<?php
/**
*
- * DO NOT EVER EDIT THIS FILE!
+ * NEVER EDIT THIS FILE
*
*
* To customize your installation, edit "LocalSettings.php". If you make
* depends on it.
*
* Documentation is in the source and on:
- * http://www.mediawiki.org/wiki/Help:Configuration_settings
+ * http://www.mediawiki.org/wiki/Manual:Configuration_settings
*
- * @package MediaWiki
*/
# This is not a valid entry point, perform no further processing unless MEDIAWIKI is defined
if( !defined( 'MEDIAWIKI' ) ) {
- die( "This file is part of MediaWiki and is not a valid entry point\n" );
+ echo "This file is part of MediaWiki and is not a valid entry point\n";
+ die( 1 );
}
/**
* Create a site configuration object
* Not used for much in a default install
*/
-require_once( 'includes/SiteConfiguration.php' );
-$wgConf = new SiteConfiguration;
+if ( !defined( 'MW_PHP4' ) ) {
+ require_once( "$IP/includes/SiteConfiguration.php" );
+ $wgConf = new SiteConfiguration;
+}
/** MediaWiki version number */
-$wgVersion = '1.5.8';
+$wgVersion = '1.16.0';
/** Name of the site. It must be changed in LocalSettings.php */
$wgSitename = 'MediaWiki';
-/** Will be same as you set @see $wgSitename */
-$wgMetaNamespace = FALSE;
+/**
+ * Name of the project namespace. If left set to false, $wgSitename will be
+ * used instead.
+ */
+$wgMetaNamespace = false;
+
+/**
+ * Name of the project talk namespace.
+ *
+ * Normally you can ignore this and it will be something like
+ * $wgMetaNamespace . "_talk". In some languages, you may want to set this
+ * manually for grammatical reasons. It is currently only respected by those
+ * languages where it might be relevant and where no automatic grammar converter
+ * exists.
+ */
+$wgMetaNamespaceTalk = false;
-/** URL of the server. It will be automaticly build including https mode */
+/** URL of the server. It will be automatically built including https mode */
$wgServer = '';
if( isset( $_SERVER['SERVER_NAME'] ) ) {
$wgServer = $wgProto.'://' . $wgServerName;
# If the port is a non-standard one, add it to the URL
if( isset( $_SERVER['SERVER_PORT'] )
+ && !strpos( $wgServerName, ':' )
&& ( ( $wgProto == 'http' && $_SERVER['SERVER_PORT'] != 80 )
- || ( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
+ || ( $wgProto == 'https' && $_SERVER['SERVER_PORT'] != 443 ) ) ) {
$wgServer .= ":" . $_SERVER['SERVER_PORT'];
}
-unset($wgProto);
/**
* The path we should point to.
* It might be a virtual path in case with use apache mod_rewrite for example
+ *
+ * This *needs* to be set correctly.
+ *
+ * Other paths will be set to defaults based on it unless they are directly
+ * set in LocalSettings.php
*/
$wgScriptPath = '/wiki';
/**
- * Whether to support URLs like index.php/Page_title
- * @global bool $wgUsePathInfo
+ * Whether to support URLs like index.php/Page_title These often break when PHP
+ * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set,
+ * but then again it may not; lighttpd converts incoming path data to lowercase
+ * on systems with case-insensitive filesystems, and there have been reports of
+ * problems on Apache as well.
+ *
+ * To be safe we'll continue to keep it off by default.
+ *
+ * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly
+ * incorrect garbage, or to true if it is really correct.
+ *
+ * The default $wgArticlePath will be set based on this value at runtime, but if
+ * you have customized it, having this incorrectly set to true can cause
+ * redirect loops when "pretty URLs" are used.
*/
-$wgUsePathInfo = ( strpos( php_sapi_name(), 'cgi' ) === false );
+$wgUsePathInfo =
+ ( strpos( php_sapi_name(), 'cgi' ) === false ) &&
+ ( strpos( php_sapi_name(), 'apache2filter' ) === false ) &&
+ ( strpos( php_sapi_name(), 'isapi' ) === false );
-/**#@+
+/**@{
* Script users will request to get articles
- * ATTN: Old installations used wiki.phtml and redirect.phtml -
- * make sure that LocalSettings.php is correctly set!
- * @deprecated
- */
-/**
- * @global string $wgScript
- */
-$wgScript = "{$wgScriptPath}/index.php";
-/**
- * @global string $wgRedirectScript
+ * ATTN: Old installations used wiki.phtml and redirect.phtml - make sure that
+ * LocalSettings.php is correctly set!
+ *
+ * Will be set based on $wgScriptPath in Setup.php if not overridden in
+ * LocalSettings.php. Generally you should not need to change this unless you
+ * don't like seeing "index.php".
*/
-$wgRedirectScript = "{$wgScriptPath}/redirect.php";
-/**#@-*/
+$wgScriptExtension = '.php'; ///< extension to append to script names by default
+$wgScript = false; ///< defaults to "{$wgScriptPath}/index{$wgScriptExtension}"
+$wgRedirectScript = false; ///< defaults to "{$wgScriptPath}/redirect{$wgScriptExtension}"
+/**@}*/
-/**#@+
- * @global string
+/**@{
+ * These various web and file path variables are set to their defaults
+ * in Setup.php if they are not explicitly set from LocalSettings.php.
+ * If you do override them, be sure to set them all!
+ *
+ * These will relatively rarely need to be set manually, unless you are
+ * splitting style sheets or images outside the main document root.
