* depends on it.
*
* Documentation is in the source and on:
- * http://www.mediawiki.org/wiki/Help:Configuration_settings
+ * http://www.mediawiki.org/wiki/Manual:Configuration_settings
*
*/
* Create a site configuration object
* Not used for much in a default install
*/
-require_once( "$IP/includes/SiteConfiguration.php" );
-$wgConf = new SiteConfiguration;
+if ( !defined( 'MW_PHP4' ) ) {
+ require_once( "$IP/includes/SiteConfiguration.php" );
+ $wgConf = new SiteConfiguration;
+}
/** MediaWiki version number */
-$wgVersion = '1.11.0';
+$wgVersion = '1.15.3';
/** Name of the site. It must be changed in LocalSettings.php */
$wgSitename = 'MediaWiki';
-/**
- * Name of the project namespace. If left set to false, $wgSitename will be
+/**
+ * Name of the project namespace. If left set to false, $wgSitename will be
* used instead.
*/
$wgMetaNamespace = false;
/**
- * Name of the project talk namespace. If left set to false, a name derived
- * from the name of the project namespace will be used.
+ * Name of the project talk namespace.
+ *
+ * Normally you can ignore this and it will be something like
+ * $wgMetaNamespace . "_talk". In some languages, you may want to set this
+ * manually for grammatical reasons. It is currently only respected by those
+ * languages where it might be relevant and where no automatic grammar converter
+ * exists.
*/
$wgMetaNamespaceTalk = false;
$wgScriptPath = '/wiki';
/**
- * Whether to support URLs like index.php/Page_title
- * These often break when PHP is set up in CGI mode.
- * PATH_INFO *may* be correct if cgi.fix_pathinfo is
- * set, but then again it may not; lighttpd converts
- * incoming path data to lowercase on systems with
- * case-insensitive filesystems, and there have been
- * reports of problems on Apache as well.
+ * Whether to support URLs like index.php/Page_title These often break when PHP
+ * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
+ * but then again it may not; lighttpd converts incoming path data to lowercase
+ * on systems with case-insensitive filesystems, and there have been reports of
+ * problems on Apache as well.
*
* To be safe we'll continue to keep it off by default.
*
- * Override this to false if $_SERVER['PATH_INFO']
- * contains unexpectedly incorrect garbage, or to
- * true if it is really correct.
- *
- * The default $wgArticlePath will be set based on
- * this value at runtime, but if you have customized
- * it, having this incorrectly set to true can
- * cause redirect loops when "pretty URLs" are used.
+ * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
+ * incorrect garbage, or to true if it is really correct.
*
+ * The default $wgArticlePath will be set based on this value at runtime, but if
+ * you have customized it, having this incorrectly set to true can cause
+ * redirect loops when "pretty URLs" are used.
*/
$wgUsePathInfo =
( strpos( php_sapi_name(), 'cgi' ) === false ) &&
( strpos( php_sapi_name(), 'isapi' ) === false );
-/**#@+
+/**@{
* Script users will request to get articles
- * ATTN: Old installations used wiki.phtml and redirect.phtml -
- * make sure that LocalSettings.php is correctly set!
+ * ATTN: Old installations used wiki.phtml and redirect.phtml - make sure that
+ * LocalSettings.php is correctly set!
*
- * Will be set based on $wgScriptPath in Setup.php if not overridden
- * in LocalSettings.php. Generally you should not need to change this
- * unless you don't like seeing "index.php".
+ * Will be set based on $wgScriptPath in Setup.php if not overridden in
+ * LocalSettings.php. Generally you should not need to change this unless you
+ * don't like seeing "index.php".
*/
-$wgScriptExtension = '.php'; /// extension to append to script names by default
-$wgScript = false; /// defaults to "{$wgScriptPath}/index{$wgScriptExtension}"
-$wgRedirectScript = false; /// defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}"
-/**#@-*/
+$wgScriptExtension = '.php'; ///< extension to append to script names by default
+$wgScript = false; ///< defaults to "{$wgScriptPath}/index{$wgScriptExtension}"
+$wgRedirectScript = false; ///< defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}"
+/**@}*/
-/**#@+
+/**@{
* These various web and file path variables are set to their defaults
* in Setup.php if they are not explicitly set from LocalSettings.php.
* If you do override them, be sure to set them all!
*
* These will relatively rarely need to be set manually, unless you are
* splitting style sheets or images outside the main document root.
- *
- * @global string
*/
/**
* style path as seen by users
*/
-$wgStylePath = false; /// defaults to "{$wgScriptPath}/skins"
+$wgStylePath = false; ///< defaults to "{$wgScriptPath}/skins"
/**
* filesystem stylesheets directory
*/
-$wgStyleDirectory = false; /// defaults to "{$IP}/skins"
+$wgStyleDirectory = false; ///< defaults to "{$IP}/skins"
$wgStyleSheetPath = &$wgStylePath;
-$wgArticlePath = false; /// default to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on $wgUsePathInfo
+$wgArticlePath = false; ///< default to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on $wgUsePathInfo
$wgVariantArticlePath = false;
-$wgUploadPath = false; /// defaults to "{$wgScriptPath}/images"
-$wgUploadDirectory = false; /// defaults to "{$IP}/images"
+$wgUploadPath = false; ///< defaults to "{$wgScriptPath}/images"
+$wgUploadDirectory = false; ///< defaults to "{$IP}/images"
$wgHashedUploadDirectory = true;
-$wgLogo = false; /// defaults to "{$wgStylePath}/common/images/wiki.png"
+$wgLogo = false; ///< defaults to "{$wgStylePath}/common/images/wiki.png"
$wgFavicon = '/favicon.ico';
-$wgMathPath = false; /// defaults to "{$wgUploadPath}/math"
-$wgMathDirectory = false; /// defaults to "{$wgUploadDirectory}/math"
-$wgTmpDirectory = false; /// defaults to "{$wgUploadDirectory}/tmp"
+$wgAppleTouchIcon = false; ///< This one'll actually default to off. For iPhone and iPod Touch web app bookmarks
+$wgMathPath = false; ///< defaults to "{$wgUploadPath}/math"
+$wgMathDirectory = false; ///< defaults to "{$wgUploadDirectory}/math"
+$wgTmpDirectory = false; ///< defaults to "{$wgUploadDirectory}/tmp"
$wgUploadBaseUrl = "";
-/**#@-*/
+/**@}*/
+
+/**
+ * Default value for chmoding of new directories.
+ */
+$wgDirectoryMode = 0777;
/**
* New file storage paths; currently used only for deleted files.
*
*/
$wgFileStore = array();
-$wgFileStore['deleted']['directory'] = false;// Defaults to $wgUploadDirectory/deleted
-$wgFileStore['deleted']['url'] = null; // Private
-$wgFileStore['deleted']['hash'] = 3; // 3-level subdirectory split
+$wgFileStore['deleted']['directory'] = false;///< Defaults to $wgUploadDirectory/deleted
+$wgFileStore['deleted']['url'] = null; ///< Private
+$wgFileStore['deleted']['hash'] = 3; ///< 3-level subdirectory split
-/**#@+
+/**@{
* File repository structures
*
* $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepo is
- * a an array of such structures. Each repository structure is an associative
- * array of properties configuring the repository.
+ * a an array of such structures. Each repository structure is an associative
+ * array of properties configuring the repository.
*
* Properties required for all repos:
- * class The class name for the repository. May come from the core or an extension.
+ * class The class name for the repository. May come from the core or an extension.
* The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
*
* name A unique name for the repository.
- *
+ *
* For all core repos:
* url Base public URL
* hashLevels The number of directory levels for hash-based division of files
* thumbScriptUrl The URL for thumb.php (optional, not recommended)
- * transformVia404 Whether to skip media file transformation on parse and rely on a 404
+ * transformVia404 Whether to skip media file transformation on parse and rely on a 404
* handler instead.
- * initialCapital Equivalent to $wgCapitalLinks, determines whether filenames implicitly
+ * initialCapital Equivalent to $wgCapitalLinks, determines whether filenames implicitly
* start with a capital letter. The current implementation may give incorrect
- * description page links when the local $wgCapitalLinks and initialCapital
+ * description page links when the local $wgCapitalLinks and initialCapital
* are mismatched.
* pathDisclosureProtection
- * May be 'paranoid' to remove all parameters from error messages, 'none' to
- * leave the paths in unchanged, or 'simple' to replace paths with
+ * May be 'paranoid' to remove all parameters from error messages, 'none' to
+ * leave the paths in unchanged, or 'simple' to replace paths with
* placeholders. Default for LocalRepo is 'simple'.
*
* These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
* for local repositories:
* descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/Image:
- * scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
+ * scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
* http://en.wikipedia.org/w
*
* articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
- * fetchDescription Fetch the text of the remote file description page. Equivalent to
+ * fetchDescription Fetch the text of the remote file description page. Equivalent to
* $wgFetchCommonsDescriptions.
*
* ForeignDBRepo:
* equivalent to the corresponding member of $wgDBservers
* tablePrefix Table prefix, the foreign wiki's $wgDBprefix
* hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
+ *
+ * ForeignAPIRepo:
+ * apibase Use for the foreign API's URL
+ * apiThumbCacheExpiry How long to locally cache thumbs for
*
- * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
+ * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
* $wgUploadPath, $wgThumbnailScriptPath, $wgSharedUploadDirectory, etc.
*/
$wgLocalFileRepo = false;
$wgForeignFileRepos = array();
-/**#@-*/
+/**@}*/
/**
* Allowed title characters -- regex character class
'nntp://', // @bug 3808 RFC 1738
'worldwind://',
'mailto:',
- 'news:'
+ 'news:',
+ 'svn://',
);
/** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array.
* Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses.
- * @global string $wgAntivirus
*/
$wgAntivirus= NULL;
* "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
* output. The relevant part should be matched as group one (\1).
* If not defined or the pattern does not match, the full message is shown to the user.
- *
- * @global array $wgAntivirusSetup
*/
$wgAntivirusSetup = array(
);
-/** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected.
- * @global boolean $wgAntivirusRequired
-*/
+/** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
$wgAntivirusRequired= true;
-/** Determines if the mime type of uploaded files should be checked
- * @global boolean $wgVerifyMimeType
-*/
+/** Determines if the mime type of uploaded files should be checked */
$wgVerifyMimeType= true;
-/** Sets the mime type definition file to use by MimeMagic.php.
-* @global string $wgMimeTypeFile
-*/
+/** Sets the mime type definition file to use by MimeMagic.php. */
$wgMimeTypeFile= "includes/mime.types";
#$wgMimeTypeFile= "/etc/mime.types";
#$wgMimeTypeFile= NULL; #use built-in defaults only.
-/** Sets the mime type info file to use by MimeMagic.php.
-* @global string $wgMimeInfoFile
-*/
+/** Sets the mime type info file to use by MimeMagic.php. */
$wgMimeInfoFile= "includes/mime.info";
#$wgMimeInfoFile= NULL; #use built-in defaults only.
/** Switch for loading the FileInfo extension by PECL at runtime.
- * This should be used only if fileinfo is installed as a shared object
+ * This should be used only if fileinfo is installed as a shared object
* or a dynamic libary
- * @global string $wgLoadFileinfoExtension
-*/
+ */
$wgLoadFileinfoExtension= false;
/** Sets an external mime detector program. The command must print only
* the mime type to standard output.
* The name of the file to process will be appended to the command given here.
* If not set or NULL, mime_content_type will be used if available.
-*/
+ */
$wgMimeDetectorCommand= NULL; # use internal mime_content_type function, available since php 4.3.0
#$wgMimeDetectorCommand= "file -bi"; #use external mime detector (Linux)
/** Switch for trivial mime detection. Used by thumb.php to disable all fance
* things, because only a few types of images are needed and file extensions
* can be trusted.
-*/
+ */
$wgTrivialMimeDetection= false;
+/**
+ * Additional XML types we can allow via mime-detection.
+ * array = ( 'rootElement' => 'associatedMimeType' )
+ */
+$wgXMLMimeTypes = array(
+ 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
+ 'svg' => 'image/svg+xml',
+ 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
+ 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
+ 'html' => 'text/html', // application/xhtml+xml?
