocess", id => "foo", call => \&preprocess);
+In roughly the order they are called.
-Replace "foo" with the command name that will be used inside brackers for
-the preprocessor directive.
+### getopt
-Each time the directive is processed, the referenced function (`preprocess`
-in the example above) is called, and is passed named parameters. A "page"
-parameter gives the name of the page that embedded the preprocessor
-directive, while a "destpage" parameter gices the name of the page the
-content is going to (different for inlined pages). All parameters included
-in the directive are included as named parameters as well. Whatever the
-function returns goes onto the page in place of the directive.
+ hook(type => "getopt", id => "foo", call => \&getopt);
-## Error handing
+This allows for plugins to perform their own processing of command-line
+options and so add options to the ikiwiki command line. It's called during
+command line processing, with @ARGV full of any options that ikiwiki was
+not able to process on its own. The function should process any options it
+can, removing them from @ARGV, and probably recording the configuration
+settings in %config. It should take care not to abort if it sees
+an option it cannot process, and should just skip over those options and
+leave them in @ARGV.
-While a plugin can call ikiwiki's error routine for a fatal error, for
-errors that aren't intended to halt the entire wiki build, including bad
-parameters passed to a [[PreProcessorDirective]], etc, it's better to just
-return the error message as the output of the plugin.
+### checkconfig
-## Html issues
+ hook(type => "checkconfig", id => "foo", call => \&checkconfig);
-Note that if the [[htmlscrubber]] is enabled, html in
-[[PreProcessorDirective]] output is sanitised, which may limit what your
-plugin can do. Also, the rest of the page content is not in html format at
-preprocessor time. Text output by a preprocessor directive will be passed
-through markdown (or whatever engine is used to htmlize the page) along
-with the rest of the page.
+This is useful if the plugin needs to check for or modify ikiwiki's
+configuration. It's called early in the startup process. The
+function is passed no values. It's ok for the function to call
+`error()` if something isn't configured right.
-# Other types of hooks
+### needsbuild
-Beyond PreProcessorDirectives, Other types of hooks that can be used by
-plugins include:
+ hook(type => "needsbuild", id => "foo", call => \&needsbuild);
-## checkconfig
+This allows a plugin the manipulate the list of files that need to be
+built when the wiki is refreshed. The function is passed a reference to an
+array of pages that will be rebuilt, and can modify the array, either
+adding or removing files from it.
- IkiWiki::hook(type => "checkconfig", id => "foo", call => \&checkconfig);
+### filter
-This is useful if the plugin needs to check for, or modify ikiwiki's
-configuration. It's called early in the ikiwiki startup process. The
-function is passed no values. It's ok for the function to call
-IkiWiki::error if something isn't configured right.
+ hook(type => "filter", id => "foo", call => \&filter);
-## filter
+Runs on the raw source of a page, before anything else touches it, and can
+make arbitrary changes. The function is passed named parameters "page",
+"destpage", and "content". It should return the filtered content.
- IkiWiki::hook(type => "filter", id => "foo", call => \&filter);
+### preprocess
-Runs on the raw source of a page, before anything else touches it, and can
-make arbitrary changes. The function is passed named parameters `page` and
-`content` and should return the filtered content.
+Adding a [[PreProcessorDirective]] is probably the most common use of a
+plugin.
-## htmlize
+ hook(type => "preprocess", id => "foo", call => \&preprocess);
- IkiWiki::hook(type => "htmlize", id => "ext", call => \&filter);
+Replace "foo" with the command name that will be used inside brackets for
+the preprocessor directive.
+
+Each time the directive is processed, the referenced function (`preprocess`
+in the example above) is called, and is passed named parameters. A "page"
+parameter gives the name of the page that embedded the preprocessor
+directive, while a "destpage" parameter gives the name of the page the
+content is going to (different for inlined pages), and a "preview"
+parameter is set to a true value if the page is being previewed. All
+parameters included in the directive are included as named parameters as
+well. Whatever the function returns goes onto the page in place of the
+directive.
+
+An optional "scan" parameter, if set to a true value, makes the hook be
+called during the preliminary scan that ikiwiki makes of updated pages,
+before begining to render pages. This parameter should be set to true if
+the hook modifies data in `%links`. Note that doing so will make the hook
+be run twice per page build, so avoid doing it for expensive hooks.
+
+Note that if the [[htmlscrubber]] is enabled, html in
+[[PreProcessorDirective]] output is sanitised, which may limit what your
+plugin can do. Also, the rest of the page content is not in html format at
+preprocessor time. Text output by a preprocessor directive will be
+linkified and passed through markdown (or whatever engine is used to htmlize
+the page) along with the rest of the page.
