TODO NOW:
-- geofft/web_scripts.compromised/wiki* have malformed
- .scripts-versions; user friendly error if parse error
- there happens
-- Something needs to be done if disk quota is exceeded:
- - Catch the OSError and throw a domain-specific error
- so massmigrate can deal gracefully
- - Perform an added memory calculation, check this against
- remaining quotai, and bail out if it's within some
- percentage of their remaining quota
- - Checks should also be performed against the partition
- X with the new --shared flag this may not be necessary
- as repos weighs less than 200K
-- Should write to a "processed" file to make resuming with
- unexpected failure faster.
+- Remove "already migrated" cruft that will accumulate if we do small
+ --limit and then increase.
+- Allow to migrate just one user (user filtering of installs, also
+ has userland capabilities, although it means we need some way of
+ selectively publishing the versions directory)
+- Make migrate script rollback if it's interrupted (especially if
+ by signal)
+
+- Make parallel-find.pl use `sudo -u username git describe --tags`
+ to determine version. Make parallel-find.pl have this have greater
+ precedence. (Have patch, pending testing and commit)
+- Make the installer use 'wizard install' /or/ do a migration
+ after doing a normal install (the latter makes it easier
+ for mass-rollbacks).
+- Have the upgrader do locking (.scripts/lock, probably)
+
+- Relax MediaWiki regexes to terminate on semicolon, and not
+ require its own line.
+
+- Better error message if daemon/scripts-security-upd
+ is not on scripts-security-upd list
+
+- MediaWiki upgrade script does not give proper exit code;
+ if it fails, so be sure to check for "Done" in the last 10 characters.
+- Custom merge algo: absolute php.ini symlinks to relative symlinks
+- Custom merge algo: re-constitute AdminSettings.php if missing. It looks
+ like this is the case for most 1.5.8 installs (check what the merges
+ do in both directions). All 1.11.0 installs except four have
+ the other (check diff -u with all in /root)
+
+- Make upgrade and install take version as a parameter
+
+- Redo Wordpress conversion, with an eye for automating everything
+ possible (such as downloading the tarball and unpacking)
+
+- Genericize callAsUser and drop_priviledges in shell
+- Summary script should be more machine friendly, and should not
+ output summary charts when I increase specificity
+
+Some other stuff to do in your copious free time:
+- Summary script should do something intelligent when distinguishing
+ between old-style and new-style installs
- Check how many autoinstalls are missing w bits for
- daemon.scripts
-- Whiteboard the flow for performing an upgrade on a single
- install. How assisted does it need to be?
-- Conduct migration tool testing (check andersk, geofft for
- sample MediaWikis)
-- Set up migration server
-- Run parallel-find.pl
-- Migrate all mediawikis
-- Wordpress needs to have a .scripts/update script written for
- its latest version
+ daemon.scripts (this would need pyafs)
+- Make scripts AFS patch advertise its existence so we can check for it.
+ (This might be otherwise possible using `fs sysname`)
+- Make 'wizard summary' generate nice pretty graphs of installs by date
+ (more histograms, will need to check actual .scripts-version files.)
+- It should be able to handle installs like Django where there's a component
+ that gets installed in web_scripts and another directory that gets installed
+ in Scripts.
+
+PULLING OUT CONFIGURATION FILES IN AN AUTOMATED MANNER
+
+advancedpoll: Template file to fill out
+django: Noodles of template files
+gallery2: Multistage install process
+joomla: Template file
+mediawiki: One-step install process
+phpbb: Multistage install process
+phpical: Template file
+trac: NFC
+turbogears: NFC
+wordpress: Multistage install process
+
+PHILOSOPHY ABOUT LOGGING
+
+Logging is most useful when performing a mass run. This
+includes things such as mass-migration as well as when running
+summary reports. An interesting property about mass-migration
+or mass-upgrade, however, is that if they fail, they are
+idempotent, so an individual case can be debugged simply running
+the single-install equivalent with --debug on. (This, indeed,
+may be easier to do than sifting through a logfile).
+
+It is a different story when you are running a summary report:
+you are primarily bound by your AFS cache and how quickly you can
+iterate through all of the autoinstalls. Checking if a file
+exists on a cold AFS cache may
+take several minutes to perform; on a hot cache the same report
+may take a mere 3 seconds. When you get to more computationally
+expensive calculations, however, even having a hot AFS cache
+is not enough to cut down your runtime.