+);
+
/**
* To set 'pretty' URL paths for actions other than
* plain page views, add to this array. For instance:
* Useful if you want to use a shared repository by default
* without disabling local uploads (use $wgEnableUploads = false for that)
* e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
-*/
+ */
$wgUploadNavigationUrl = false;
/**
*
* Please specify the namespace, as in the example below.
*/
-$wgRepositoryBaseUrl="http://commons.wikimedia.org/wiki/Image:";
-
+$wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/Image:";
#
# Email settings
/**
* Site admin email address
* Default to wikiadmin@SERVER_NAME
- * @global string $wgEmergencyContact
*/
$wgEmergencyContact = 'wikiadmin@' . $wgServerName;
* Password reminder email address
* The address we should use as sender when a user is requesting his password
* Default to apache@SERVER_NAME
- * @global string $wgPasswordSender
*/
$wgPasswordSender = 'MediaWiki Mail <apache@' . $wgServerName . '>';
* Set to true to enable the e-mail basic features:
* Password reminders, etc. If sending e-mail on your
* server doesn't work, you might want to disable this.
- * @global bool $wgEnableEmail
*/
$wgEnableEmail = true;
/**
* Set to true to enable user-to-user e-mail.
* This can potentially be abused, as it's hard to track.
- * @global bool $wgEnableUserEmail
*/
$wgEnableUserEmail = true;
+/**
+ * Set to true to put the sending user's email in a Reply-To header
+ * instead of From. ($wgEmergencyContact will be used as From.)
+ *
+ * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
+ * which can cause problems with SPF validation and leak recipient addressses
+ * when bounces are sent to the sender.
+ */
+$wgUserEmailUseReplyTo = false;
+
/**
* Minimum time, in hours, which must elapse between password reminder
* emails for a given account. This is to prevent abuse by mail flooding.
*/
$wgPasswordReminderResendTime = 24;
+/**
+ * The time, in seconds, when an emailed temporary password expires.
+ */
+$wgNewPasswordExpiry = 3600 * 24 * 7;
+
/**
* SMTP Mode
* For using a direct (authenticated) SMTP server connection.
* "username" => user,
* "password" => password
* </code>
- *
- * @global mixed $wgSMTP
*/
$wgSMTP = false;
-/**#@+
+/**@{
* Database settings
*/
/** database host name or ip address */
$wgDBserver = 'localhost';
-/** database port number */
-$wgDBport = '';
+/** database port number (for PostgreSQL) */
+$wgDBport = 5432;
/** name of the database */
-$wgDBname = 'wikidb';
+$wgDBname = 'my_wiki';
/** */
$wgDBconnection = '';
/** Database username */
$wgDBuser = 'wikiuser';
-/** Database type
- */
-$wgDBtype = "mysql";
+/** Database user's password */
+$wgDBpassword = '';
+/** Database type */
+$wgDBtype = 'mysql';
+
/** Search type
* Leave as null to select the default search engine for the
- * selected database type (eg SearchMySQL4), or set to a class
+ * selected database type (eg SearchMySQL), or set to a class
* name to override to a custom search engine.
*/
$wgSearchType = null;
+
/** Table name prefix */
$wgDBprefix = '';
/** MySQL table options to use during installation or update */
-$wgDBTableOptions = 'TYPE=InnoDB';
+$wgDBTableOptions = 'ENGINE=InnoDB';
+
+/** Mediawiki schema */
+$wgDBmwschema = 'mediawiki';
+/** Tsearch2 schema */
+$wgDBts2schema = 'public';
-/**#@-*/
+/** To override default SQLite data directory ($docroot/../data) */
+$wgSQLiteDataDir = '';
+
+/** Default directory mode for SQLite data directory on creation.
+ * Note that this is different from the default directory mode used
+ * elsewhere.
+ */
+$wgSQLiteDataDirMode = 0700;
+
+/**
+ * Make all database connections secretly go to localhost. Fool the load balancer
+ * thinking there is an arbitrarily large cluster of servers to connect to.
+ * Useful for debugging.
+ */
+$wgAllDBsAreLocalhost = false;
+
+/**@}*/
/** Live high performance sites should disable this - some checks acquire giant mysql locks */
/**
- * Shared database for multiple wikis. Presently used for storing a user table
+ * Shared database for multiple wikis. Commonly used for storing a user table
* for single sign-on. The server for this database must be the same as for the
* main database.
+ * For backwards compatibility the shared prefix is set to the same as the local
+ * prefix, and the user table is listed in the default list of shared tables.
+ *
+ * $wgSharedTables may be customized with a list of tables to share in the shared
+ * datbase. However it is advised to limit what tables you do share as many of
+ * MediaWiki's tables may have side effects if you try to share them.
* EXPERIMENTAL
*/
-$wgSharedDB = null;
-
-# Database load balancer
-# This is a two-dimensional array, an array of server info structures
-# Fields are:
-# host: Host name
-# dbname: Default database name
-# user: DB user
-# password: DB password
-# type: "mysql" or "postgres"
-# load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
-# groupLoads: array of load ratios, the key is the query group name. A query may belong
-# to several groups, the most specific group defined here is used.
-#
-# flags: bit field
-# DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
-# DBO_DEBUG -- equivalent of $wgDebugDumpSql
-# DBO_TRX -- wrap entire request in a transaction
-# DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
-# DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
-#
-# max lag: (optional) Maximum replication lag before a slave will taken out of rotation
-# max threads: (optional) Maximum number of running threads
-#
-# These and any other user-defined properties will be assigned to the mLBInfo member
-# variable of the Database object.
-#
-# Leave at false to use the single-server variables above
+$wgSharedDB = null;
+$wgSharedPrefix = false; # Defaults to $wgDBprefix
+$wgSharedTables = array( 'user' );
+
+/**
+ * Database load balancer
+ * This is a two-dimensional array, an array of server info structures
+ * Fields are:
+ * host: Host name
+ * dbname: Default database name
+ * user: DB user
+ * password: DB password
+ * type: "mysql" or "postgres"
+ * load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
+ * groupLoads: array of load ratios, the key is the query group name. A query may belong
+ * to several groups, the most specific group defined here is used.
+ *
+ * flags: bit field
+ * DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
+ * DBO_DEBUG -- equivalent of $wgDebugDumpSql
+ * DBO_TRX -- wrap entire request in a transaction
+ * DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
+ * DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
+ *
+ * max lag: (optional) Maximum replication lag before a slave will taken out of rotation
+ * max threads: (optional) Maximum number of running threads
+ *
+ * These and any other user-defined properties will be assigned to the mLBInfo member
+ * variable of the Database object.
+ *
+ * Leave at false to use the single-server variables above. If you set this
+ * variable, the single-server variables will generally be ignored (except
+ * perhaps in some command-line scripts).
+ *
+ * The first server listed in this array (with key 0) will be the master. The
+ * rest of the servers will be slaves. To prevent writes to your slaves due to
+ * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
+ * slaves in my.cnf. You can set read_only mode at runtime using:
+ *
+ * SET @@read_only=1;
+ *
+ * Since the effect of writing to a slave is so damaging and difficult to clean
+ * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
+ * our masters, and then set read_only=0 on masters at runtime.
+ */
$wgDBservers = false;
+/**
+ * Load balancer factory configuration
+ * To set up a multi-master wiki farm, set the class here to something that
+ * can return a LoadBalancer with an appropriate master on a call to getMainLB().
+ * The class identified here is responsible for reading $wgDBservers,
+ * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
+ *
+ * The LBFactory_Multi class is provided for this purpose, please see
+ * includes/db/LBFactory_Multi.php for configuration information.
+ */
+$wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
+
/** How long to wait for a slave to catch up to the master */
$wgMasterWaitTimeout = 10;
$wgDBClusterTimeout = 10;
/**
- * wgDBminWordLen :
- * MySQL 3.x : used to discard words that MySQL will not return any results for
- * shorter values configure mysql directly.
- * MySQL 4.x : ignore it and configure mySQL
- * See: http://dev.mysql.com/doc/mysql/en/Fulltext_Fine-tuning.html
+ * Scale load balancer polling time so that under overload conditions, the database server
+ * receives a SHOW STATUS query at an average interval of this many microseconds
*/
-$wgDBminWordLen = 4;
+$wgDBAvgStatusPoll = 2000;
+
/** Set to true if using InnoDB tables */
$wgDBtransactions = false;
/** Set to true for compatibility with extensions that might be checking.
* account.
* Array numeric key => database name
*/
-$wgLocalDatabases = array();
+$wgLocalDatabases = array();
-/**
- * For multi-wiki clusters with multiple master servers; if an alternate
- * is listed for the requested database, a connection to it will be opened
- * instead of to the current wiki's regular master server when cross-wiki
- * data operations are done from here.
- *
- * Requires that the other server be accessible by network, with the same
- * username/password as the primary.
- *
- * eg $wgAlternateMaster['enwiki'] = 'ariel';
- */
-$wgAlternateMaster = array();
-
-/**
+/** @{
* Object cache settings
* See Defines.php for types
*/
$wgMainCacheType = CACHE_NONE;
$wgMessageCacheType = CACHE_ANYTHING;
$wgParserCacheType = CACHE_ANYTHING;
+/**@}*/
$wgParserCacheExpireTime = 86400;
$wgSessionsInMemcached = false;
-$wgLinkCacheMemcached = false; # Not fully tested
-/**
+/**@{
* Memcached-specific settings
* See docs/memcached.txt
*/
$wgUseMemCached = false;
-$wgMemCachedDebug = false; # Will be set to false in Setup.php, if the server isn't working
+$wgMemCachedDebug = false; ///< Will be set to false in Setup.php, if the server isn't working
$wgMemCachedServers = array( '127.0.0.1:11000' );
$wgMemCachedPersistent = false;
+/**@}*/
/**
* Directory for local copy of message cache, for use in addition to memcached
*/
$wgLocalMessageCacheSerialized = true;
-/**
- * Directory for compiled constant message array databases
- * WARNING: turning anything on will just break things, aaaaaah!!!!
- */
-$wgCachedMessageArrays = false;
-
# Language settings
#
/** Site language code, should be one of ./languages/Language(.*).php */
-$wgLanguageCode = 'en';
+$wgLanguageCode = 'en';
/**
* Some languages need different word forms, usually for different cases.
/** Hide interlanguage links from the sidebar */
$wgHideInterlanguageLinks = false;
+/** List of language names or overrides for default names in Names.php */
+$wgExtraLanguageNames = array();
/** We speak UTF-8 all the time now, unless some oddities happen */
$wgInputEncoding = 'UTF-8';
$wgOutputEncoding = 'UTF-8';
$wgEditEncoding = '';
-# Set this to eg 'ISO-8859-1' to perform character set
-# conversion when loading old revisions not marked with
-# "utf-8" flag. Use this when converting wiki to UTF-8
-# without the burdensome mass conversion of old text data.
-#
-# NOTE! This DOES NOT touch any fields other than old_text.
-# Titles, comments, user names, etc still must be converted
-# en masse in the database before continuing as a UTF-8 wiki.
+/**
+ * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
+ * For Unix-like operating systems, set this to to a locale that has a UTF-8
+ * character set. Only the character set is relevant.
+ */
+$wgShellLocale = 'en_US.utf8';
+
+/**
+ * Set this to eg 'ISO-8859-1' to perform character set
+ * conversion when loading old revisions not marked with
+ * "utf-8" flag. Use this when converting wiki to UTF-8
+ * without the burdensome mass conversion of old text data.
+ *
+ * NOTE! This DOES NOT touch any fields other than old_text.
+ * Titles, comments, user names, etc still must be converted
+ * en masse in the database before continuing as a UTF-8 wiki.
+ */
$wgLegacyEncoding = false;
/**
$wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
$wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
-# Permit other namespaces in addition to the w3.org default.
-# Use the prefix for the key and the namespace for the value. For
-# example:
-# $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
-# Normally we wouldn't have to define this in the root <html>
-# element, but IE needs it there in some circumstances.
+/**
+ * Permit other namespaces in addition to the w3.org default.
+ * Use the prefix for the key and the namespace for the value. For
+ * example:
+ * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
+ * Normally we wouldn't have to define this in the root <html>
+ * element, but IE needs it there in some circumstances.