+
+### htmlize
+
+ hook(type => "htmlize", id => "ext", call => \&htmlize);
Runs on the raw source of a page and turns it into html. The id parameter
specifies the filename extension that a file must have to be htmlized using
this plugin. This is how you can add support for new and exciting markup
languages to ikiwiki.
-## pagetemplate
+The function is passed named parameters: "page" and "content" and should
+return the htmlized content.
- IkiWiki::hook(type => "pagetemplate", id => "foo", call => \&pagetemplate);
+### pagetemplate
-Each time a page is rendered, a [[template|templates]] is filled out.
-This hook allows modifying that template. The function is passed named
-parameters. The "page" and "destpage" parameters are the same as for a
-preprocess hook. The "template" parameter is a `HTML::Template` object that
-is the template that will be used to generate the page. The function
-can manipulate that template object.
+ hook(type => "pagetemplate", id => "foo", call => \&pagetemplate);
-The most common thing to do is probably to call $template->param() to add
-a new custom parameter to the template. Note that in order to be robust,
-it's a good idea to check whether the template has a variable before trying
-to set it, as setting a variable that's not present is an error.
+[[Templates]] are filled out for many different things in ikiwiki, like
+generating a page, or part of a blog page, or an rss feed, or a cgi. This
+hook allows modifying those templates. The function is passed named
+parameters. The "page" and "destpage" parameters are the same as for a
+preprocess hook. The "template" parameter is a [[cpan HTML::Template]]
+object that is the template that will be used to generate the page. The
+function can manipulate that template object.
- if ($template->query(name => 'foo')) {
- $template->param("foo" => "bar");
- }
+The most common thing to do is probably to call `$template->param()` to add
+a new custom parameter to the template.
-## sanitize
+### sanitize
- IkiWiki::hook(type => "sanitize", id => "foo", call => \&sanitize);
+ hook(type => "sanitize", id => "foo", call => \&sanitize);
Use this to implement html sanitization or anything else that needs to
-modify the content of a page after it has been fully converted to html.
-The function is passed the page content and should return the sanitized
-content.
+modify the body of a page after it has been fully converted to html.
+
+The function is passed named parameters: "page" and "content", and
+should return the sanitized content.
-## delete
+### format
- IkiWiki::hook(type => "delete", id => "foo", call => \&dele);
+ hook(type => "format", id => "foo", call => \&format);
+
+The difference between format and sanitize is that sanitize only acts on
+the page body, while format can modify the entire html page including the
+header and footer inserted by ikiwiki, the html document type, etc.
+
+The function is passed named parameters: "page" and "content", and
+should return the formatted content.
+
+### delete
+
+ hook(type => "delete", id => "foo", call => \&delete);
Each time a page or pages is removed from the wiki, the referenced function
is called, and passed the names of the source files that were removed.
-## change
+### change
- IkiWiki::hook(type => "change", id => "foo", call => \&render);
+ hook(type => "change", id => "foo", call => \&render);
Each time ikiwiki renders a change or addition (but not deletion) to the
wiki, the referenced function is called, and passed the names of the
source files that were rendered.
-## cgi
+### cgi
- IkiWiki::hook(type => "cgi", id => "foo", call => \&cgi);
+ hook(type => "cgi", id => "foo", call => \&cgi);
Use this to hook into ikiwiki's cgi script. Each registered cgi hook is
called in turn, and passed a CGI object. The hook should examine the
-parameters, and if it will handle this CGI request, output a page and
+parameters, and if it will handle this CGI request, output a page (including the http headers) and
terminate the program.
-# Wiki configuration
+### auth
+
+ hook(type => "auth", id => "foo", call => \&auth);
+
+This hook can be used to implement a different authentication method than
+the standard web form. When a user needs to be authenticated, each registered
+auth hook is called in turn, and passed a CGI object and a session object.
+
+If the hook is able to authenticate the user, it should set the session
+object's "name" parameter to the authenticated user's name. Note that
+if the name is set to the name of a user who is not registered,
+a basic registration of the user will be automatically performed.
+
+### canedit
+
+ hook(type => "canedit", id => "foo", call => \&pagelocked);
+
+This hook can be used to implement arbitrary access methods to control when
+a page can be edited using the web interface (commits from revision control
+bypass it). When a page is edited, each registered canedit hook is called
+in turn, and passed the page name, a CGI object, and a session object.
+
+If edit can proceed, the hook should return "". If the edit is not allowed
+by this hook, the hook should return an error message for the user to see.
+If the hook has no opinion about whether the edit can proceed, return
+`undef`, and the next plugin will be asked to decide.