+
+There are certain calculations that someone may want to be
+able to perform on manipulated data. As such, this data should
+be cached on disk, if the process for extracting this data takes
+a long time. Also, for usability sake, Wizard should generate
+the common case reports.
+
+Ensuring that machine parseable reports are made, and then making
+the machinery to reframe this data, increases complexity. Therefore,
+the recommendation is to assume that if you need to run iteratively,
+you'll have a hot AFS cache at your fingerprints, and if that's not
+fast enough, then cache the data.
+
+COMMIT MESSAGE FIELDS:
+
+Installed-by: username@hostname
+Pre-commit-by: Real Name <username@mit.edu>
+Upgraded-by: Real Name <username@mit.edu>
+Migrated-by: Real Name <username@mit.edu>
+Wizard-revision: abcdef1234567890
+Wizard-args: /wizard/bin/wizard foo bar baz
+
+GIT COMMIT FIELDS:
+
+Committer: Real Name <username@mit.edu>
+Author: lockername locker <lockername@scripts.mit.edu>
NOTES:
-- A perfectly formed autoinstall with upgrade paths for all of
- the intervening versions is not really feasible to implement.
- As such, we want to migrate everything to -scripts, and then
- generate a -scripts2 with the correct .scripts directory.
- We will then nop update some installs, but this will prevent
- us from having to migrate and update concurrently.
-
-- summary and info are still not using loggers. Maybe they should,
- maybe they shouldn't
-
-- We should think about stewarding the amount of objects we use
- by using some arcane Git flags and objects/alternates. Much
- research is needed.
+- It is not expected or required for update scripts to exist for all
+ intervening versions that were present pre-migration; only for it
+ to work on the most recent migration.
+
+- Currently all repositories are initialized with --shared, which
+ means they have basically ~no space footprint. However, it
+ also means that /mit/scripts/wizard/srv MUST NOT lose revs after
+ deployment.
+
+- Full fledged logging options. Namely:
+ x all loggers (delay implementing this until we actually have debug stmts)
+ - default is WARNING
+ - debug => loglevel = DEBUG
+ x stdout logger
+ - default is WARNING (see below for exception)
+ - verbose => loglevel = INFO
+ x file logger (creates a dir and lots of little logfiles)
+ - default is OFF
+ - log-file => loglevel = INFO
OVERALL PLAN:
on documenting them. Specifically, we will be keeping:
- parallel-find.pl, and the resulting
-/mit/scripts/sec-tools/store/scriptslist
+ /mit/scripts/.htaccess/scripts/sec-tools/store/scriptslist
- - The current install scripts will be kept in place, sans changes
- necessary to make them use Git install of copying the script over.
- Porting these scripts to Python and making them modular would be
- nice, but is priority. For the long term, seeing this scripts
- be packaged with rest of our code would be optimal.
+* The new procedure for generating an update is as follows:
+ (check out the mass-migration instructions for something in this spirit,
+ although uglier in some ways; A indicates the step /should/ be automated)
-* The new procedure for generating an update is as follows (this is
- also similar to procedure for creating these repositories):
+ 0. ssh into not-backward, temporarily give the daemon.scripts-security-upd
+ bits by blanching it on system:scripts-security-upd, and run parallel-find.pl
1. Have the Git repository and working copy for the project on hand.
- 2. Checkout the pristine branch
+/- wizard prepare-pristine --
+
+A 2. Checkout the pristine branch
- 3. Remove all files from the working copy (rm -Rf *, and then delete
- any dot stragglers. A script to do this would be handy)
+A 3. Remove all files from the working copy. Use `wipe-working-dir`
- 4. Download the new tarball
+A 4. Download the new tarball
- 5. Extract the tarball over the working copy (`cp -R a/. b` works well,
- remember that the working copy is empty)
+A 5. Extract the tarball over the working copy (`cp -R a/. b` works well,
+ remember that the working copy is empty; this needs some intelligent
+ input)
- 6. Check for empty directories and add stub files as necessary
- (use preserve-empty-dir)
+A 6. Check for empty directories and add stub files as necessary.
+ Use `preserve-empty-dir`
+
+\---
7. Git add it all, and then commit as a new pristine version (v1.2.3)
with --no-commit (otherwise, you want to git commit --amend
to keep our history clean
- [FOR THE FIRST TIME]
- Apply the scripts patch that was used for that version here
- (usually patch -p1 < patch)
+ [FOR NEW REPOSITORIES]
+ Check if any patches are needed to make the application work
+ on Scripts (ideally, it shouldn't.