+ */
$wgXhtmlNamespaces = array();
/** Enable to allow rewriting dates in page text.
/**
* Translation using MediaWiki: namespace.
- * This will increase load times by 25-60% unless memcached is installed.
* Interface messages will be loaded from the database.
*/
$wgUseDatabaseMessages = true;
*/
$wgMaxMsgCacheEntrySize = 10000;
-# Whether to enable language variant conversion.
+/**
+ * If true, serialized versions of the messages arrays will be
+ * read from the 'serialized' subdirectory if they are present.
+ * Set to false to always use the Messages files, regardless of
+ * whether they are up to date or not.
+ */
+$wgEnableSerializedMessages = true;
+
+/**
+ * Set to false if you are thorough system admin who always remembers to keep
+ * serialized files up to date to save few mtime calls.
+ */
+$wgCheckSerialized = true;
+
+/** Whether to enable language variant conversion. */
$wgDisableLangConversion = false;
-# Default variant code, if false, the default will be the language code
+/** Whether to enable language variant conversion for links. */
+$wgDisableTitleConversion = false;
+
+/** Default variant code, if false, the default will be the language code */
$wgDefaultLanguageVariant = false;
/**
*/
$wgLoginLanguageSelector = false;
-# Whether to use zhdaemon to perform Chinese text processing
-# zhdaemon is under developement, so normally you don't want to
-# use it unless for testing
+/**
+ * Whether to use zhdaemon to perform Chinese text processing
+ * zhdaemon is under developement, so normally you don't want to
+ * use it unless for testing
+ */
$wgUseZhdaemon = false;
$wgZhdaemonHost="localhost";
$wgZhdaemonPort=2004;
-/** Normally you can ignore this and it will be something
- like $wgMetaNamespace . "_talk". In some languages, you
- may want to set this manually for grammatical reasons.
- It is currently only respected by those languages
- where it might be relevant and where no automatic
- grammar converter exists.
-*/
-$wgMetaNamespaceTalk = false;
# Miscellaneous configuration settings
#
2 - wiki and global levels
3 - site levels
$wgInterwikiFallbackSite - if unable to resolve from cache
-*/
+ */
$wgInterwikiCache = false;
$wgInterwikiScopes = 3;
$wgInterwikiFallbackSite = 'wiki';
$wgShowIPinHeader = true; # For non-logged in users
-$wgMaxNameChars = 255; # Maximum number of bytes in username
-$wgMaxSigChars = 255; # Maximum number of Unicode characters in signature
+$wgMaxSigChars = 255; # Maximum number of Unicode characters in signature
$wgMaxArticleSize = 2048; # Maximum article size in kilobytes
+# Maximum number of bytes in username. You want to run the maintenance
+# script ./maintenancecheckUsernames.php once you have changed this value
+$wgMaxNameChars = 255;
+
+$wgMaxPPNodeCount = 1000000; # A complexity limit on template expansion
+
+/**
+ * Maximum recursion depth for templates within templates.
+ * The current parser adds two levels to the PHP call stack for each template,
+ * and xdebug limits the call stack to 100 by default. So this should hopefully
+ * stop the parser before it hits the xdebug limit.
+ */
+$wgMaxTemplateDepth = 40;
+$wgMaxPPExpandDepth = 40;
+
+/**
+ * If true, removes (substitutes) templates in "~~~~" signatures.
+ */
+$wgCleanSignatures = true;
$wgExtraSubtitle = '';
$wgSiteSupportPage = ''; # A page where you users can receive donations
+/**
+ * Set this to a string to put the wiki into read-only mode. The text will be
+ * used as an explanation to users.
+ *
+ * This prevents most write operations via the web interface. Cache updates may
+ * still be possible. To prevent database writes completely, use the read_only
+ * option in MySQL.
+ */
+$wgReadOnly = null;
+
/***
- * If this lock file exists, the wiki will be forced into read-only mode.
+ * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
* Its contents will be shown to users as part of the read-only warning
* message.
*/
-$wgReadOnlyFile = false; /// defaults to "{$wgUploadDirectory}/lock_yBgMBwiR";
+$wgReadOnlyFile = false; ///< defaults to "{$wgUploadDirectory}/lock_yBgMBwiR";
/**
+ * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
* The debug log file should be not be publicly accessible if it is used, as it
- * may contain private data. */
+ * may contain private data.
+ */
$wgDebugLogFile = '';
-/**#@+
- * @global bool
+/**
+ * Prefix for debug log lines
+ */
+$wgDebugLogPrefix = '';
+
+/**
+ * If true, instead of redirecting, show a page with a link to the redirect
+ * destination. This allows for the inspection of PHP error messages, and easy
+ * resubmission of form data. For developer use only.
*/
$wgDebugRedirects = false;
-$wgDebugRawPage = false; # Avoid overlapping debug entries by leaving out CSS
+/**
+ * If true, log debugging data from action=raw.
+ * This is normally false to avoid overlapping debug entries due to gen=css and
+ * gen=js requests.
+ */
+$wgDebugRawPage = false;
+
+/**
+ * Send debug data to an HTML comment in the output.
+ *
+ * This may occasionally be useful when supporting a non-technical end-user. It's
+ * more secure than exposing the debug log file to the web, since the output only
+ * contains private data for the current user. But it's not ideal for development
+ * use since data is lost on fatal errors and redirects.
+ */
$wgDebugComments = false;
-$wgReadOnly = null;
+
+/** Does nothing. Obsolete? */
$wgLogQueries = false;
/**
*/
$wgDebugLogGroups = array();
+/**
+ * Display debug data at the bottom of the main content area.
+ *
+ * Useful for developers and technical users trying to working on a closed wiki.
+ */
+$wgShowDebug = false;
+
+/**
+ * Show the contents of $wgHooks in Special:Version
+ */
+$wgSpecialVersionShowHooks = false;
+
/**
* Whether to show "we're sorry, but there has been a database error" pages.
* Displaying errors aids in debugging, but may display information useful
* same options.
*
* This can provide a significant speedup for medium to large pages,
- * so you probably want to keep it on.
+ * so you probably want to keep it on. Extensions that conflict with the
+ * parser cache should disable the cache on a per-page basis instead.
*/
$wgEnableParserCache = true;
+/**
+ * Append a configured value to the parser cache and the sitenotice key so
+ * that they can be kept separate for some class of activity.
+ */
+$wgRenderHashAppend = '';
+
/**
* If on, the sidebar navigation links are cached for users with the
* current language set. This can save a touch of load on a busy site
*/
$wgEnableSidebarCache = false;
+/**
+ * Expiry time for the sidebar cache, in seconds
+ */
+$wgSidebarCacheExpiry = 86400;
+
/**
* Under which condition should a page in the main namespace be counted
* as a valid article? If $wgUseCommaCount is set to true, it will be
*
* Retroactively changing this variable will not affect
* the existing count (cf. maintenance/recount.sql).
-*/
+ */
$wgUseCommaCount = false;
-/**#@-*/
-
/**
* wgHitcounterUpdateFreq sets how often page counters should be updated, higher
* values are easier on the database. A value of 1 causes the counters to be
* updated on every hit, any higher value n cause them to update *on average*
* every n hits. Should be set to either 1 or something largish, eg 1000, for
* maximum efficiency.
-*/
+ */
$wgHitcounterUpdateFreq = 1;
# Basic user rights and block settings
$wgSysopUserBans = true; # Allow sysops to ban logged-in users
$wgSysopRangeBans = true; # Allow sysops to ban IP ranges
$wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
-$wgBlockAllowsUTEdit = false; # Blocks allow users to edit their own user talk page
+$wgBlockAllowsUTEdit = false; # Default setting for option on block form to allow self talkpage editing whilst blocked
$wgSysopEmailBans = true; # Allow sysops to ban users from accessing Emailuser
# Pages anonymous user may see as an array, e.g.:
-# array ( "Main Page", "Special:Userlogin", "Wikipedia:Help");
+# array ( "Main Page", "Wikipedia:Help");
+# Special:Userlogin and Special:Resetpass are always whitelisted.
# NOTE: This will only work if $wgGroupPermissions['*']['read']
# is false -- see below. Otherwise, ALL pages are accessible,
# regardless of this setting.
# directory name unguessable, or use .htaccess to protect it.
$wgWhitelistRead = false;
-/**
+/**
* Should editors be required to have a validated e-mail
* address before being allowed to edit?
*/
$wgGroupPermissions = array();
// Implicit group for all visitors
-$wgGroupPermissions['*' ]['createaccount'] = true;
-$wgGroupPermissions['*' ]['read'] = true;
-$wgGroupPermissions['*' ]['edit'] = true;
-$wgGroupPermissions['*' ]['createpage'] = true;
-$wgGroupPermissions['*' ]['createtalk'] = true;
+$wgGroupPermissions['*']['createaccount'] = true;
+$wgGroupPermissions['*']['read'] = true;
+$wgGroupPermissions['*']['edit'] = true;
+$wgGroupPermissions['*']['createpage'] = true;
+$wgGroupPermissions['*']['createtalk'] = true;
+$wgGroupPermissions['*']['writeapi'] = true;
// Implicit group for all logged-in accounts
-$wgGroupPermissions['user' ]['move'] = true;
-$wgGroupPermissions['user' ]['read'] = true;
-$wgGroupPermissions['user' ]['edit'] = true;
-$wgGroupPermissions['user' ]['createpage'] = true;
-$wgGroupPermissions['user' ]['createtalk'] = true;
-$wgGroupPermissions['user' ]['upload'] = true;
-$wgGroupPermissions['user' ]['reupload'] = true;
-$wgGroupPermissions['user' ]['reupload-shared'] = true;
-$wgGroupPermissions['user' ]['minoredit'] = true;
-$wgGroupPermissions['user' ]['purge'] = true; // can use ?action=purge without clicking "ok"
+$wgGroupPermissions['user']['move'] = true;
+$wgGroupPermissions['user']['move-subpages'] = true;
+$wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
+//$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
+$wgGroupPermissions['user']['read'] = true;
+$wgGroupPermissions['user']['edit'] = true;
+$wgGroupPermissions['user']['createpage'] = true;
+$wgGroupPermissions['user']['createtalk'] = true;
+$wgGroupPermissions['user']['writeapi'] = true;
+$wgGroupPermissions['user']['upload'] = true;
+$wgGroupPermissions['user']['reupload'] = true;
+$wgGroupPermissions['user']['reupload-shared'] = true;
+$wgGroupPermissions['user']['minoredit'] = true;
+$wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
// Implicit group for accounts that pass $wgAutoConfirmAge
$wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
-// Implicit group for accounts with confirmed email addresses
-// This has little use when email address confirmation is off
-$wgGroupPermissions['emailconfirmed']['emailconfirmed'] = true;
-
// Users with bot privilege can have their edits hidden
// from various log pages by default
-$wgGroupPermissions['bot' ]['bot'] = true;
-$wgGroupPermissions['bot' ]['autoconfirmed'] = true;
-$wgGroupPermissions['bot' ]['nominornewtalk'] = true;
-$wgGroupPermissions['bot' ]['autopatrol'] = true;
+$wgGroupPermissions['bot']['bot'] = true;
+$wgGroupPermissions['bot']['autoconfirmed'] = true;
+$wgGroupPermissions['bot']['nominornewtalk'] = true;
+$wgGroupPermissions['bot']['autopatrol'] = true;
+$wgGroupPermissions['bot']['suppressredirect'] = true;
+$wgGroupPermissions['bot']['apihighlimits'] = true;
+$wgGroupPermissions['bot']['writeapi'] = true;
+#$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
// Most extra permission abilities go to this group
-$wgGroupPermissions['sysop']['block'] = true;
-$wgGroupPermissions['sysop']['createaccount'] = true;
-$wgGroupPermissions['sysop']['delete'] = true;
-$wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
-$wgGroupPermissions['sysop']['editinterface'] = true;
-$wgGroupPermissions['sysop']['import'] = true;
-$wgGroupPermissions['sysop']['importupload'] = true;
-$wgGroupPermissions['sysop']['move'] = true;
-$wgGroupPermissions['sysop']['patrol'] = true;
-$wgGroupPermissions['sysop']['autopatrol'] = true;
-$wgGroupPermissions['sysop']['protect'] = true;