*/
/**
- * style path as seen by users
- * @global string $wgStylePath
+ * asset paths as seen by users
*/
-$wgStylePath = "{$wgScriptPath}/skins";
+$wgStylePath = false; ///< defaults to "{$wgScriptPath}/skins"
+$wgExtensionAssetsPath = false; ///< defaults to "{$wgScriptPath}/extensions"
+
/**
* filesystem stylesheets directory
- * @global string $wgStyleDirectory
*/
-$wgStyleDirectory = "{$IP}/skins";
+$wgStyleDirectory = false; ///< defaults to "{$IP}/skins"
$wgStyleSheetPath = &$wgStylePath;
-$wgArticlePath = "{$wgScript}?title=$1";
-$wgUploadPath = "{$wgScriptPath}/upload";
-$wgUploadDirectory = "{$IP}/upload";
+$wgArticlePath = false; ///< default to "{$wgScript}/$1" or "{$wgScript}?title=$1", depending on $wgUsePathInfo
+$wgUploadPath = false; ///< defaults to "{$wgScriptPath}/images"
+$wgUploadDirectory = false; ///< defaults to "{$IP}/images"
$wgHashedUploadDirectory = true;
-$wgLogo = "{$wgUploadPath}/wiki.png";
-$wgMathPath = "{$wgUploadPath}/math";
-$wgMathDirectory = "{$wgUploadDirectory}/math";
-$wgTmpDirectory = "{$wgUploadDirectory}/tmp";
+$wgLogo = false; ///< defaults to "{$wgStylePath}/common/images/wiki.png"
+$wgFavicon = '/favicon.ico';
+$wgAppleTouchIcon = false; ///< This one'll actually default to off. For iPhone and iPod Touch web app bookmarks
+$wgMathPath = false; ///< defaults to "{$wgUploadPath}/math"
+$wgMathDirectory = false; ///< defaults to "{$wgUploadDirectory}/math"
+$wgTmpDirectory = false; ///< defaults to "{$wgUploadDirectory}/tmp"
$wgUploadBaseUrl = "";
-/**#@-*/
+/**@}*/
+
+/**
+ * Directory for caching data in the local filesystem. Should not be accessible
+ * from the web. Set this to false to not use any local caches.
+ *
+ * Note: if multiple wikis share the same localisation cache directory, they
+ * must all have the same set of extensions. You can set a directory just for
+ * the localisation cache using $wgLocalisationCacheConf['storeDirectory'].
+ */
+$wgCacheDirectory = false;
+
+/**
+ * Default value for chmoding of new directories.
+ */
+$wgDirectoryMode = 0777;
+
+/**
+ * New file storage paths; currently used only for deleted files.
+ * Set it like this:
+ *
+ * $wgFileStore['deleted']['directory'] = '/var/wiki/private/deleted';
+ *
+ */
+$wgFileStore = array();
+$wgFileStore['deleted']['directory'] = false;///< Defaults to $wgUploadDirectory/deleted
+$wgFileStore['deleted']['url'] = null; ///< Private
+$wgFileStore['deleted']['hash'] = 3; ///< 3-level subdirectory split
+
+$wgImgAuthDetails = false; ///< defaults to false - only set to true if you use img_auth and want the user to see details on why access failed
+$wgImgAuthPublicTest = true; ///< defaults to true - if public read is turned on, no need for img_auth, config error unless other access is used
+
+/**@{
+ * File repository structures
+ *
+ * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is
+ * an array of such structures. Each repository structure is an associative
+ * array of properties configuring the repository.
+ *
+ * Properties required for all repos:
+ * class The class name for the repository. May come from the core or an extension.
+ * The core repository classes are LocalRepo, ForeignDBRepo, FSRepo.
+ *
+ * name A unique name for the repository.
+ *
+ * For most core repos:
+ * url Base public URL
+ * hashLevels The number of directory levels for hash-based division of files
+ * thumbScriptUrl The URL for thumb.php (optional, not recommended)
+ * transformVia404 Whether to skip media file transformation on parse and rely on a 404
+ * handler instead.
+ * initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE],
+ * determines whether filenames implicitly start with a capital letter.
+ * The current implementation may give incorrect description page links
+ * when the local $wgCapitalLinks and initialCapital are mismatched.
+ * pathDisclosureProtection
+ * May be 'paranoid' to remove all parameters from error messages, 'none' to
+ * leave the paths in unchanged, or 'simple' to replace paths with
+ * placeholders. Default for LocalRepo is 'simple'.
+ * fileMode This allows wikis to set the file mode when uploading/moving files. Default
+ * is 0644.
+ * directory The local filesystem directory where public files are stored. Not used for
+ * some remote repos.
+ * thumbDir The base thumbnail directory. Defaults to <directory>/thumb.
+ * thumbUrl The base thumbnail URL. Defaults to <url>/thumb.
+ *
+ *
+ * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored
+ * for local repositories:
+ * descBaseUrl URL of image description pages, e.g. http://en.wikipedia.org/wiki/Image:
+ * scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g.
+ * http://en.wikipedia.org/w
+ *
+ * articleUrl Equivalent to $wgArticlePath, e.g. http://en.wikipedia.org/wiki/$1
+ * fetchDescription Fetch the text of the remote file description page. Equivalent to
+ * $wgFetchCommonsDescriptions.
+ *
+ * ForeignDBRepo:
+ * dbType, dbServer, dbUser, dbPassword, dbName, dbFlags
+ * equivalent to the corresponding member of $wgDBservers
+ * tablePrefix Table prefix, the foreign wiki's $wgDBprefix
+ * hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc
+ *
+ * ForeignAPIRepo:
+ * apibase Use for the foreign API's URL
+ * apiThumbCacheExpiry How long to locally cache thumbs for
+ *
+ * The default is to initialise these arrays from the MW<1.11 backwards compatible settings:
+ * $wgUploadPath, $wgThumbnailScriptPath, $wgSharedUploadDirectory, etc.
+ */
+$wgLocalFileRepo = false;
+$wgForeignFileRepos = array();
+/**@}*/
+
+/**
+ * Use Commons as a remote file repository. Essentially a wrapper, when this
+ * is enabled $wgForeignFileRepos will point at Commons with a set of default
+ * settings
+ */
+$wgUseInstantCommons = false;
/**
- * The external URL protocols (regexp)
+ * Allowed title characters -- regex character class
+ * Don't change this unless you know what you're doing
+ *
+ * Problematic punctuation:
+ * []{}|# Are needed for link syntax, never enable these
+ * <> Causes problems with HTML escaping, don't use
+ * % Enabled by default, minor problems with path to query rewrite rules, see below
+ * + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache
+ * ? Enabled by default, but doesn't work with path to PATH_INFO rewrites
+ *
+ * All three of these punctuation problems can be avoided by using an alias, instead of a
+ * rewrite rule of either variety.