- 10. Check if there are any special update procedures, and update the
- .scripts/update shell script as necessary (this means that any
- application specific update logic will be kept with the actual
- source code. The language of this update script will vary
- depending on context.)
+/- wizard prepare-new --
- 11. Commit your changes, and tag as v1.2.3-scripts
+ Currently not used for anything besides parallel-find.pl, but
+ we reserve the right to place files in here in the future.
- If you're setting up a repository from scratch, stop here, and
- repeat as necessary
+A mkdir .scripts
+A echo "Deny from all" > .scripts/.htaccess
- XXX: Should we force people to push to the real repository at
- this point, or just make the repository that the script pulls
- stuff out of configurable? (Twiddling origin can get you a
- devel setup with no code changes)
+\---
- 12. Run the "dry-run script", which uses Git commands to check how many
- working copies apply the change cleanly, and writes out a logfile
- with the working copies that don't apply cleanly.
+ 10. Check if there are any special update procedures, and update
+ the wizard.app.APPNAME module accordingly (or create it, if
+ need be).
- 13. Run the "limited run" script, which applies the update to our
- test-bed, and lets us check the basic functionality of the update.
- This can include a script that lets us update a single directory
- with verbose output.
+ 11. Run 'wizard prepare-config' on a scripts server while in a checkout
+ of this newest version. This will prepare a new version of the
+ configuration file based on the application's latest installer.
+ Manually merge back in any custom changes we may have made.
+ Check if any of the regular expressions need tweaking by inspecting
+ the configuration files for user-specific gunk, and modify
+ wizard.app.APPNAME accordingly.
- 14. Run the "deploy" script, which applies the update to all working
- copies possible, and sends mail to users to whom the working copy
- did not apply cleanly. It also frobs .scripts/version for successful
- upgrades.
-
- 15. Run parallel-find.pl
-
-* For mass importing into the repository, the steps are:
-
-[TO SET IT UP]
-# let app-1.2.3 be the scripts folder originally in deploydev
-# let this folder be srv/
-# you can also do a git clone
- mkdir app
- cd app
- git init
- cd ..
-unfurl app-1.2.3 app
-# NOTE: contents of application are now in app directory
-cd app
-git add .
-git commit -s -m "App 1.2.3"
-git tag v1.2.3
-git branch pristine
-# NOTE: you're still on master branch
-# WARNING: the following operation might require -p1
-patch -p0 < ../app-1.2.3/app-1.2.3.patch
-# NOTE: please sanity check the patch!
-git add .
-# NOTE: -a flag is to handle if the patch deleted something
-git commit -as -m "App 1.2.3-scripts"
-git tag v1.2.3-scripts
-
-[TO ADD AN UPDATE]
-# let this folder be srv/app.git
-git checkout pristine
-# NOTE: this preserves your .git folder, but removes everything
-wipe-working-dir .
-cd ..
-unfurl app-1.2.3 app
-cd app
-# NOTE: please sanity check app directory
-git add .
-# NOTE: -a is to take care of deletions
-git commit -as -m "App 1.2.3"
-git tag v1.2.3
-[IF THE PATCH HAS CHANGED]
- # You are on the pristine branch
- # NOTE: Now, the tricky part (this is different from a real update)
- git symbolic-ref HEAD refs/heads/master
- # NOTE: Now, we think we're on the master branch, but we have
- # pristine copy checked out
- # NOTE: -p0 might need to be twiddled
- patch -p0 < ../app-1.2.3/app-1.2.3.patch
- git add .
- # COMMENT: used to git checkout .scripts here
- # then check if the directory needs an updated update script
- # NOTE: Fake the merge
- git rev-parse pristine > .git/MERGE_HEAD
-[IF THE PATCH HASN'T CHANGED]
- git checkout master
- git merge --no-commit pristine
-git commit -as -m "App 1.2.3-scripts"
-git tag v1.2.3-scripts
+ 12. Commit your changes, and tag as v1.2.3-scripts (or scripts2, if
+ you are amending an install without an upstream changes)
+ NOTE: These steps should be run on a scripts server
-* The repository for a given application will contain the following files:
+ 13. Test the new update procedure using our test scripts. See integration
+ tests for more information on how to do this.