-$wgGroupPermissions['sysop']['proxyunbannable'] = true;
-$wgGroupPermissions['sysop']['rollback'] = true;
-$wgGroupPermissions['sysop']['trackback'] = true;
-$wgGroupPermissions['sysop']['upload'] = true;
-$wgGroupPermissions['sysop']['reupload'] = true;
-$wgGroupPermissions['sysop']['reupload-shared'] = true;
-$wgGroupPermissions['sysop']['unwatchedpages'] = true;
-$wgGroupPermissions['sysop']['autoconfirmed'] = true;
-$wgGroupPermissions['sysop']['upload_by_url'] = true;
-$wgGroupPermissions['sysop']['ipblock-exempt'] = true;
-$wgGroupPermissions['sysop']['blockemail'] = true;
+$wgGroupPermissions['sysop']['block'] = true;
+$wgGroupPermissions['sysop']['createaccount'] = true;
+$wgGroupPermissions['sysop']['delete'] = true;
+$wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
+$wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
+$wgGroupPermissions['sysop']['undelete'] = true;
+$wgGroupPermissions['sysop']['editinterface'] = true;
+$wgGroupPermissions['sysop']['editusercssjs'] = true;
+$wgGroupPermissions['sysop']['import'] = true;
+$wgGroupPermissions['sysop']['importupload'] = true;
+$wgGroupPermissions['sysop']['move'] = true;
+$wgGroupPermissions['sysop']['move-subpages'] = true;
+$wgGroupPermissions['sysop']['move-rootuserpages'] = true;
+$wgGroupPermissions['sysop']['patrol'] = true;
+$wgGroupPermissions['sysop']['autopatrol'] = true;
+$wgGroupPermissions['sysop']['protect'] = true;
+$wgGroupPermissions['sysop']['proxyunbannable'] = true;
+$wgGroupPermissions['sysop']['rollback'] = true;
+$wgGroupPermissions['sysop']['trackback'] = true;
+$wgGroupPermissions['sysop']['upload'] = true;
+$wgGroupPermissions['sysop']['reupload'] = true;
+$wgGroupPermissions['sysop']['reupload-shared'] = true;
+$wgGroupPermissions['sysop']['unwatchedpages'] = true;
+$wgGroupPermissions['sysop']['autoconfirmed'] = true;
+$wgGroupPermissions['sysop']['upload_by_url'] = true;
+$wgGroupPermissions['sysop']['ipblock-exempt'] = true;
+$wgGroupPermissions['sysop']['blockemail'] = true;
+$wgGroupPermissions['sysop']['markbotedits'] = true;
+$wgGroupPermissions['sysop']['apihighlimits'] = true;
+$wgGroupPermissions['sysop']['browsearchive'] = true;
+$wgGroupPermissions['sysop']['noratelimit'] = true;
+$wgGroupPermissions['sysop']['movefile'] = true;
+#$wgGroupPermissions['sysop']['mergehistory'] = true;
// Permission to change users' group assignments
-$wgGroupPermissions['bureaucrat']['userrights'] = true;
-
-// Experimental permissions, not ready for production use
-//$wgGroupPermissions['sysop']['deleterevision'] = true;
-//$wgGroupPermissions['bureaucrat']['hiderevision'] = true;
+$wgGroupPermissions['bureaucrat']['userrights'] = true;
+$wgGroupPermissions['bureaucrat']['noratelimit'] = true;
+// Permission to change users' groups assignments across wikis
+#$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
+// Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
+#$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
+
+#$wgGroupPermissions['sysop']['deleterevision'] = true;
+// To hide usernames from users and Sysops
+#$wgGroupPermissions['suppress']['hideuser'] = true;
+// To hide revisions/log items from users and Sysops
+#$wgGroupPermissions['suppress']['suppressrevision'] = true;
+// For private suppression log access
+#$wgGroupPermissions['suppress']['suppressionlog'] = true;
/**
* The developer group is deprecated, but can be activated if need be
*/
# $wgGroupPermissions['developer']['siteadmin'] = true;
+
+/**
+ * Implicit groups, aren't shown on Special:Listusers or somewhere else
+ */
+$wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
+
+/**
+ * A map of group names that the user is in, to group names that those users
+ * are allowed to add or revoke.
+ *
+ * Setting the list of groups to add or revoke to true is equivalent to "any group".
+ *
+ * For example, to allow sysops to add themselves to the "bot" group:
+ *
+ * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
+ *
+ * Implicit groups may be used for the source group, for instance:
+ *
+ * $wgGroupsRemoveFromSelf = array( '*' => true );
+ *
+ * This allows users in the '*' group (i.e. any user) to remove themselves from
+ * any group that they happen to be in.
+ *
+ */
+$wgGroupsAddToSelf = array();
+$wgGroupsRemoveFromSelf = array();
+
/**
* Set of available actions that can be restricted via action=protect
* You probably shouldn't change this.
- * Translated trough restriction-* messages.
+ * Translated through restriction-* messages.
*/
$wgRestrictionTypes = array( 'edit', 'move' );
* Set the minimum permissions required to edit pages in each
* namespace. If you list more than one permission, a user must
* have all of them to edit pages in that namespace.
+ *
+ * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
*/
$wgNamespaceProtection = array();
-$wgNamespaceProtection[ NS_MEDIAWIKI ] = array( 'editinterface' );
/**
-* Pages in namespaces in this array can not be used as templates.
-* Elements must be numeric namespace ids.
-* Among other things, this may be useful to enforce read-restrictions
-* which may otherwise be bypassed by using the template machanism.
-*/
+ * Pages in namespaces in this array can not be used as templates.
+ * Elements must be numeric namespace ids.
+ * Among other things, this may be useful to enforce read-restrictions
+ * which may otherwise be bypassed by using the template machanism.
+ */
$wgNonincludableNamespaces = array();
/**
$wgAutoConfirmCount = 0;
//$wgAutoConfirmCount = 50;
+/**
+ * Automatically add a usergroup to any user who matches certain conditions.
+ * The format is
+ * array( '&' or '|' or '^', cond1, cond2, ... )
+ * where cond1, cond2, ... are themselves conditions; *OR*
+ * APCOND_EMAILCONFIRMED, *OR*
+ * array( APCOND_EMAILCONFIRMED ), *OR*
+ * array( APCOND_EDITCOUNT, number of edits ), *OR*
+ * array( APCOND_AGE, seconds since registration ), *OR*
+ * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
+ * array( APCOND_ISIP, ip ), *OR*
+ * array( APCOND_IPINRANGE, range ), *OR*
+ * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
+ * similar constructs defined by extensions.
+ *
+ * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
+ * user who has provided an e-mail address.
+ */
+$wgAutopromote = array(
+ 'autoconfirmed' => array( '&',
+ array( APCOND_EDITCOUNT, &$wgAutoConfirmCount ),
+ array( APCOND_AGE, &$wgAutoConfirmAge ),
+ ),
+);
+
/**
* These settings can be used to give finer control over who can assign which
* groups at Special:Userrights. Example configuration:
*
* // Bureaucrat can add any group
- * $wgAddGroups['bureaucrat'] = true;
+ * $wgAddGroups['bureaucrat'] = true;
* // Bureaucrats can only remove bots and sysops
- * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
+ * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
* // Sysops can make bots
- * $wgAddGroups['sysop'] = array( 'bot' );
+ * $wgAddGroups['sysop'] = array( 'bot' );
* // Sysops can disable other sysops in an emergency, and disable bots
- * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
+ * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
+ */
+$wgAddGroups = array();
+$wgRemoveGroups = array();
+
+/**
+ * A list of available rights, in addition to the ones defined by the core.
+ * For extensions only.
+ */
+$wgAvailableRights = array();
+
+/**
+ * Optional to restrict deletion of pages with higher revision counts
+ * to users with the 'bigdelete' permission. (Default given to sysops.)
*/
-$wgAddGroups = $wgRemoveGroups = array();
+$wgDeleteRevisionsLimit = 0;
+
+/**
+ * Used to figure out if a user is "active" or not. User::isActiveEditor()
+ * sees if a user has made at least $wgActiveUserEditCount number of edits
+ * within the last $wgActiveUserDays days.
+ */
+$wgActiveUserEditCount = 30;
+$wgActiveUserDays = 30;
# Proxy scanner settings
#
* to ensure that client-side caches don't keep obsolete copies of global
* styles.
*/
-$wgStyleVersion = '97';
+$wgStyleVersion = '207';
# Server-side caching:
$wgUseFileCache = false;
/** Directory where the cached page will be saved */
-$wgFileCacheDirectory = false; /// defaults to "{$wgUploadDirectory}/cache";
+$wgFileCacheDirectory = false; ///< defaults to "{$wgUploadDirectory}/cache";
/**
* When using the file cache, we can store the cached HTML gzipped to save disk
$wgEnotifImpersonal = false;
-# Maximum number of users to mail at once when using impersonal mail. Should
+# Maximum number of users to mail at once when using impersonal mail. Should
# match the limit on your mail server.
$wgEnotifMaxRecips = 500;
# Send mails via the job queue.
$wgEnotifUseJobQ = false;
-/**
+# Use real name instead of username in e-mail "from" field
+$wgEnotifUseRealName = false;
+
+/**
* Array of usernames who will be sent a notification email for every change which occurs on a wiki
*/
-$wgUsersNotifedOnAllChanges = array();
+$wgUsersNotifiedOnAllChanges = array();
/** Show watching users in recent changes, watchlist and page history views */
$wgRCShowWatchingUsers = false; # UPO
/**
* If the difference between the character counts of the text
- * before and after the edit is below that value, the value will be
+ * before and after the edit is below that value, the value will be
* highlighted on the RC page.
*/
-$wgRCChangedSizeThreshold = -500;
+$wgRCChangedSizeThreshold = 500;
/**
* Show "Updated (since my last visit)" marker in RC view, watchlist and history
* view for watched pages with new changes */
$wgShowUpdatedMarker = true;
-$wgCookieExpiration = 2592000;
+/**
+ * Default cookie expiration time. Setting to 0 makes all cookies session-only.
+ */
+$wgCookieExpiration = 30*86400;
/** Clock skew or the one-second resolution of time() can occasionally cause cache
* problems when the user requests two pages within a short period of time. This
$wgSquidMaxage = 18000;
/**
- * A list of proxy servers (ips if possible) to purge on changes don't specify
- * ports here (80 is default). When mediawiki is running behind a proxy, its
- * address should be listed in $wgSquidServers otherwise mediawiki won't rely
- * on the X-FORWARDED-FOR header to determine the user IP address and
- * all users will appear to come from the proxy IP address. Don't use domain
- * names here, only IP adresses.
+ * Default maximum age for raw CSS/JS accesses
+ */
+$wgForcedRawSMaxage = 300;
+
+/**
+ * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
+ *
+ * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
+ * headers sent/modified from these proxies when obtaining the remote IP address
+ *
+ * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
*/
-# $wgSquidServers = array('127.0.0.1');
$wgSquidServers = array();
+
+/**
+ * As above, except these servers aren't purged on page changes; use to set a
+ * list of trusted proxies, etc.
+ */
$wgSquidServersNoPurge = array();
/** Maximum number of titles to purge in any one client operation */
# $wgHTCPMulticastAddress = "224.0.0.85";
$wgHTCPMulticastAddress = false;
+/** Should forwarded Private IPs be accepted? */
+$wgUsePrivateIPs = false;
+
# Cookie settings:
#
/**
$wgCookieSecure = ($wgProto == 'https');
$wgDisableCookieCheck = false;
+/**
+ * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of
+ * using the database name.
+ */
+$wgCookiePrefix = false;
+
+/**
+ * Set authentication cookies to HttpOnly to prevent access by JavaScript,
+ * in browsers that support this feature. This can mitigates some classes of
+ * XSS attack.
+ *
+ * Only supported on PHP 5.2 or higher.
+ */
+$wgCookieHttpOnly = version_compare("5.2", PHP_VERSION, "<");
+
+/**
+ * If the requesting browser matches a regex in this blacklist, we won't
+ * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
+ */
+$wgHttpOnlyBlacklist = array(
+ // Internet Explorer for Mac; sometimes the cookies work, sometimes
+ // they don't. It's difficult to predict, as combinations of path
+ // and expiration options affect its parsing.