+ *
+ * The problem with % is that when using a path to query rewrite rule, URLs are
+ * double-unescaped: once by Apache's path conversion code, and again by PHP. So
+ * %253F, for example, becomes "?". Our code does not double-escape to compensate
+ * for this, indeed double escaping would break if the double-escaped title was
+ * passed in the query string rather than the path. This is a minor security issue
+ * because articles can be created such that they are hard to view or edit.
+ *
+ * In some rare cases you may wish to remove + for compatibility with old links.
+ *
+ * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but
+ * this breaks interlanguage links
+ */
+$wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+";
+$wgIllegalFileChars = ":"; // These are additional characters that should be replaced with '-' in file names
+
+
+/**
+ * The external URL protocols
*/
-$wgUrlProtocols = 'http:\/\/|https:\/\/|ftp:\/\/|irc:\/\/|gopher:\/\/|news:|mailto:';
+$wgUrlProtocols = array(
+ 'http://',
+ 'https://',
+ 'ftp://',
+ 'irc://',
+ 'gopher://',
+ 'telnet://', // Well if we're going to support the above.. -ævar
+ 'nntp://', // @bug 3808 RFC 1738
+ 'worldwind://',
+ 'mailto:',
+ 'news:',
+ 'svn://',
+);
/** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array.
* Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses.
- * @global string $wgAntivirus
*/
-$wgAntivirus= NULL;
+$wgAntivirus= null;
/** Configuration for different virus scanners. This an associative array of associative arrays:
* it contains on setup array per known scanner type. The entry is selected by $wgAntivirus, i.e.
* "messagepattern" is a perl regular expression to extract the meaningful part of the scanners
* output. The relevant part should be matched as group one (\1).
* If not defined or the pattern does not match, the full message is shown to the user.
- *
- * @global array $wgAntivirusSetup
*/
-$wgAntivirusSetup= array(
+$wgAntivirusSetup = array(
#setup for clamav
'clamav' => array (
'command' => "clamscan --no-summary ",
- 'codemap'=> array (
- "0"=> AV_NO_VIRUS, #no virus
- "1"=> AV_VIRUS_FOUND, #virus found
- "52"=> AV_SCAN_ABORTED, #unsupported file format (probably imune)
- "*"=> AV_SCAN_FAILED, #else scan failed
+ 'codemap' => array (
+ "0" => AV_NO_VIRUS, # no virus
+ "1" => AV_VIRUS_FOUND, # virus found
+ "52" => AV_SCAN_ABORTED, # unsupported file format (probably imune)
+ "*" => AV_SCAN_FAILED, # else scan failed
),
- 'messagepattern'=> '/.*?:(.*)/sim',
+ 'messagepattern' => '/.*?:(.*)/sim',
),
#setup for f-prot
'f-prot' => array (
'command' => "f-prot ",
- 'codemap'=> array (
- "0"=> AV_NO_VIRUS, #no virus
- "3"=> AV_VIRUS_FOUND, #virus found
- "6"=> AV_VIRUS_FOUND, #virus found
- "*"=> AV_SCAN_FAILED, #else scan failed
+ 'codemap' => array (
+ "0" => AV_NO_VIRUS, # no virus
+ "3" => AV_VIRUS_FOUND, # virus found
+ "6" => AV_VIRUS_FOUND, # virus found
+ "*" => AV_SCAN_FAILED, # else scan failed
),
- 'messagepattern'=> '/.*?Infection:(.*)$/m',
+ 'messagepattern' => '/.*?Infection:(.*)$/m',
),
);
-/** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected.
- * @global boolean $wgAntivirusRequired
-*/
+/** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */
$wgAntivirusRequired= true;
-/** Determines if the mime type of uploaded files should be checked
- * @global boolean $wgVerifyMimeType
-*/
+/** Determines if the mime type of uploaded files should be checked */
$wgVerifyMimeType= true;
-/** Sets the mime type definition file to use by MimeMagic.php.
-* @global string $wgMimeTypeFile
-*/
-#$wgMimeTypeFile= "/etc/mime.types";
+/** Sets the mime type definition file to use by MimeMagic.php. */
$wgMimeTypeFile= "includes/mime.types";
-#$wgMimeTypeFile= NULL; #use build in defaults only.
+#$wgMimeTypeFile= "/etc/mime.types";
+#$wgMimeTypeFile= null; #use built-in defaults only.
-/** Sets the mime type info file to use by MimeMagic.php.
-* @global string $wgMimeInfoFile
-*/
+/** Sets the mime type info file to use by MimeMagic.php. */
$wgMimeInfoFile= "includes/mime.info";
-#$wgMimeInfoFile= NULL; #use build in defaults only.
+#$wgMimeInfoFile= null; #use built-in defaults only.
/** Switch for loading the FileInfo extension by PECL at runtime.
-* This should be used only if fileinfo is installed as a shared object / dynamic libary
-* @global string $wgLoadFileinfoExtension
-*/
+ * This should be used only if fileinfo is installed as a shared object
+ * or a dynamic libary
+ */
$wgLoadFileinfoExtension= false;
-/** Sets an external mime detector program. The command must print only the mime type to standard output.
-* the name of the file to process will be appended to the command given here.
-* If not set or NULL, mime_content_type will be used if available.
-*/
-$wgMimeDetectorCommand= NULL; # use internal mime_content_type function, available since php 4.3.0
-#$wgMimeDetectorCommand= "file -bi" #use external mime detector (linux)
+/** Sets an external mime detector program. The command must print only
+ * the mime type to standard output.
+ * The name of the file to process will be appended to the command given here.
+ * If not set or NULL, mime_content_type will be used if available.
+ */
+$wgMimeDetectorCommand= null; # use internal mime_content_type function, available since php 4.3.0
+#$wgMimeDetectorCommand= "file -bi"; #use external mime detector (Linux)
-/** Switch for trivial mime detection. Used by thumb.php to disable all fance things,
-* because only a few types of images are needed and file extensions can be trusted.
-*/
+/** Switch for trivial mime detection. Used by thumb.php to disable all fance
+ * things, because only a few types of images are needed and file extensions
+ * can be trusted.