+
+### formbuilder
+
+ hook(type => "formbuilder_setup", id => "foo", call => \&formbuilder_setup);
+ hook(type => "formbuilder", id => "foo", call => \&formbuilder);
-A plugin can access the wiki's configuration via the `%IkiWiki::config`
+These hooks allow tapping into the parts of ikiwiki that use [[cpan
+CGI::FormBuilder]] to generate web forms. These hooks are passed named
+parameters: `cgi`, `session`, and `form`. These are, respectively, the
+`CGI` object, the user's `CGI::Session`, and a `CGI::FormBuilder`.
+
+Each time a form is set up, the `formbuilder_setup` hook is called.
+Typically the `formbuilder_setup` hook will check the form's title, and if
+it's a form that it needs to modify, will call various methods to
+add/remove/change fields, tweak the validation code for the fields, etc. It
+will not validate or display the form.
+
+Form validation and display can be overridden by the formbuilder hook.
+By default, ikiwiki will do a basic validation and display of the form,
+but if this hook is registered, it will stop that and let the hook take
+over. This hook is passed an additional named parameter: `buttons` is an
+array of the submit buttons for the form.
+
+### savestate
+
+ hook(type => "savestate", id => "foo", call => \&savestate);
+
+This hook is called wheneven ikiwiki normally saves its state, just before
+the state is saved. The function can save other state, modify values before
+they're saved, etc.
+
+## Plugin interface
+
+To import the ikiwiki plugin interface:
+
+ use IkiWiki '1.00';
+
+This will import several variables and functions into your plugin's
+namespace. These variables and functions are the ones most plugins need,
+and a special effort will be made to avoid changing them in incompatible
+ways, and to document any changes that have to be made in the future.
+
+Note that IkiWiki also provides other variables functions that are not
+exported by default. No guarantee is made about these in the future, so if
+it's not exported, the wise choice is to not use it.
+
+### %config
+
+A plugin can access the wiki's configuration via the `%config`
hash. The best way to understand the contents of the hash is to look at
[[ikiwiki.setup]], which sets the hash content to configure the wiki.
-# Wiki data
+### Other variables
If your plugin needs to access data about other pages in the wiki. It can
use the following hashes, using a page name as the key:
-* `%IkiWiki::links` lists the names of each page
- that a page links to, in an array reference.
-* `%IkiWiki::pagemtime` contains the last modification time of each page
-* `%IkiWiki::pagectime` contains the creation time of each page
-* `%IkiWiki::renderedfiles` contains the name of the file rendered by a
- page
-* `%IkiWiki::pagesources` contains the name of the source file for a page.
-* `%IkiWiki::depends` contains a [[GlobList]] that is used to specify other
- pages that a page depends on. If one of its dependencies is updated, the
- page will also get rebuilt.
-
- Many plugins will need to add dependencies to this hash; the best way to do
- it is by using the IkiWiki::add_depends function, which takes as its
- parameters the page name and a [[GlobList]] of dependencies to add.
-
-# A note on generating html links
+* `links` lists the names of each page that a page links to, in an array
+ reference.
+* `%destsources` contains the name of the source file used to create each
+ destination file.
+* `%pagesources` contains the name of the source file for each page.
+
+Also, the %IkiWiki::version variable contains the version number for the
+ikiwiki program.
+
+### Library functions
+
+#### `hook(@)`
+
+Hook into ikiwiki's processing. See the discussion of hooks above.
+
+Note that in addition to the named parameters described above, a parameter
+named `no_override` is supported, If it's set to a true value, then this hook
+will not override any existing hook with the same id. This is useful if
+the id can be controled by the user.
+
+#### `debug($)`
+
+Logs a debugging message. These are supressed unless verbose mode is turned
+on.
+
+#### `error($;$)`
+
+Aborts with an error message. If the second parameter is passed, it is a
+function that is called after the error message is printed, to do any final
+cleanup.
+
+Note that while any plugin can use this for a fatal error, plugins should
+try to avoid dying on bad input, as that will halt the entire wiki build
+and make the wiki unusable. So for example, if a [[PreProcessorDirective]]
+is passed bad parameters, it's better to return an error message, which can
+appear on the wiki page, rather than calling error().
+
+#### `template($;@)`
+
+Creates and returns a [[cpan HTML::Template]] object. The first parameter
+is the name of the file in the template directory. The optional remaining
+parameters are passed to `HTML::Template->new`.
+
+#### `htmlpage($)`
+
+Passed a page name, returns the base name that will be used for a the html
+page created from it. (Ie, it appends ".html".)
+
+#### `add_depends($$)`
+
+Makes the specified page depend on the specified [[PageSpec]].
+
+#### `pagespec_match($$;@)`
+
+Passed a page name, and [[PageSpec]], returns true if the [[PageSpec]]
+matches the page.