+ '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
+);
+
+/** A list of cookies that vary the cache (for use by extensions) */
+$wgCacheVaryCookies = array();
+
/** Override to customise the session name */
$wgSessionName = false;
/** If the above is false, you can specify an exception here. Image URLs
* that start with this string are then rendered, while all others are not.
* You can use this to set up a trusted, simple repository of images.
+ * You may also specify an array of strings to allow multiple sites
*
- * Example:
+ * Examples:
* $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
+ * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
*/
$wgAllowExternalImagesFrom = '';
+/** If $wgAllowExternalImages is false, you can allow an on-wiki
+ * whitelist of regular expression fragments to match the image URL
+ * against. If the image matches one of the regular expression fragments,
+ * The image will be displayed.
+ *
+ * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
+ * Or false to disable it
+ */
+$wgEnableImageWhitelist = true;
+
+/** Allows to move images and other media files */
+$wgAllowImageMoving = true;
+
/** Disable database-intensive features */
$wgMiserMode = false;
/** Disable all query pages if miser mode is on, not just some */
*/
$wgJobClasses = array(
'refreshLinks' => 'RefreshLinksJob',
+ 'refreshLinks2' => 'RefreshLinksJob2',
'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
'sendMail' => 'EmaillingJob',
'enotifNotify' => 'EnotifNotifyJob',
+ 'fixDoubleRedirect' => 'DoubleRedirectJob',
+);
+
+/**
+ * Additional functions to be performed with updateSpecialPages.
+ * Expensive Querypages are already updated.
+ */
+$wgSpecialPageCacheUpdates = array(
+ 'Statistics' => array('SiteStatsUpdate','cacheUpdate')
);
/**
/** Lots of debugging output from SquidUpdate.php */
$wgDebugSquid = false;
+/*
+ * Destination for wfIncrStats() data...
+ * 'cache' to go into the system cache, if enabled (memcached)
+ * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
+ * false to disable
+ */
+$wgStatsMethod = 'cache';
+
/** Whereas to count the number of time an article is viewed.
* Does not work if pages are cached (for example with squid).
*/
$wgDisableTextSearch = false;
$wgDisableSearchContext = false;
+
+
+/**
+ * Set to true to have nicer highligted text in search results,
+ * by default off due to execution overhead
+ */
+$wgAdvancedSearchHighlighting = false;
+
+/**
+ * Regexp to match word boundaries, defaults for non-CJK languages
+ * should be empty for CJK since the words are not separate
+ */
+$wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION, "<")? '[\p{Z}\p{P}\p{C}]'
+ : '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround
+
+/**
+ * Template for OpenSearch suggestions, defaults to API action=opensearch
+ *
+ * Sites with heavy load would tipically have these point to a custom
+ * PHP wrapper to avoid firing up mediawiki for every keystroke
+ *
+ * Placeholders: {searchTerms}
+ *
+ */
+$wgOpenSearchTemplate = false;
+
+/**
+ * Enable suggestions while typing in search boxes
+ * (results are passed around in OpenSearch format)
+ */
+$wgEnableMWSuggest = false;
+
+/**
+ * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
+ *
+ * Placeholders: {searchTerms}, {namespaces}, {dbname}
+ *
+ */
+$wgMWSuggestTemplate = false;
+
/**
* If you've disabled search semi-permanently, this also disables updates to the
* table. If you ever re-enable, be sure to rebuild the search table.
*/
$wgDiff3 = '/usr/bin/diff3';
+/**
+ * Path to the GNU diff utility.
+ */
+$wgDiff = '/usr/bin/diff';
+
/**
* We can also compress text stored in the 'text' table. If this is set on, new
* revisions will be compressed on page save if zlib support is available. Any
'application/x-php', 'text/x-php',
# Other types that may be interpreted by some servers
'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
+ # Client-side hazards on Internet Explorer
+ 'text/scriptlet', 'application/x-msdownload',
# Windows metafile, client-side vulnerability on some systems
- 'application/x-msmetafile'
+ 'application/x-msmetafile',
+ # A ZIP file may be a valid Java archive containing an applet which exploits the
+ # same-origin policy to steal cookies
+ 'application/zip',
);
/** This is a flag to determine whether or not to check file extensions on upload. */
*/
$wgStrictFileExtensions = true;
-/** Warn if uploaded files are larger than this (in bytes)*/
-$wgUploadSizeWarning = 150 * 1024;
+/** Warn if uploaded files are larger than this (in bytes), or false to disable*/
+$wgUploadSizeWarning = false;
/** For compatibility with old installations set to false */
$wgPasswordSalt = true;
NS_USER => true,
NS_USER_TALK => true,
NS_PROJECT_TALK => true,
- NS_IMAGE_TALK => true,
+ NS_FILE_TALK => true,
NS_MEDIAWIKI_TALK => true,
NS_TEMPLATE_TALK => true,
NS_HELP_TALK => true,
NS_MAIN => true,
);
+/**
+ * Additional namespaces to those in $wgNamespacesToBeSearchedDefault that
+ * will be added to default search for "project" page inclusive searches
+ *
+ * Same format as $wgNamespacesToBeSearchedDefault
+ */
+$wgNamespacesToBeSearchedProject = array(
+ NS_USER => true,
+ NS_PROJECT => true,
+ NS_HELP => true,
+ NS_CATEGORY => true,
+);
+
+$wgUseOldSearchUI = true; // temp testing variable
+
/**
* Site notice shown at the top of each page
*
# Images settings
#
-/**
+/**
* Plugins for media file type handling.
* Each entry in the array maps a MIME type to a class name
*/
'image/jpeg' => 'BitmapHandler',
'image/png' => 'BitmapHandler',
'image/gif' => 'BitmapHandler',
+ 'image/tiff' => 'TiffHandler',
'image/x-ms-bmp' => 'BmpHandler',
- 'image/svg+xml' => 'SvgHandler',
- 'image/svg' => 'SvgHandler',
- 'image/vnd.djvu' => 'DjVuHandler',
+ 'image/x-bmp' => 'BmpHandler',
+ 'image/svg+xml' => 'SvgHandler', // official
+ 'image/svg' => 'SvgHandler', // compat
+ 'image/vnd.djvu' => 'DjVuHandler', // official
+ 'image/x.djvu' => 'DjVuHandler', // compat
+ 'image/x-djvu' => 'DjVuHandler', // compat
);
/** Reduction in linear dimensions below which sharpening will be enabled */
$wgSharpenReductionThreshold = 0.85;
+/**
+ * Temporary directory used for ImageMagick. The directory must exist. Leave
+ * this set to false to let ImageMagick decide for itself.
+ */
+$wgImageMagickTempDir = false;
+
/**
* Use another resizing converter, e.g. GraphicMagick
* %s will be replaced with the source path, %d with the destination
#
# An external program is required to perform this conversion:
$wgSVGConverters = array(
- 'ImageMagick' => '$path/convert -background white -geometry $width $input PNG:$output',
+ 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
'rsvg' => '$path/rsvg -w$width -h$height $input $output',
+ 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
);
/** Pick one of the above */
$wgSVGConverter = 'ImageMagick';
/** If not in the executable PATH, specify */
$wgSVGConverterPath = '';
/** Don't scale a SVG larger than this */
-$wgSVGMaxSize = 1024;
+$wgSVGMaxSize = 2048;
/**
* Don't thumbnail an image if it will use too much working memory
* Default is 50 MB if decompressed to RGBA form, which corresponds to
* 12.5 million pixels or 3500x3500
*/
$wgMaxImageArea = 1.25e7;
+/**
+ * Force thumbnailing of animated GIFs above this size to a single
+ * frame instead of an animated thumbnail. ImageMagick seems to
+ * get real unhappy and doesn't play well with resource limits. :P
+ * Defaulting to 1 megapixel (1000x1000)
+ */
+$wgMaxAnimatedGifArea = 1.0e6;
+/**
+ * Browsers don't support TIFF inline generally...
+ * For inline display, we need to convert to PNG or JPEG.
+ * Note scaling should work with ImageMagick, but may not with GD scaling.
+ * // PNG is lossless, but inefficient for photos
+ * $wgTiffThumbnailType = array( 'png', 'image/png' );
+ * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
+ * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
+ */
+$wgTiffThumbnailType = false;
/**
* If rendered thumbnail files are older than this timestamp, they
* will be rerendered on demand as if the file didn't already exist.
$wgIgnoreImageErrors = false;
/**
- * Allow thumbnail rendering on page view. If this is false, a valid
- * thumbnail URL is still output, but no file will be created at
- * the target location. This may save some time if you have a
- * thumb.php or 404 handler set up which is faster than the regular
- * webserver(s).
+ * Allow thumbnail rendering on page view. If this is false, a valid
+ * thumbnail URL is still output, but no file will be created at
+ * the target location. This may save some time if you have a
+ * thumb.php or 404 handler set up which is faster than the regular
+ * webserver(s).
*/
$wgGenerateThumbnailOnParse = true;
-/** Obsolete, always true, kept for compatibility with extensions */
-$wgUseImageResize = true;
-
+/** Whether or not to use image resizing */
+$wgUseImageResize = true;
/** Set $wgCommandLineMode if it's not set already, to avoid notices */
if( !isset( $wgCommandLineMode ) ) {
*/
$wgRCMaxAge = 7 * 24 * 3600;
+/**
+ * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers higher than what will be stored.
+ * Note that this is disabled by default because we sometimes do have RC data which is beyond the limit
+ * for some reason, and some users may use the high numbers to display that data which is still there.
+ */
+$wgRCFilterByAge = false;
+
+/**
+ * List of Days and Limits options to list in the Special:Recentchanges and Special:Recentchangeslinked pages.
+ */
+$wgRCLinkLimits = array( 50, 100, 250, 500 );
+$wgRCLinkDays = array( 1, 3, 7, 14, 30 );
-# Send RC updates via UDP
+/**
+ * Send recent changes updates via UDP. The updates will be formatted for IRC.
+ * Set this to the IP address of the receiver.
+ */
$wgRC2UDPAddress = false;
+
+/**
+ * Port number for RC updates
+ */
$wgRC2UDPPort = false;
+
+/**
+ * Prefix to prepend to each UDP packet.
+ * This can be used to identify the wiki. A script is available called
+ * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
+ * tab to identify the IRC channel to send the log line to.
+ */
$wgRC2UDPPrefix = '';
+/**
+ * If this is set to true, $wgLocalInterwiki will be prepended to links in the
+ * IRC feed. If this is set to a string, that string will be used as the prefix.
+ */
+$wgRC2UDPInterwikiPrefix = false;
+
+/**
+ * Set to true to omit "bot" edits (by users with the bot permission) from the
+ * UDP feed.
+ */
+$wgRC2UDPOmitBots = false;
+
+/**
+ * Enable user search in Special:Newpages
+ * This is really a temporary hack around an index install bug on some Wikipedias.
+ * Kill it once fixed.
+ */
+$wgEnableNewpagesUserFilter = true;
+
+/**
+ * Whether to use metadata edition
+ * This will put categories, language links and allowed templates in a separate text box
+ * while editing pages
+ * EXPERIMENTAL
+ */
+$wgUseMetadataEdit = false;
+/** Full name (including namespace) of the page containing templates names that will be allowed as metadata */
+$wgMetadataWhitelist = '';
+
#
# Copyright and credits settings
#
$wgExportAllowListContributors = false ;
+/**
+ * If non-zero, Special:Export accepts a "pagelink-depth" parameter
+ * up to this specified level, which will cause it to include all
+ * pages linked to from the pages you specify. Since this number
+ * can become *insanely large* and could easily break your wiki,
+ * it's disabled by default for now.
+ *
+ * There's a HARD CODED limit of 5 levels of recursion to prevent a
+ * crazy-big export from being done by someone setting the depth
+ * number too high. In other words, last resort safety net.
+ */
+$wgExportMaxLinkDepth = 0;
+
+/**
+ * Whether to allow the "export all pages in namespace" option
+ */
+$wgExportFromNamespaces = false;
+
+/**
+ * Edits matching these regular expressions in body text
+ * will be recognised as spam and rejected automatically.