+ */
$wgTrivialMimeDetection= false;
/**
- * Produce hashed HTML article paths. Used internally, do not set.
+ * Additional XML types we can allow via mime-detection.
+ * array = ( 'rootElement' => 'associatedMimeType' )
*/
-$wgMakeDumpLinks = false;
+$wgXMLMimeTypes = array(
+ 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml',
+ 'svg' => 'image/svg+xml',
+ 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram',
+ 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml?
+ 'html' => 'text/html', // application/xhtml+xml?
+);
/**
* To set 'pretty' URL paths for actions other than
* no file of the given name is found in the local repository (for [[Image:..]],
* [[Media:..]] links). Thumbnails will also be looked for and generated in this
* directory.
+ *
+ * Note that these configuration settings can now be defined on a per-
+ * repository basis for an arbitrary number of file repositories, using the
+ * $wgForeignFileRepos variable.
*/
$wgUseSharedUploads = false;
/** Full path on the web server where shared uploads can be found */
$wgSharedUploadDBprefix = '';
/** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */
$wgCacheSharedUploads = true;
+/**
+* Allow for upload to be copied from an URL. Requires Special:Upload?source=web
+* The timeout for copy uploads is set by $wgHTTPTimeout.
+*/
+$wgAllowCopyUploads = false;
+
+/**
+ * Max size for uploads, in bytes. Currently only works for uploads from URL
+ * via CURL (see $wgAllowCopyUploads). The only way to impose limits on
+ * normal uploads is currently to edit php.ini.
+ */
+$wgMaxUploadSize = 1024*1024*100; # 100MB
/**
* Point the upload navigation link to an external URL
* Useful if you want to use a shared repository by default
- * without disabling local uploads
+ * without disabling local uploads (use $wgEnableUploads = false for that)
* e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload';
-*/
+ *
+ * This also affects images inline images that do not exist. In that case the URL will get
+ * (?|&)wpDestFile=<filename> appended to it as appropriate.
+ */
$wgUploadNavigationUrl = false;
/**
* apache servers don't have read/write access to the thumbnail path.
*
* Example:
- * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb.php";
+ * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}";
*/
$wgThumbnailScriptPath = false;
$wgSharedThumbnailScriptPath = false;
*
* Please specify the namespace, as in the example below.
*/
-$wgRepositoryBaseUrl="http://commons.wikimedia.org/wiki/Image:";
-
+$wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/Image:";
#
# Email settings
/**
* Site admin email address
* Default to wikiadmin@SERVER_NAME
- * @global string $wgEmergencyContact
*/
$wgEmergencyContact = 'wikiadmin@' . $wgServerName;
* Password reminder email address
* The address we should use as sender when a user is requesting his password
* Default to apache@SERVER_NAME
- * @global string $wgPasswordSender
*/
-$wgPasswordSender = '
Wikipedia Mail <apache@' . $wgServerName . '>';
+$wgPasswordSender = '
MediaWiki Mail <apache@' . $wgServerName . '>';
/**
* dummy address which should be accepted during mail send action
* Set to true to enable the e-mail basic features:
* Password reminders, etc. If sending e-mail on your
* server doesn't work, you might want to disable this.
- * @global bool $wgEnableEmail
*/
$wgEnableEmail = true;
/**
* Set to true to enable user-to-user e-mail.
* This can potentially be abused, as it's hard to track.
- * @global bool $wgEnableUserEmail
*/
$wgEnableUserEmail = true;
+/**
+ * Set to true to put the sending user's email in a Reply-To header
+ * instead of From. ($wgEmergencyContact will be used as From.)
+ *
+ * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value,
+ * which can cause problems with SPF validation and leak recipient addressses
+ * when bounces are sent to the sender.
+ */
+$wgUserEmailUseReplyTo = false;
+
+/**
+ * Minimum time, in hours, which must elapse between password reminder
+ * emails for a given account. This is to prevent abuse by mail flooding.
+ */
+$wgPasswordReminderResendTime = 24;
+
+/**
+ * The time, in seconds, when an emailed temporary password expires.
+ */
+$wgNewPasswordExpiry = 3600 * 24 * 7;
+
/**
* SMTP Mode
* For using a direct (authenticated) SMTP server connection.
* "username" => user,
* "password" => password
* </code>
- *
- * @global mixed $wgSMTP
*/
$wgSMTP = false;
-/**#@+
+/**@{
* Database settings
*/
/** database host name or ip address */
$wgDBserver = 'localhost';
+/** database port number (for PostgreSQL) */
+$wgDBport = 5432;
/** name of the database */
-$wgDBname = 'wikidb';
+$wgDBname = 'my_wiki';
/** */
$wgDBconnection = '';
/** Database username */
$wgDBuser = 'wikiuser';
-/** Database type
- * "mysql" for working code and "PostgreSQL" for development/broken code
- */
-$wgDBtype = "mysql";
+/** Database user's password */
+$wgDBpassword = '';
+/** Database type */
+$wgDBtype = 'mysql';
+
+/** Separate username and password for maintenance tasks. Leave as null to use the default */
+$wgDBadminuser = null;
+$wgDBadminpassword = null;
+
/** Search type
* Leave as null to select the default search engine for the
- * selected database type (eg SearchMySQL4), or set to a class
+ * selected database type (eg SearchMySQL), or set to a class
* name to override to a custom search engine.
*/
$wgSearchType = null;
+
/** Table name prefix */
$wgDBprefix = '';
-/** Database schema
- * on some databases this allows separate
- * logical namespace for application data
+/** MySQL table options to use during installation or update */
+$wgDBTableOptions = 'ENGINE=InnoDB';
+
+/** Mediawiki schema */
+$wgDBmwschema = 'mediawiki';
+/** Tsearch2 schema */
+$wgDBts2schema = 'public';
+
+/** To override default SQLite data directory ($docroot/../data) */
+$wgSQLiteDataDir = '';
+
+/** Default directory mode for SQLite data directory on creation.
+ * Note that this is different from the default directory mode used
+ * elsewhere.