- - The actual application's files, as from the official tarball
+ http://scripts.mit.edu/wizard/testing.html#acceptance-tests
- - A .scripts directory, which contains the following information:
+ GET APPROVAL BEFORE PROCEEDING ANY FURTHER
- [IF THIS IS THE FIRST UPDATE]
- mkdir .scripts
- echo "Deny from all" > .scripts/.htaccess
- touch .scripts/update
- chmod a+x .scripts/update
- # OPERATION: create the update script
+ NOTE: The following commands are to be run on not-backward.mit.edu.
+ You'll need to add daemon.scripts-security-upd to
+ scripts-security-upd to get bits to do this. Make sure you remove
+ these bits when you're done.
- * .scripts/update shell script (with the +x bit set appropriately),
- which performs the commands necessary to update a script. This can
- be in any language.
+A 14. Run `wizard research appname`
+ which uses Git commands to check how many
+ working copies apply the change cleanly, and writes out a logfile
+ with the working copies that don't apply cleanly. It also tells
+ us about "corrupt" working copies, i.e. working copies that
+ have over a certain threshold of changes.
- * .scripts/.htaccess to prevent this directory from being accessed
- from the web.
+A 15. Run `wizard mass-upgrade appname`, which applies the update to all working
+ copies possible, and sends mail to users to whom the working copy
+ did not apply cleanly.
- * .scripts/database (generated) contains the database the
- user installed the script to, so scripts-remove can clean it
+ 16. Run parallel-find.pl to update our inventory
- XXX: Could cause problems if a user copies the autoinstall,
- fiddles with the DB credentials, and then scripts-remove's
- the autoinstall. Possible fix is to add the original
- directory as a sanity check. Additionally, we could have
- the application read out of this file.
+* For mass importing into the repository, there are a few extra things:
- * .scripts/version (generated) which contains the version
- last autoinstalled (as distinct from the actual version
- the script is) (This is the same as .scripts-version right
- now; probably want to keep that for now)
+ * Many applications had patches associated with them. Be sure to
+ apply them, so later merges work better.
- XXX: It's unclear if we want to move to this wholesale, or
- delay this indefinitely.
+ # the following operation might require -p1
+ patch -p0 < ../app-1.2.3/app-1.2.3.patch # [FIDDLY BIT]
-* The migration process has been implemented, see 'wizard migrate'.
+ * When running updates, if the patch has changed you will have to
+ do a special procedure for your merge:
- XXX: We have not decided what migration should do to .scripts-version;
- if it does move it to .scripts, repositories should have a .gitignore
- in those directories
+ git checkout pristine
+ # NOTE: Now, the tricky part (this is different from a real update)
+ git symbolic-ref HEAD refs/heads/master
+ # NOTE: Now, we think we're on the master branch, but we have
+ # pristine copy checked out
+ # NOTE: -p0 might need to be twiddled
+ patch -p0 < ../app-1.2.3/app-1.2.3.patch
+ git add .
+ # reconstitute .scripts directory
+ git checkout v1.2.2-scripts -- .scripts
+ git add .scripts
+ # NOTE: Fake the merge
+ git rev-parse pristine > .git/MERGE_HEAD
-* The autoupgrade shall be the process of:
+ You could also just try your luck with a manual merge using the patch
+ as your guide.
- # Make the directory not accessible by the outside world (htaccess, but be careful!)
- git add -u .
- git commit -m 'automatically generated backup'
- git pull origin master
- if [ $? ne 0 ]; then git reset --hard; echo 'conflicts during upgrade'; fi
- ./.scripts/update
- # Make it accessible
+* The repository for a given application will contain the following files:
- (with some more robust error checking)
+ - The actual application's files, as from the official tarball
-* All code that operates on an untrusted Git repository, or runs
- executable code, should be done on NOT-BACKWARD.mit.edu. Pending
- accounts confirmation, it will also get a principal
- daemon.scripts-security-upd, which is what we'll actually put
- in the scripts-security-upd group.
+ - A .scripts directory, with the intent of holding Scripts specific files
+ if they become necessary.
+
+ * .scripts/lock (generated) which locks an autoinstall during upgrade
-* Make 'wizard summary' generate nice pretty graphs of installs by date
- (more histograms, will need to check actual .scripts-version files.)