+ *
+ * There's no administrator override on-wiki, so be careful what you set. :)
+ * May be an array of regexes or a single string for backwards compatibility.
+ *
+ * See http://en.wikipedia.org/wiki/Regular_expression
+ */
+$wgSpamRegex = array();
+
+/** Same as the above except for edit summaries */
+$wgSummarySpamRegex = array();
-/** Text matching this regular expression will be recognised as spam
- * See http://en.wikipedia.org/wiki/Regular_expression */
-$wgSpamRegex = false;
/** Similarly you can get a function to do the job. The function will be given
* the following args:
* - a Title object for the article the edit is made on
$wgTidyBin = 'tidy';
$wgTidyConf = $IP.'/includes/tidy.conf';
$wgTidyOpts = '';
-$wgTidyInternal = function_exists( 'tidy_load_config' );
+$wgTidyInternal = extension_loaded( 'tidy' );
+
+/**
+ * Put tidy warnings in HTML comments
+ * Only works for internal tidy.
+ */
+$wgDebugTidy = false;
+
+/**
+ * Validate the overall output using tidy and refuse
+ * to display the page if it's not valid.
+ */
+$wgValidateAllHtml = false;
/** See list of skins and their symbolic names in languages/Language.php */
$wgDefaultSkin = 'monobook';
+/** Should we allow the user's to select their own skin that will override the default? */
+$wgAllowUserSkin = true;
+
+/**
+ * Optionally, we can specify a stylesheet to use for media="handheld".
+ * This is recognized by some, but not all, handheld/mobile/PDA browsers.
+ * If left empty, compliant handheld browsers won't pick up the skin
+ * stylesheet, which is specified for 'screen' media.
+ *
+ * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
+ * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
+ *
+ * Will also be switched in when 'handheld=yes' is added to the URL, like
+ * the 'printable=yes' mode for print media.
+ */
+$wgHandheldStyle = false;
+
+/**
+ * If set, 'screen' and 'handheld' media specifiers for stylesheets are
+ * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
+ * which doesn't recognize 'handheld' but does support media queries on its
+ * screen size.
+ *
+ * Consider only using this if you have a *really good* handheld stylesheet,
+ * as iPhone users won't have any way to disable it and use the "grown-up"
+ * styles instead.
+ */
+$wgHandheldForIPhone = false;
+
/**
* Settings added to this array will override the default globals for the user
* preferences used by anonymous visitors and newly created accounts.
* $wgDefaultUserOptions ['editsection'] = 0;
*
*/
-$wgDefaultUserOptions = array(
- 'quickbar' => 1,
- 'underline' => 2,
- 'cols' => 80,
- 'rows' => 25,
- 'searchlimit' => 20,
- 'contextlines' => 5,
- 'contextchars' => 50,
- 'skin' => false,
- 'math' => 1,
- 'rcdays' => 7,
- 'rclimit' => 50,
- 'wllimit' => 250,
- 'highlightbroken' => 1,
- 'stubthreshold' => 0,
- 'previewontop' => 1,
- 'editsection' => 1,
- 'editsectiononrightclick'=> 0,
- 'showtoc' => 1,
- 'showtoolbar' => 1,
- 'date' => 'default',
- 'imagesize' => 2,
- 'thumbsize' => 2,
- 'rememberpassword' => 0,
- 'enotifwatchlistpages' => 0,
- 'enotifusertalkpages' => 1,
- 'enotifminoredits' => 0,
- 'enotifrevealaddr' => 0,
- 'shownumberswatching' => 1,
- 'fancysig' => 0,
- 'externaleditor' => 0,
- 'externaldiff' => 0,
- 'showjumplinks' => 1,
- 'numberheadings' => 0,
- 'uselivepreview' => 0,
- 'watchlistdays' => 3.0,
+$wgDefaultUserOptions = array(
+ 'quickbar' => 1,
+ 'underline' => 2,
+ 'cols' => 80,
+ 'rows' => 25,
+ 'searchlimit' => 20,
+ 'contextlines' => 5,
+ 'contextchars' => 50,
+ 'disablesuggest' => 0,
+ 'skin' => false,
+ 'math' => 1,
+ 'usenewrc' => 0,
+ 'rcdays' => 7,
+ 'rclimit' => 50,
+ 'wllimit' => 250,
+ 'hideminor' => 0,
+ 'hidepatrolled' => 0,
+ 'newpageshidepatrolled' => 0,
+ 'highlightbroken' => 1,
+ 'stubthreshold' => 0,
+ 'previewontop' => 1,
+ 'previewonfirst' => 0,
+ 'editsection' => 1,
+ 'editsectiononrightclick' => 0,
+ 'editondblclick' => 0,
+ 'editwidth' => 0,
+ 'showtoc' => 1,
+ 'showtoolbar' => 1,
+ 'minordefault' => 0,
+ 'date' => 'default',
+ 'imagesize' => 2,
+ 'thumbsize' => 2,
+ 'rememberpassword' => 0,
+ 'nocache' => 0,
+ 'diffonly' => 0,
+ 'showhiddencats' => 0,
+ 'norollbackdiff' => 0,
+ 'enotifwatchlistpages' => 0,
+ 'enotifusertalkpages' => 1,
+ 'enotifminoredits' => 0,
+ 'enotifrevealaddr' => 0,
+ 'shownumberswatching' => 1,
+ 'fancysig' => 0,
+ 'externaleditor' => 0,
+ 'externaldiff' => 0,
+ 'forceeditsummary' => 0,
+ 'showjumplinks' => 1,
+ 'justify' => 0,
+ 'numberheadings' => 0,
+ 'uselivepreview' => 0,
+ 'watchlistdays' => 3.0,
+ 'extendwatchlist' => 0,
+ 'watchlisthideminor' => 0,
+ 'watchlisthidebots' => 0,
+ 'watchlisthideown' => 0,
+ 'watchlisthideanons' => 0,
+ 'watchlisthideliu' => 0,
+ 'watchlisthidepatrolled' => 0,
+ 'watchcreations' => 0,
+ 'watchdefault' => 0,
+ 'watchmoves' => 0,
+ 'watchdeletion' => 0,
+ 'noconvertlink' => 0,
+ 'gender' => 'unknown',
);
/** Whether or not to allow and use real name fields. Defaults to true. */
$wgAllowRealName = true;
/*****************************************************************************
- * Extensions
+ * Extensions
*/
/**
$wgExtensionFunctions = array();
/**
- * Extension functions for initialisation of skins. This is called somewhat earlier
+ * Extension functions for initialisation of skins. This is called somewhat earlier
* than $wgExtensionFunctions.
*/
$wgSkinExtensionFunctions = array();
* Extension messages files
* Associative array mapping extension name to the filename where messages can be found.
* The file must create a variable called $messages.
- * When the messages are needed, the extension should call wfLoadMessagesFile()
+ * When the messages are needed, the extension should call wfLoadExtensionMessages().
+ *
+ * Example:
+ * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
+ *
*/
$wgExtensionMessagesFiles = array();
+/**
+ * Aliases for special pages provided by extensions.
+ * Associative array mapping special page to array of aliases. First alternative
+ * for each special page will be used as the normalised name for it. English
+ * aliases will be added to the end of the list so that they always work. The
+ * file must define a variable $aliases.
+ *
+ * Example:
+ * $wgExtensionAliasesFiles['Translate'] = dirname(__FILE__).'/Translate.alias.php';
+ */
+$wgExtensionAliasesFiles = array();
+
/**
* Parser output hooks.
* This is an associative array where the key is an extension-defined tag
* These will be called as an OutputPageParserOutput hook, if the relevant
* tag has been registered with the parser output object.
*
- * Registration is done with $pout->addOutputHook( $tag, $data ).
+ * Registration is done with $pout->addOutputHook( $tag, $data ).
*
* The callback has the form:
* function outputHook( $outputPage, $parserOutput, $data ) { ... }
/**
* List of valid skin names.
* The key should be the name in all lower case, the value should be a display name.
- * The default skins will be added later, by Skin::getSkinNames(). Use
+ * The default skins will be added later, by Skin::getSkinNames(). Use
* Skin::getSkinNames() as an accessor if you wish to have access to the full list.
*/
$wgValidSkinNames = array();
* Special page list.
* See the top of SpecialPage.php for documentation.
*/
-$wgSpecialPages = array();
+$wgSpecialPages = array();
/**
* Array mapping class names to filenames, for autoloading.
$wgAutoloadClasses = array();
/**
- * An array of extension types and inside that their names, versions, authors
- * and urls, note that the version and url key can be omitted.
+ * An array of extension types and inside that their names, versions, authors,
+ * urls, descriptions and pointers to localized description msgs. Note that
+ * the version, url, description and descriptionmsg key can be omitted.
*
* <code>
* $wgExtensionCredits[$type][] = array(
* 'name' => 'Example extension',
- * 'version' => 1.9,
+ * 'version' => 1.9,
+ * 'svn-revision' => '$LastChangedRevision: 64681 $',
* 'author' => 'Foo Barstein',
* 'url' => 'http://wwww.example.com/Example%20Extension/',
+ * 'description' => 'An example extension',
+ * 'descriptionmsg' => 'exampleextension-desc',
* );
* </code>
*
- * Where $type is 'specialpage', 'parserhook', or 'other'.
+ * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
*/
$wgExtensionCredits = array();
/*
/** Name of the external diff engine to use */
$wgExternalDiffEngine = false;
+/** Whether to use inline diff */
+$wgEnableHtmlDiff = false;
+
/** Use RC Patrolling to check for vandalism */
$wgUseRCPatrol = true;
+/** Use new page patrolling to check new pages on Special:Newpages */
+$wgUseNPPatrol = true;
+
+/** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
+$wgFeed = true;
+
/** Set maximum number of results to return in syndication feeds (RSS, Atom) for
* eg Recentchanges, Newpages. */
$wgFeedLimit = 50;
* pages larger than this size. */
$wgFeedDiffCutoff = 32768;
+/** Override the site's default RSS/ATOM feed for recentchanges that appears on
+ * every page. Some sites might have a different feed they'd like to promote
+ * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
+ * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
+ * of either 'rss' or 'atom'.
+ */
+$wgOverrideSiteFeed = array();
/**
* Additional namespaces. If the namespaces defined in Language.php and
/**
* Namespace aliases
- * These are alternate names for the primary localised namespace names, which
- * are defined by $wgExtraNamespaces and the language file. If a page is
- * requested with such a prefix, the request will be redirected to the primary
- * name.
+ * These are alternate names for the primary localised namespace names, which
+ * are defined by $wgExtraNamespaces and the language file. If a page is
+ * requested with such a prefix, the request will be redirected to the primary
+ * name.
*
* Set this to a map from namespace names to IDs.
* Example:
- * $wgNamespaceAliases = array(
+ * $wgNamespaceAliases = array(
* 'Wikipedian' => NS_USER,
* 'Help' => 100,
* );
*/
$wgCategoryPagingLimit = 200;
+/**
+ * Should the default category sortkey be the prefixed title?
+ * Run maintenance/refreshLinks.php after changing this.
+ */
+$wgCategoryPrefixedDefaultSortkey = true;
+
/**
* Browser Blacklist for unicode non compliant browsers
* Contains a list of regexps : "/regexp/" matching problematic browsers
* Netscape 2-4 detection
* The minor version may contain strings such as "Gold" or "SGoldC-SGI"
* Lots of non-netscape user agents have "compatible", so it's useful to check for that
- * with a negative assertion. The [UIN] identifier specifies the level of security
- * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
+ * with a negative assertion. The [UIN] identifier specifies the level of security
+ * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
* The language string is unreliable, it is missing on NS4 Mac.
- *
+ *
* Reference: http://www.psychedelix.com/agents/index.shtml
*/
'/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
'/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
'/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
-
+
/**
* MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
*
* @link http://en.wikipedia.org/wiki/Template%3AOS9
*/
'/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
-
+
/**
* Google wireless transcoder, seems to eat a lot of chars alive
* http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
*
* This variable is currently used ONLY for signature formatting, not for
* anything else.
+ *
+ * Timezones can be translated by editing MediaWiki messages of type
+ * timezone-nameinlowercase like timezone-utc.