*/
-$wgDBschema = 'mediawiki';
-/**#@-*/
+$wgSQLiteDataDirMode = 0700;
+
+/**
+ * Make all database connections secretly go to localhost. Fool the load balancer
+ * thinking there is an arbitrarily large cluster of servers to connect to.
+ * Useful for debugging.
+ */
+$wgAllDBsAreLocalhost = false;
+
+/**@}*/
+/** Live high performance sites should disable this - some checks acquire giant mysql locks */
+$wgCheckDBSchema = true;
+
/**
- * Shared database for multiple wikis. Presently used for storing a user table
+ * Shared database for multiple wikis. Commonly used for storing a user table
* for single sign-on. The server for this database must be the same as for the
* main database.
+ * For backwards compatibility the shared prefix is set to the same as the local
+ * prefix, and the user table is listed in the default list of shared tables.
+ * The user_properties table is also added so that users will continue to have their
+ * preferences shared (preferences were stored in the user table prior to 1.16)
+ *
+ * $wgSharedTables may be customized with a list of tables to share in the shared
+ * datbase. However it is advised to limit what tables you do share as many of
+ * MediaWiki's tables may have side effects if you try to share them.
* EXPERIMENTAL
*/
-$wgSharedDB = null;
-
-# Database load balancer
-# This is a two-dimensional array, an array of server info structures
-# Fields are:
-# host: Host name
-# dbname: Default database name
-# user: DB user
-# password: DB password
-# type: "mysql" or "pgsql"
-# load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
-# groupLoads: array of load ratios, the key is the query group name. A query may belong
-# to several groups, the most specific group defined here is used.
-#
-# flags: bit field
-# DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
-# DBO_DEBUG -- equivalent of $wgDebugDumpSql
-# DBO_TRX -- wrap entire request in a transaction
-# DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
-# DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
-#
-# Leave at false to use the single-server variables above
+$wgSharedDB = null;
+$wgSharedPrefix = false; # Defaults to $wgDBprefix
+$wgSharedTables = array( 'user', 'user_properties' );
+
+/**
+ * Database load balancer
+ * This is a two-dimensional array, an array of server info structures
+ * Fields are:
+ * host: Host name
+ * dbname: Default database name
+ * user: DB user
+ * password: DB password
+ * type: "mysql" or "postgres"
+ * load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0
+ * groupLoads: array of load ratios, the key is the query group name. A query may belong
+ * to several groups, the most specific group defined here is used.
+ *
+ * flags: bit field
+ * DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended)
+ * DBO_DEBUG -- equivalent of $wgDebugDumpSql
+ * DBO_TRX -- wrap entire request in a transaction
+ * DBO_IGNORE -- ignore errors (not useful in LocalSettings.php)
+ * DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php)
+ *
+ * max lag: (optional) Maximum replication lag before a slave will taken out of rotation
+ * max threads: (optional) Maximum number of running threads
+ *
+ * These and any other user-defined properties will be assigned to the mLBInfo member
+ * variable of the Database object.
+ *
+ * Leave at false to use the single-server variables above. If you set this
+ * variable, the single-server variables will generally be ignored (except
+ * perhaps in some command-line scripts).
+ *
+ * The first server listed in this array (with key 0) will be the master. The
+ * rest of the servers will be slaves. To prevent writes to your slaves due to
+ * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your
+ * slaves in my.cnf. You can set read_only mode at runtime using:
+ *
+ * SET @@read_only=1;
+ *
+ * Since the effect of writing to a slave is so damaging and difficult to clean
+ * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even
+ * our masters, and then set read_only=0 on masters at runtime.
+ */
$wgDBservers = false;
+/**
+ * Load balancer factory configuration
+ * To set up a multi-master wiki farm, set the class here to something that
+ * can return a LoadBalancer with an appropriate master on a call to getMainLB().
+ * The class identified here is responsible for reading $wgDBservers,
+ * $wgDBserver, etc., so overriding it may cause those globals to be ignored.
+ *
+ * The LBFactory_Multi class is provided for this purpose, please see
+ * includes/db/LBFactory_Multi.php for configuration information.
+ */
+$wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' );
+
/** How long to wait for a slave to catch up to the master */
$wgMasterWaitTimeout = 10;
-/** File to log MySQL errors to */
+/** File to log database errors to */
$wgDBerrorLog = false;
/** When to give an error message */
$wgDBClusterTimeout = 10;
/**
- * wgDBminWordLen :
- * MySQL 3.x : used to discard words that MySQL will not return any results for
- * shorter values configure mysql directly.
- * MySQL 4.x : ignore it and configure mySQL
- * See: http://dev.mysql.com/doc/mysql/en/Fulltext_Fine-tuning.html
+ * Scale load balancer polling time so that under overload conditions, the database server
+ * receives a SHOW STATUS query at an average interval of this many microseconds
*/
-$wgDBminWordLen = 4;
+$wgDBAvgStatusPoll = 2000;
+
/** Set to true if using InnoDB tables */
$wgDBtransactions = false;
-/** Set to true to use enhanced fulltext search */
-$wgDBmysql4 = false;
+/** Set to true for compatibility with extensions that might be checking.
+ * MySQL 3.23.x is no longer supported. */
+$wgDBmysql4 = true;
/**
* Set to true to engage MySQL 4.1/5.0 charset-related features;
/**
* Other wikis on this site, can be administered from a single developer
* account.