+
+Additional named parameters can be passed, to further limit the match.
+The most often used is "location", which specifies the location the
+PageSpec should match against. If not passed, relative PageSpecs will match
+relative to the top of the wiki.
+
+#### `bestlink($$)`
+
+Given a page and the text of a link on the page, determine which
+existing page that link best points to. Prefers pages under a
+subdirectory with the same name as the source page, failing that
+goes down the directory tree to the base looking for matching
+pages, as described in [[SubPage/LinkingRules]].
+
+#### `htmllink($$$;@)`
Many plugins need to generate html links and add them to a page. This is
-done by using the htmllink() function in ikiwiki. The usual way to call
-htmlllink is: `htmllink($page, $page, $link)`
+done by using the `htmllink` function. The usual way to call
+`htmlllink` is:
-Why is $page repeated? Because if a page is inlined inside another, and a
+ htmllink($page, $page, $link)
+
+Why is `$page` repeated? Because if a page is inlined inside another, and a
link is placed on it, the right way to make that link is actually:
-`htmllink($page, $destpage, $link)`
-Here $destpage is the inlining page. A destpage parameter is passed to some
-of the hook functions above; the ones that are not passed it are not used
+ htmllink($page, $destpage, $link)
+
+Here `$destpage` is the inlining page. A `destpage` parameter is passed to
+some of the hook functions above; the ones that are not passed it are not used
during inlining and don't need to worry about this issue.
-# RCS plugins
+After the three required parameters, named parameters can be used to
+control some options. These are:
+
+* noimageinline - set to true to avoid turning links into inline html images
+* forcesubpage - set to force a link to a subpage
+* linktext - set to force the link text to something
+* anchor - set to make the link include an anchor
+
+#### `readfile($;$)`
+
+Given a filename, reads and returns the entire file.
+
+The optional second parameter, if set to a true value, makes the file be read
+in binary mode.
+
+A failure to read the file will result in it dying with an error.
+
+#### `writefile($$$;$$)`
+
+Given a filename, a directory to put it in, and the file's content,
+writes a file.
+
+The optional fourth parameter, if set to a true value, makes the file be
+written in binary mode.
+
+The optional fifth parameter can be used to pass a function reference that
+will be called to handle writing to the file. The function will be called
+and passed a file descriptor it should write to, and an error recovery
+function it should call if the writing fails. (You will not normally need to
+use this interface.)
+
+A failure to write the file will result in it dying with an error.
+
+If the destination directory doesn't exist, it will first be created.
+
+#### `will_render($$)`
+
+Given a page name and a destination file name (not including the base
+destination directory), register that the page will result in that file
+being rendered. It's important to call this before writing to any file in
+the destination directory.
+
+#### `pagetype($)`
+
+Given the name of a source file, returns the type of page it is, if it's
+a type that ikiwiki knowns how to htmlize. Otherwise, returns undef.
+
+#### `pagename($)`
+
+Given the name of a source file, returns the name of the wiki page
+that corresponds to that file.
+
+#### `srcfile($)`
+
+Given the name of a source file in the wiki, searches for the file in
+the source directory and the underlay directory, and returns the full
+path to the first file found.
+
+#### `displaytime($)`
+
+Given a time, formats it for display.
+
+#### `gettext`
+
+This is the standard gettext function, although slightly optimised.
+
+#### `urlto($$)`
+
+Construct a relative url to the first parameter from the second.
+
+#### `targetpage($$)`
+
+Passed a page and an extension, returns the filename that page will be
+rendered to.
+
+## RCS plugins
ikiwiki's support for revision control systems also uses pluggable perl
modules. These are in the `IkiWiki::RCS` namespace, for example
`IkiWiki::RCS::svn`.
-Each RCS plugin must support all the IkiWiki::rcs\_* functions.
+Each RCS plugin must support all the `IkiWiki::rcs_*` functions.
See IkiWiki::RCS::Stub for the full list of functions. It's ok if
-rcs\_getctime does nothing except for throwing an error.
+`rcs_getctime` does nothing except for throwing an error.
See [[about_RCS_backends]] for some more info.
+
+## PageSpec plugins
+
+It's also possible to write plugins that add new functions to
+[[PageSpecs|PageSpec]]. Such a plugin should add a function to the
+IkiWiki::PageSpec package, that is named `match_foo`, where "foo()" is
+how it will be accessed in a [[PageSpec]]. The function will be passed
+two parameters: The name of the page being matched, and the thing to match
+against. It may also be passed additional, named parameters. It should return
+a IkiWiki::SuccessReason object if the match succeeds, or an
+IkiWiki::FailReason object if the match fails.