*/
# $wgLocaltimezone = 'GMT';
# $wgLocaltimezone = 'PST8PDT';
/**
- * When translating messages with wfMsg(), it is not always clear what should be
- * considered UI messages and what shoud be content messages.
+ * When translating messages with wfMsg(), it is not always clear what should
+ * be considered UI messages and what should be content messages.
*
- * For example, for regular wikipedia site like en, there should be only one
- * 'mainpage', therefore when getting the link of 'mainpage', we should treate
- * it as content of the site and call wfMsgForContent(), while for rendering the
- * text of the link, we call wfMsg(). The code in default behaves this way.
- * However, sites like common do offer different versions of 'mainpage' and the
- * like for different languages. This array provides a way to override the
- * default behavior. For example, to allow language specific mainpage and
- * community portal, set
+ * For example, for the English Wikipedia, there should be only one 'mainpage',
+ * so when getting the link for 'mainpage', we should treat it as site content
+ * and call wfMsgForContent(), but for rendering the text of the link, we call
+ * wfMsg(). The code behaves this way by default. However, sites like the
+ * Wikimedia Commons do offer different versions of 'mainpage' and the like for
+ * different languages. This array provides a way to override the default
+ * behavior. For example, to allow language-specific main page and community
+ * portal, set
*
* $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
*/
'move',
'import',
'patrol',
+ 'merge',
+ 'suppress',
+);
+
+/**
+ * This restricts log access to those who have a certain right
+ * Users without this will not see it in the option menu and can not view it
+ * Restricted logs are not added to recent changes
+ * Logs should remain non-transcludable
+ */
+$wgLogRestrictions = array(
+ 'suppress' => 'suppressionlog'
+);
+
+/**
+ * Show/hide links on Special:Log will be shown for these log types.
+ *
+ * This is associative array of log type => boolean "hide by default"
+ *
+ * See $wgLogTypes for a list of available log types.
+ *
+ * For example:
+ * $wgFilterLogTypes => array(
+ * 'move' => true,
+ * 'import' => false,
+ * );
+ *
+ * Will display show/hide links for the move and import logs. Move logs will be
+ * hidden by default unless the link is clicked. Import logs will be shown by
+ * default, and hidden when the link is clicked.
+ *
+ * A message of the form log-show-hide-<type> should be added, and will be used
+ * for the link text.
+ */
+$wgFilterLogTypes = array(
+ 'patrol' => true
);
/**
'move' => 'movelogpage',
'import' => 'importlogpage',
'patrol' => 'patrol-log-page',
+ 'merge' => 'mergelog',
+ 'suppress' => 'suppressionlog',
);
/**
'move' => 'movelogpagetext',
'import' => 'importlogpagetext',
'patrol' => 'patrol-log-header',
+ 'merge' => 'mergelogpagetext',
+ 'suppress' => 'suppressionlogtext',
);
/**
$wgLogActions = array(
'block/block' => 'blocklogentry',
'block/unblock' => 'unblocklogentry',
+ 'block/reblock' => 'reblock-logentry',
'protect/protect' => 'protectedarticle',
'protect/modify' => 'modifiedarticleprotection',
'protect/unprotect' => 'unprotectedarticle',
+ 'protect/move_prot' => 'movedarticleprotection',
'rights/rights' => 'rightslogentry',
'delete/delete' => 'deletedarticle',
'delete/restore' => 'undeletedarticle',
'delete/revision' => 'revdelete-logentry',
+ 'delete/event' => 'logdelete-logentry',
'upload/upload' => 'uploadedimage',
- 'upload/overwrite' => 'overwroteimage',
+ 'upload/overwrite' => 'overwroteimage',
'upload/revert' => 'uploadedimage',
'move/move' => '1movedto2',
'move/move_redir' => '1movedto2_redir',
'import/upload' => 'import-logentry-upload',
'import/interwiki' => 'import-logentry-interwiki',
+ 'merge/merge' => 'pagemerge-logentry',
+ 'suppress/revision' => 'revdelete-logentry',
+ 'suppress/file' => 'revdelete-logentry',
+ 'suppress/event' => 'logdelete-logentry',
+ 'suppress/delete' => 'suppressedarticle',
+ 'suppress/block' => 'blocklogentry',
+ 'suppress/reblock' => 'reblock-logentry',
+);
+
+/**
+ * The same as above, but here values are names of functions,
+ * not messages
+ */
+$wgLogActionsHandlers = array();
+
+/**
+ * Maintain a log of newusers at Log/newusers?
+ */
+$wgNewUserLog = true;
+
+/**
+ * List of special pages, followed by what subtitle they should go under
+ * at Special:SpecialPages
+ */
+$wgSpecialPageGroups = array(
+ 'DoubleRedirects' => 'maintenance',
+ 'BrokenRedirects' => 'maintenance',
+ 'Lonelypages' => 'maintenance',
+ 'Uncategorizedpages' => 'maintenance',
+ 'Uncategorizedcategories' => 'maintenance',
+ 'Uncategorizedimages' => 'maintenance',
+ 'Uncategorizedtemplates' => 'maintenance',
+ 'Unusedcategories' => 'maintenance',
+ 'Unusedimages' => 'maintenance',
+ 'Protectedpages' => 'maintenance',
+ 'Protectedtitles' => 'maintenance',
+ 'Unusedtemplates' => 'maintenance',
+ 'Withoutinterwiki' => 'maintenance',
+ 'Longpages' => 'maintenance',
+ 'Shortpages' => 'maintenance',
+ 'Ancientpages' => 'maintenance',
+ 'Deadendpages' => 'maintenance',
+ 'Wantedpages' => 'maintenance',
+ 'Wantedcategories' => 'maintenance',
+ 'Wantedfiles' => 'maintenance',
+ 'Wantedtemplates' => 'maintenance',
+ 'Unwatchedpages' => 'maintenance',
+ 'Fewestrevisions' => 'maintenance',
+
+ 'Userlogin' => 'login',
+ 'Userlogout' => 'login',
+ 'CreateAccount' => 'login',
+
+ 'Recentchanges' => 'changes',
+ 'Recentchangeslinked' => 'changes',
+ 'Watchlist' => 'changes',
+ 'Newimages' => 'changes',
+ 'Newpages' => 'changes',
+ 'Log' => 'changes',
+ 'Tags' => 'changes',
+
+ 'Upload' => 'media',
+ 'Listfiles' => 'media',
+ 'MIMEsearch' => 'media',
+ 'FileDuplicateSearch' => 'media',
+ 'Filepath' => 'media',
+
+ 'Listusers' => 'users',
+ 'Listgrouprights' => 'users',
+ 'Ipblocklist' => 'users',
+ 'Contributions' => 'users',
+ 'Emailuser' => 'users',
+ 'Listadmins' => 'users',
+ 'Listbots' => 'users',
+ 'Userrights' => 'users',
+ 'Blockip' => 'users',
+ 'Preferences' => 'users',
+ 'Resetpass' => 'users',
+ 'DeletedContributions' => 'users',
+
+ 'Mostlinked' => 'highuse',
+ 'Mostlinkedcategories' => 'highuse',
+ 'Mostlinkedtemplates' => 'highuse',
+ 'Mostcategories' => 'highuse',
+ 'Mostimages' => 'highuse',
+ 'Mostrevisions' => 'highuse',
+
+ 'Allpages' => 'pages',
+ 'Prefixindex' => 'pages',
+ 'Listredirects' => 'pages',
+ 'Categories' => 'pages',
+ 'Disambiguations' => 'pages',
+
+ 'Randompage' => 'redirects',
+ 'Randomredirect' => 'redirects',
+ 'Mypage' => 'redirects',
+ 'Mytalk' => 'redirects',
+ 'Mycontributions' => 'redirects',
+ 'Search' => 'redirects',
+ 'LinkSearch' => 'redirects',
+
+ 'Movepage' => 'pagetools',
+ 'MergeHistory' => 'pagetools',
+ 'Revisiondelete' => 'pagetools',
+ 'Undelete' => 'pagetools',
+ 'Export' => 'pagetools',
+ 'Import' => 'pagetools',
+ 'Whatlinkshere' => 'pagetools',
+
+ 'Statistics' => 'wiki',
+ 'Version' => 'wiki',
+ 'Lockdb' => 'wiki',
+ 'Unlockdb' => 'wiki',
+ 'Allmessages' => 'wiki',
+ 'Popularpages' => 'wiki',
+
+ 'Specialpages' => 'other',
+ 'Blockme' => 'other',
+ 'Booksources' => 'other',
);
/**
*/
$wgSearchForwardUrl = null;
+/**
+ * Set a default target for external links, e.g. _blank to pop up a new window
+ */
+$wgExternalLinkTarget = false;
+
/**
* If true, external URL links in wiki text will be given the
* rel="nofollow" attribute as a hint to search engines that
$wgNoFollowNsExceptions = array();
/**
- * Robot policies per namespaces.
- * The default policy is 'index,follow', the array is made of namespace
- * constants as defined in includes/Defines.php
+ * If this is set to an array of domains, external links to these domain names
+ * (or any subdomains) will not be set to rel="nofollow" regardless of the
+ * value of $wgNoFollowLinks. For instance:
+ *
+ * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
+ *
+ * This would add rel="nofollow" to links to de.wikipedia.org, but not
+ * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
+ * etc.
+ */
+$wgNoFollowDomainExceptions = array();
+
+/**
+ * Default robot policy. The default policy is to encourage indexing and fol-
+ * lowing of links. It may be overridden on a per-namespace and/or per-page
+ * basis.
+ */
+$wgDefaultRobotPolicy = 'index,follow';
+
+/**
+ * Robot policies per namespaces. The default policy is given above, the array
+ * is made of namespace constants as defined in includes/Defines.php. You can-
+ * not specify a different default policy for NS_SPECIAL: it is always noindex,
+ * nofollow. This is because a number of special pages (e.g., ListPages) have
+ * many permutations of options that display the same data under redundant
+ * URLs, so search engine spiders risk getting lost in a maze of twisty special
+ * pages, all alike, and never reaching your actual content.
+ *
* Example:
* $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
*/
$wgNamespaceRobotPolicies = array();
/**
- * Robot policies per article.
- * These override the per-namespace robot policies.
- * Must be in the form of an array where the key part is a properly
- * canonicalised text form title and the value is a robot policy.
+ * Robot policies per article. These override the per-namespace robot policies.
+ * Must be in the form of an array where the key part is a properly canonical-
+ * ised text form title and the value is a robot policy.
* Example:
- * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex' );
+ * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
+ * 'User:Bob' => 'index,follow' );
+ * Example that DOES NOT WORK because the names are not canonical text forms:
+ * $wgArticleRobotPolicies = array(
+ * # Underscore, not space!
+ * 'Main_Page' => 'noindex,follow',
+ * # "Project", not the actual project name!
+ * 'Project:X' => 'index,follow',
+ * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false)!
+ * 'abc' => 'noindex,nofollow'
+ * );
*/
$wgArticleRobotPolicies = array();
/**
- * Specifies the minimal length of a user password. If set to
- * 0, empty passwords are allowed.
+ * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
+ * will not function, so users can't decide whether pages in that namespace are
+ * indexed by search engines. If set to null, default to $wgContentNamespaces.
+ * Example:
+ * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
+ */
+$wgExemptFromUserRobotsControl = null;
+
+/**
+ * Specifies the minimal length of a user password. If set to 0, empty pass-
+ * words are allowed.
*/
$wgMinimalPasswordLength = 0;
$wgSortSpecialPages = true;
/**
- * Specify the name of a skin that should not be presented in the
- * list of available skins.
- * Use for blacklisting a skin which you do not want to remove
+ * Specify the name of a skin that should not be presented in the list of a-
+ * vailable skins. Use for blacklisting a skin which you do not want to remove
* from the .../skins/ directory
*/
$wgSkipSkin = '';
$wgDisabledActions = array();
/**
- * Disable redirects to special pages and interwiki redirects, which use a 302 and have no "redirected from" link
+ * Disable redirects to special pages and interwiki redirects, which use a 302
+ * and have no "redirected from" link.
*/
$wgDisableHardRedirects = false;
$wgSorbsUrl = 'http.dnsbl.sorbs.net.';
/**
- * Proxy whitelist, list of addresses that are assumed to be non-proxy despite what the other
- * methods might say
+ * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
+ * what the other methods might say.