- * Array, interwiki prefix => database name
+ * Array numeric key => database name
*/
-$wgLocalDatabases = array();
+$wgLocalDatabases = array();
-/**
+/** @{
* Object cache settings
* See Defines.php for types
*/
$wgMainCacheType = CACHE_NONE;
$wgMessageCacheType = CACHE_ANYTHING;
$wgParserCacheType = CACHE_ANYTHING;
+/**@}*/
+
+$wgParserCacheExpireTime = 86400;
+
+// Select which DBA handler <http://www.php.net/manual/en/dba.requirements.php> to use as CACHE_DBA backend
+$wgDBAhandler = 'db3';
$wgSessionsInMemcached = false;
-$wgLinkCacheMemcached = false; # Not fully tested
-/**
+/** This is used for setting php's session.save_handler. In practice, you will
+ * almost never need to change this ever. Other options might be 'user' or
+ * 'session_mysql.' Setting to null skips setting this entirely (which might be
+ * useful if you're doing cross-application sessions, see bug 11381) */
+$wgSessionHandler = 'files';
+
+/**@{
* Memcached-specific settings
* See docs/memcached.txt
*/
-$wgMemCachedDebug = false; # Will be set to false in Setup.php, if the server isn't working
+$wgUseMemCached = false;
+$wgMemCachedDebug = false; ///< Will be set to false in Setup.php, if the server isn't working
$wgMemCachedServers = array( '127.0.0.1:11000' );
-$wgMemCachedDebug = false;
+$wgMemCachedPersistent = false;
+$wgMemCachedTimeout = 100000; //Data timeout in microseconds
+/**@}*/
+/**
+ * Set this to true to make a local copy of the message cache, for use in
+ * addition to memcached. The files will be put in $wgCacheDirectory.
+ */
+$wgUseLocalMessageCache = false;
+
+/**
+ * Defines format of local cache
+ * true - Serialized object
+ * false - PHP source file (Warning - security risk)
+ */
+$wgLocalMessageCacheSerialized = true;
+/**
+ * Localisation cache configuration. Associative array with keys:
+ * class: The class to use. May be overridden by extensions.
+ *
+ * store: The location to store cache data. May be 'files', 'db' or
+ * 'detect'. If set to "files", data will be in CDB files. If set
+ * to "db", data will be stored to the database. If set to
+ * "detect", files will be used if $wgCacheDirectory is set,
+ * otherwise the database will be used.
+ *
+ * storeClass: The class name for the underlying storage. If set to a class
+ * name, it overrides the "store" setting.
+ *
+ * storeDirectory: If the store class puts its data in files, this is the
+ * directory it will use. If this is false, $wgCacheDirectory
+ * will be used.
+ *
+ * manualRecache: Set this to true to disable cache updates on web requests.
+ * Use maintenance/rebuildLocalisationCache.php instead.
+ */
+$wgLocalisationCacheConf = array(
+ 'class' => 'LocalisationCache',
+ 'store' => 'detect',
+ 'storeClass' => false,
+ 'storeDirectory' => false,
+ 'manualRecache' => false,
+);
# Language settings
#
/** Site language code, should be one of ./languages/Language(.*).php */
-$wgLanguageCode = 'en';
+$wgLanguageCode = 'en';
+
+/**
+ * Some languages need different word forms, usually for different cases.
+ * Used in Language::convertGrammar().
+ */
+$wgGrammarForms = array();
+#$wgGrammarForms['en']['genitive']['car'] = 'car\'s';
/** Treat language links as magic connectors, not inline links */
-$wgInterwikiMagic = true;
+$wgInterwikiMagic = true;
/** Hide interlanguage links from the sidebar */
$wgHideInterlanguageLinks = false;
+/** List of language names or overrides for default names in Names.php */
+$wgExtraLanguageNames = array();
+
+/**
+ * List of language codes that don't correspond to an actual language.
+ * These codes are leftoffs from renames, or other legacy things.
+ * Also, qqq is a dummy "language" for documenting messages.
+ */
+$wgDummyLanguageCodes = array( 'qqq', 'als', 'be-x-old', 'dk', 'fiu-vro', 'iu', 'nb', 'simple', 'tp' );
/** We speak UTF-8 all the time now, unless some oddities happen */
-$wgInputEncoding = 'UTF-8';
-$wgOutputEncoding = 'UTF-8';
-$wgEditEncoding = '';
-
-# Set this to eg 'ISO-8859-1' to perform character set
-# conversion when loading old revisions not marked with
-# "utf-8" flag. Use this when converting wiki to UTF-8
-# without the burdensome mass conversion of old text data.
-#
-# NOTE! This DOES NOT touch any fields other than old_text.
-# Titles, comments, user names, etc still must be converted
-# en masse in the database before continuing as a UTF-8 wiki.
+$wgInputEncoding = 'UTF-8';
+$wgOutputEncoding = 'UTF-8';
+$wgEditEncoding = '';
+
+/**
+ * Set this to true to replace Arabic presentation forms with their standard
+ * forms in the U+0600-U+06FF block. This only works if $wgLanguageCode is
+ * set to "ar".
+ *
+ * Note that pages with titles containing presentation forms will become
+ * inaccessible, run maintenance/cleanupTitles.php to fix this.
+ */
+$wgFixArabicUnicode = true;
+
+/**
+ * Set this to true to replace ZWJ-based chillu sequences in Malayalam text
+ * with their Unicode 5.1 equivalents. This only works if $wgLanguageCode is
+ * set to "ml". Note that some clients (even new clients as of 2010) do not
+ * support these characters.
+ *
+ * If you enable this on an existing wiki, run maintenance/cleanupTitles.php to
+ * fix any ZWJ sequences in existing page titles.
+ */
+$wgFixMalayalamUnicode = true;
+
+/**
+ * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132
+ * For Unix-like operating systems, set this to to a locale that has a UTF-8
+ * character set. Only the character set is relevant.
+ */
+$wgShellLocale = 'en_US.utf8';
+
+/**
+ * Set this to eg 'ISO-8859-1' to perform character set
+ * conversion when loading old revisions not marked with
+ * "utf-8" flag. Use this when converting wiki to UTF-8
+ * without the burdensome mass conversion of old text data.
+ *
+ * NOTE! This DOES NOT touch any fields other than old_text.
+ * Titles, comments, user names, etc still must be converted
+ * en masse in the database before continuing as a UTF-8 wiki.
+ */
$wgLegacyEncoding = false;
/**
*/
$wgLegacySchemaConversion = false;
-$wgMimeType = 'text/html';
-$wgJsMimeType = 'text/javascript';
-$wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
-$wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
+$wgMimeType = 'text/html';
+$wgJsMimeType = 'text/javascript';
+$wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN';
+$wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd';
+$wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml';
+
+/**
+ * Should we output an HTML5 doctype? This mode is still experimental, but
+ * all indications are that it should be usable, so it's enabled by default.
+ * If all goes well, it will be removed and become always true before the 1.16
+ * release.