*/
$wgProxyWhitelist = array();
/**
- * Simple rate limiter options to brake edit floods.
- * Maximum number actions allowed in the given number of seconds;
- * after that the violating client receives HTTP 500 error pages
- * until the period elapses.
+ * Simple rate limiter options to brake edit floods. Maximum number actions
+ * allowed in the given number of seconds; after that the violating client re-
+ * ceives HTTP 500 error pages until the period elapses.
*
* array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
*
- * This option set is experimental and likely to change.
- * Requires memcached.
+ * This option set is experimental and likely to change. Requires memcached.
*/
$wgRateLimits = array(
'edit' => array(
'anon' => null, // for any and all anonymous edits (aggregate)
'user' => null, // for each logged-in user
- 'newbie' => null, // for each recent account; overrides 'user'
+ 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
'ip' => null, // for each anon and recent account
'subnet' => null, // ... with final octet removed
),
/**
* Array of groups which should never trigger the rate limiter
+ *
+ * @deprecated as of 1.13.0, the preferred method is using
+ * $wgGroupPermissions[]['noratelimit']. However, this will still
+ * work if desired.
+ *
+ * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
+ */
+$wgRateLimitsExcludedGroups = array();
+
+/**
+ * Array of IPs which should be excluded from rate limits.
+ * This may be useful for whitelisting NAT gateways for conferences, etc.
*/
-$wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
+$wgRateLimitsExcludedIPs = array();
/**
* On Special:Unusedimages, consider images "used", if they are put
/**
* An array of external mysql servers, e.g.
* $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
+ * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
*/
$wgExternalServers = array();
* The place to put new revisions, false to put them in the local text table.
* Part of a URL, e.g. DB://cluster1
*
- * Can be an array instead of a single string, to enable data distribution. Keys
+ * Can be an array instead of a single string, to enable data distribution. Keys
* must be consecutive integers, starting at zero. Example:
*
* $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
$wgRevisionCacheExpiry = 0;
/**
-* list of trusted media-types and mime types.
-* Use the MEDIATYPE_xxx constants to represent media types.
-* This list is used by Image::isSafeFile
-*
-* Types not listed here will have a warning about unsafe content
-* displayed on the images description page. It would also be possible
-* to use this for further restrictions, like disabling direct
-* [[media:...]] links for non-trusted formats.
-*/
+ * list of trusted media-types and mime types.
+ * Use the MEDIATYPE_xxx constants to represent media types.
+ * This list is used by Image::isSafeFile
+ *
+ * Types not listed here will have a warning about unsafe content
+ * displayed on the images description page. It would also be possible
+ * to use this for further restrictions, like disabling direct
+ * [[media:...]] links for non-trusted formats.
+ */
$wgTrustedMediaFormats= array(
MEDIATYPE_BITMAP, //all bitmap formats
MEDIATYPE_AUDIO, //all audio formats
$wgUseAjax = true;
/**
- * Enable auto suggestion for the search bar
- * Requires $wgUseAjax to be true too.
- * Causes wfSajaxSearch to be added to $wgAjaxExportList
- */
-$wgAjaxSearch = false;
-
-/**
- * List of Ajax-callable functions.
+ * List of Ajax-callable functions.
* Extensions acting as Ajax callbacks must register here
*/
-$wgAjaxExportList = array( );
+$wgAjaxExportList = array( 'wfAjaxGetThumbnailUrl', 'wfAjaxGetFileUrl' );
/**
* Enable watching/unwatching pages using AJAX.
*/
$wgAllowDisplayTitle = true;
+/**
+ * for consistency, restrict DISPLAYTITLE to titles that normalize to the same canonical DB key
+ */
+$wgRestrictDisplayTitle = true;
+
/**
* Array of usernames which may not be registered or logged in from
* Maintenance scripts can still use these
'Conversion script', // Used for the old Wikipedia software upgrade
'Maintenance script', // Maintenance scripts which perform editing, image import script
'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
+ 'msg:double-redirect-fixer', // Automatic double redirect fix
);
/**
$wgContentNamespaces = array( NS_MAIN );
/**
- * Maximum amount of virtual memory available to shell processes under linux, in KB.
+ * Maximum amount of virtual memory available to shell processes under linux, in KB.
*/
$wgMaxShellMemory = 102400;
*/
$wgMaxShellFileSize = 102400;
+/**
+ * Maximum CPU time in seconds for shell processes under linux
+ */
+$wgMaxShellTime = 180;
+
+/**
+* Executable name of PHP cli client (php/php5)
+*/
+$wgPhpCli = 'php';
+
/**
* DJVU settings
* Path of the djvudump executable
/**
* Path of the djvutoxml executable
- * This works like djvudump except much, much slower as of version 3.5.
+ * This works like djvudump except much, much slower as of version 3.5.
*
* For now I recommend you use djvudump instead. The djvuxml output is
* probably more stable, so we'll switch back to it as soon as they fix
* (page edits, rollback, etc.) when an authorised user
* accesses it
*/
-$wgEnableWriteAPI = false;
+$wgEnableWriteAPI = true;
/**
* API module extensions
* Extension modules may override the core modules.
*/
$wgAPIModules = array();
+$wgAPIMetaModules = array();
+$wgAPIPropModules = array();
+$wgAPIListModules = array();
+
+/**
+ * Maximum amount of rows to scan in a DB query in the API
+ * The default value is generally fine
+ */
+$wgAPIMaxDBRows = 5000;
+
+/**
+ * The maximum size (in bytes) of an API result.
+ * Don't set this lower than $wgMaxArticleSize*1024
+ */
+$wgAPIMaxResultSize = 8388608;
+
+/**
+ * The maximum number of uncached diffs that can be retrieved in one API
+ * request. Set this to 0 to disable API diffs altogether
+ */
+$wgAPIMaxUncachedDiffs = 1;
/**
* Parser test suite files to be run by parserTests.php when no specific
/**
* Break out of framesets. This can be used to prevent external sites from
- * framing your site with ads.
+ * framing your site with ads.
*/
$wgBreakFrames = false;
/**
- * Set this to an array of special page names to prevent
+ * Set this to an array of special page names to prevent
* maintenance/updateSpecialPages.php from updating those pages.
*/
$wgDisableQueryPageUpdate = false;
-/**
- * Set this to false to disable cascading protection
- */
-$wgEnableCascadingProtection = true;
-
/**
* Disable output compression (enabled by default if zlib is available)
*/
$wgDisableOutputCompression = false;
/**
- * If lag is higher than $wgSlaveLagWarning, show a warning in some special
+ * If lag is higher than $wgSlaveLagWarning, show a warning in some special
* pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
* show a more obvious warning.
*/
$wgSlaveLagWarning = 10;
$wgSlaveLagCritical = 30;
+
+/**
+ * Parser configuration. Associative array with the following members:
+ *
+ * class The class name
+ *
+ * preprocessorClass The preprocessor class. Two classes are currently available:
+ * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
+ * storage, and Preprocessor_DOM, which uses the DOM module for
+ * temporary storage. Preprocessor_DOM generally uses less memory;
+ * the speed of the two is roughly the same.
+ *
+ * If this parameter is not given, it uses Preprocessor_DOM if the
+ * DOM module is available, otherwise it uses Preprocessor_Hash.
+ *
+ * The entire associative array will be passed through to the constructor as
+ * the first parameter. Note that only Setup.php can use this variable --
+ * the configuration will change at runtime via $wgParser member functions, so
+ * the contents of this variable will be out-of-date. The variable can only be
+ * changed during LocalSettings.php, in particular, it can't be changed during
+ * an extension setup function.
+ */
+$wgParserConf = array(
+ 'class' => 'Parser',
+ #'preprocessorClass' => 'Preprocessor_Hash',
+);
+
+/**
+ * LinkHolderArray batch size
+ * For debugging
+ */
+$wgLinkHolderBatchSize = 1000;
+
+/**
+ * Hooks that are used for outputting exceptions. Format is:
+ * $wgExceptionHooks[] = $funcname
+ * or:
+ * $wgExceptionHooks[] = array( $class, $funcname )
+ * Hooks should return strings or false
+ */
+$wgExceptionHooks = array();
+
+/**
+ * Page property link table invalidation lists. Should only be set by exten-
+ * sions.
+ */
+$wgPagePropLinkInvalidations = array(
+ 'hiddencat' => 'categorylinks',
+);
+
+/**
+ * Maximum number of links to a redirect page listed on
+ * Special:Whatlinkshere/RedirectDestination
+ */
+$wgMaxRedirectLinksRetrieved = 500;
+
+/**
+ * Maximum number of calls per parse to expensive parser functions such as
+ * PAGESINCATEGORY.
+ */
+$wgExpensiveParserFunctionLimit = 100;
+
+/**
+ * Maximum number of pages to move at once when moving subpages with a page.
+ */
+$wgMaximumMovedPages = 100;
+
+/**
+ * Fix double redirects after a page move.
+ * Tends to conflict with page move vandalism, use only on a private wiki.
+ */
+$wgFixDoubleRedirects = false;
+
+/**
+ * Max number of redirects to follow when resolving redirects.
+ * 1 means only the first redirect is followed (default behavior).
+ * 0 or less means no redirects are followed.
+ */
+$wgMaxRedirects = 1;
+
+/**
+ * Array of invalid page redirect targets.
+ * Attempting to create a redirect to any of the pages in this array
+ * will make the redirect fail.
+ * Userlogout is hard-coded, so it does not need to be listed here.
+ * (bug 10569) Disallow Mypage and Mytalk as well.
+ *
+ * As of now, this only checks special pages. Redirects to pages in
+ * other namespaces cannot be invalidated by this variable.
+ */
+$wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
+
+/**
+ * Array of namespaces to generate a sitemap for when the
+ * maintenance/generateSitemap.php script is run, or false if one is to be ge-
+ * nerated for all namespaces.
+ */
+$wgSitemapNamespaces = false;
+
+
+/**
+ * If user doesn't specify any edit summary when making a an edit, MediaWiki
+ * will try to automatically create one. This feature can be disabled by set-
+ * ting this variable false.
+ */
+$wgUseAutomaticEditSummaries = true;
+
+/**
+ * Limit password attempts to X attempts per Y seconds per IP per account.
+ * Requires memcached.
+ */
+$wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
+
+/**
+ * Display user edit counts in various prominent places.
+ */
+$wgEdititis = false;
+
+/**
+ * Enable the UniversalEditButton for browsers that support it
+ * (currently only Firefox with an extension)
+ * See http://universaleditbutton.org for more background information
+ */
+$wgUniversalEditButton = true;
+
+/**
+ * Allow id's that don't conform to HTML4 backward compatibility requirements.
+ * This is currently for testing; if all goes well, this option will be removed
+ * and the functionality will be enabled universally.
+ */
+$wgEnforceHtmlIds = true;
+
+/**
+ * Search form behavior
+ * true = use Go & Search buttons
+ * false = use Go button & Advanced search link
+ */
+$wgUseTwoButtonsSearchForm = true;
+
+/**
+ * Preprocessor caching threshold
+ */
+$wgPreprocessorCacheThreshold = 1000;
+
+/**
+ * Allow filtering by change tag in recentchanges, history, etc
+ * Has no effect if no tags are defined in valid_tag.
+ */
+$wgUseTagFilter = true;
+
+/**
+ * Allow redirection to another page when a user logs in.
+ * To enable, set to a string like 'Main Page'
+ */
+$wgRedirectOnLogin = null;
+
+/**
+ * Characters to prevent during new account creations.
+ * This is used in a regular expression character class during
+ * registration (regex metacharacters like / are escaped).
+ */
+$wgInvalidUsernameCharacters = '@';
+
+/**
+ * Character used as a delimiter when testing for interwiki userrights
+ * (In Special:UserRights, it is possible to modify users on different
+ * databases if the delimiter is used, e.g. Someuser@enwiki).
+ *
+ * It is recommended that you have this delimiter in
+ * $wgInvalidUsernameCharacters above, or you will not be able to
+ * modify the user rights of those users via Special:UserRights
+ */
+$wgUserrightsInterwikiDelimiter = '@';
scripts.mit.edu / autoinstallsdev / mediawiki.git / blobdiff