+ */
+$wgHtml5 = true;
+
+/**
+ * Defines the value of the version attribute in the <html> tag, if any.
+ * Will be initialized later if not set explicitly.
+ */
+$wgHtml5Version = null;
+
+/**
+ * Enabled RDFa attributes for use in wikitext.
+ * NOTE: Interaction with HTML5 is somewhat underspecified.
+ */
+$wgAllowRdfaAttributes = false;
+
+/**
+ * Enabled HTML5 microdata attributes for use in wikitext, if $wgHtml5 is also true.
+ */
+$wgAllowMicrodataAttributes = false;
+
+/**
+ * Should we try to make our HTML output well-formed XML? If set to false,
+ * output will be a few bytes shorter, and the HTML will arguably be more
+ * readable. If set to true, life will be much easier for the authors of
+ * screen-scraping bots, and the HTML will arguably be more readable.
+ *
+ * Setting this to false may omit quotation marks on some attributes, omit
+ * slashes from some self-closing tags, omit some ending tags, etc., where
+ * permitted by HTML5. Setting it to true will not guarantee that all pages
+ * will be well-formed, although non-well-formed pages should be rare and it's
+ * a bug if you find one. Conversely, setting it to false doesn't mean that
+ * all XML-y constructs will be omitted, just that they might be.
+ *
+ * Because of compatibility with screen-scraping bots, and because it's
+ * controversial, this is currently left to true by default.
+ */
+$wgWellFormedXml = true;
+
+/**
+ * Permit other namespaces in addition to the w3.org default.
+ * Use the prefix for the key and the namespace for the value. For
+ * example:
+ * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg';
+ * Normally we wouldn't have to define this in the root <html>
+ * element, but IE needs it there in some circumstances.
+ */
+$wgXhtmlNamespaces = array();
/** Enable to allow rewriting dates in page text.
* DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES */
*/
$wgTranslateNumerals = true;
-
-# Translation using MediaWiki: namespace
-# This will increase load times by 25-60% unless memcached is installed
-# Interface messages will be loaded from the database.
+/**
+ * Translation using MediaWiki: namespace.
+ * Interface messages will be loaded from the database.
+ */
$wgUseDatabaseMessages = true;
+
+/**
+ * Expiry time for the message cache key
+ */
$wgMsgCacheExpiry = 86400;
-# Whether to enable language variant conversion.
+/**
+ * Maximum entry size in the message cache, in bytes
+ */
+$wgMaxMsgCacheEntrySize = 10000;
+
+/**
+ * If true, serialized versions of the messages arrays will be
+ * read from the 'serialized' subdirectory if they are present.
+ * Set to false to always use the Messages files, regardless of
+ * whether they are up to date or not.
+ */
+$wgEnableSerializedMessages = true;
+
+/**
+ * Set to false if you are thorough system admin who always remembers to keep
+ * serialized files up to date to save few mtime calls.
+ */
+$wgCheckSerialized = true;
+
+/** Whether to enable language variant conversion. */
$wgDisableLangConversion = false;
-# Use article validation feature; turned off by default
-$wgUseValidation = false;
-$wgValidationForAnons = true ;
+/** Whether to enable language variant conversion for links. */
+$wgDisableTitleConversion = false;
+
+/** Default variant code, if false, the default will be the language code */
+$wgDefaultLanguageVariant = false;
+
+/** Disabled variants array of language variant conversion.
+ * example:
+ * $wgDisabledVariants[] = 'zh-mo';
+ * $wgDisabledVariants[] = 'zh-my';
+ *
+ * or:
+ * $wgDisabledVariants = array('zh-mo', 'zh-my');
+ */
+$wgDisabledVariants = array();
+
+/**
+ * Like $wgArticlePath, but on multi-variant wikis, this provides a
+ * path format that describes which parts of the URL contain the
+ * language variant. For Example:
+ *
+ * $wgLanguageCode = 'sr';
+ * $wgVariantArticlePath = '/$2/$1';
+ * $wgArticlePath = '/wiki/$1';
+ *
+ * A link to /wiki/ would be redirected to /sr/Главна_страна
+ *
+ * It is important that $wgArticlePath not overlap with possible values
+ * of $wgVariantArticlePath.
+ */
+$wgVariantArticlePath = false;///< defaults to false
+
+/**
+ * Show a bar of language selection links in the user login and user
+ * registration forms; edit the "loginlanguagelinks" message to
+ * customise these
+ */
+$wgLoginLanguageSelector = false;
-# Whether to use zhdaemon to perform Chinese text processing
-# zhdaemon is under developement, so normally you don't want to
-# use it unless for testing
+/**
+ * Whether to use zhdaemon to perform Chinese text processing
+ * zhdaemon is under developement, so normally you don't want to
+ * use it unless for testing
+ */
$wgUseZhdaemon = false;
$wgZhdaemonHost="localhost";
$wgZhdaemonPort=2004;
-/** Normally you can ignore this and it will be something
- like $wgMetaNamespace . "_talk". In some languages, you
- may want to set this manually for grammatical reasons.
- It is currently only respected by those languages
- where it might be relevant and where no automatic
- grammar converter exists.
-*/
-$wgMetaNamespaceTalk = false;
# Miscellaneous configuration settings
#
$wgLocalInterwiki = 'w';
$wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table
+/** Interwiki caching settings.
+ $wgInterwikiCache specifies path to constant database file
+ This cdb database is generated by dumpInterwiki from maintenance
+ and has such key formats:
+ dbname:key - a simple key (e.g. enwiki:meta)
+ _sitename:key - site-scope key (e.g. wiktionary:meta)
+ __global:key - global-scope key (e.g. __global:meta)
+ __sites:dbname - site mapping (e.g. __sites:enwiki)
+ Sites mapping just specifies site name, other keys provide
+ "local url" data layout.
+ $wgInterwikiScopes specify number of domains to check for messages:
+ 1 - Just wiki(db)-level
+ 2 - wiki and global levels
+ 3 - site levels
+ $wgInterwikiFallbackSite - if unable to resolve from cache
+ */
+$wgInterwikiCache = false;
+$wgInterwikiScopes = 3;
+$wgInterwikiFallbackSite = 'wiki';
+
/**
* If local interwikis are set up which allow redirects,
* set this regexp to restrict URLs which will be displayed
$wgShowIPinHeader = true; # For non-logged in users
-$wgMaxNameChars = 255; # Maximum number of bytes in username
+$wgMaxSigChars = 255; # Maximum number of Unicode characters in signature
+$wgMaxArticleSize = 2048; # Maximum article size in kilobytes
+# Maximum number of bytes in username. You want to run the maintenance
+# script ./maintenancecheckUsernames.php once you have changed this value
+$wgMaxNameChars = 255;
+
+$wgMaxPPNodeCount = 1000000; # A complexity limit on template expansion
+
+/**
+ * Maximum recursion depth for templates within templates.
+ * The current parser adds two levels to the PHP call stack for each template,
+ * and xdebug limits the call stack to 100 by default. So this should hopefully
+ * stop the parser before it hits the xdebug limit.
+ */
+$wgMaxTemplateDepth = 40;
+$wgMaxPPExpandDepth = 40;
+
+/**
+ * If true, removes (substitutes) templates in "~~~~" signatures.
+ */
+$wgCleanSignatures = true;
$wgExtraSubtitle = '';
$wgSiteSupportPage = ''; # A page where you users can receive donations
-$wgReadOnlyFile = "{$wgUploadDirectory}/lock_yBgMBwiR";
+/**
+ * Set this to a string to put the wiki into read-only mode. The text will be
+ * used as an explanation to users.
+ *
+ * This prevents most write operations via the web interface. Cache updates may
+ * still be possible. To prevent database writes completely, use the read_only
+ * option in MySQL.
+ */
+$wgReadOnly = null;
+
+/***
+ * If this lock file exists (size > 0), the wiki will be forced into read-only mode.
+ * Its contents will be shown to users as part of the read-only warning
+ * message.
+ */
+$wgReadOnlyFile = false; ///< defaults to "{$wgUploadDirectory}/lock_yBgMBwiR";
/**
+ * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug
* The debug log file should be not be publicly accessible if it is used, as it
- * may contain private data. */
+ * may contain private data.
+ */
$wgDebugLogFile = '';
-/**#@+
- * @global bool
+/**
+ * Prefix for debug log lines
+ */
+$wgDebugLogPrefix = '';
+
+/**
+ * If true, instead of redirecting, show a page with a link to the redirect
+ * destination. This allows for the inspection of PHP error messages, and easy
+ * resubmission of form data. For developer use only.
*/
$wgDebugRedirects = false;
-$wgDebugRawPage = false; # Avoid overlapping debug entries by leaving out CSS
+/**
+ * If true, log debugging data from action=raw.
+ * This is normally false to avoid overlapping debug entries due to gen=css and
+ * gen=js requests.
+ */
+$wgDebugRawPage = false;
+
+/**
+ * Send debug data to an HTML comment in the output.
+ *
+ * This may occasionally be useful when supporting a non-technical end-user. It's
+ * more secure than exposing the debug log file to the web, since the output only
+ * contains private data for the current user. But it's not ideal for development
+ * use since data is lost on fatal errors and redirects.
+ */
$wgDebugComments = false;
-$wgReadOnly = null;
-$wgLogQueries = false;
+
+/**
+ * Write SQL queries to the debug log
+ */
$wgDebugDumpSql = false;
/**
* Set to an array of log group keys to filenames.
- * If set, wfDebugLog() output for that group will go to that file instead
+ * If set, wfDebugLog() output for that group will go to that file instead
* of the regular $wgDebugLogFile. Useful for enabling selective logging
* in production.
*/
$wgDebugLogGroups = array();
/**
- * Whether to show "we're sorry, but there has been a database error" pages.
- * Displaying errors aids in debugging, but may display information useful
- * to an attacker.
+ * Display debug data at the bottom of the main content area.
+ *
+ * Useful for developers and technical users trying to working on a closed wiki.
*/
-$wgShowSQLErrors = false;
-
-# Should [[Category:Dog]] on a page associate it with the
-# category "Dog"? (a link to that category page will be
-# added to the article, clicking it reveals a list of
-# all articles in the category)
-$wgUseCategoryMagic = true;
+$wgShowDebug = false;
/**
- * disable experimental dmoz-like category browsing. Output things like:
- * Encyclopedia > Music > Style of Music > Jazz
+ * Prefix debug messages with relative timestamp. Very-poor man's profiler.
*/
-$wgUseCategoryBrowser = false;
+$wgDebugTimestamps = false;
/**
- * Keep parsed pages in a cache (objectcache table, turck, or memcached)
- * to speed up output of the same page viewed by another user with the
- * same options.
- *
- * This can provide a significant speedup for medium to large pages,
- * so you probably want to keep it on.
+ * Print HTTP headers for every request in the debug information.
*/
-$wgEnableParserCache = true;
+$wgDebugPrintHttpHeaders = true;
+
+/**
+ * Show the contents of $wgHooks in Special:Version
+ */
+$wgSpecialVersionShowHooks = false;
+
+/**
+ * Whether to show "we're sorry, but there has been a database error" pages.
+ * Displaying errors aids in debugging, but may display information useful
+ * to an attacker.
+ */
+$wgShowSQLErrors = false;
+
+/**
+ * If true, some error messages will be colorized when running scripts on the
+ * command line; this can aid picking important things out when debugging.
+ * Ignored when running on Windows or when output is redirected to a file.
+ */
+$wgColorErrors = true;
+
+/**
+ * If set to true, uncaught exceptions will print a complete stack trace
+ * to output. This should only be used for debugging, as it may reveal
+ * private information in function parameters due to PHP's backtrace
+ * formatting.
+ */
+$wgShowExceptionDetails = false;
+
+/**
+ * If true, show a backtrace for database errors
+ */
+$wgShowDBErrorBacktrace = false;
+
+/**
+ * Expose backend server host names through the API and various HTML comments
+ */
+$wgShowHostnames = false;
+
+/**
+ * If set to true MediaWiki will throw notices for some possible error
+ * conditions and for deprecated functions.
+ */
+$wgDevelopmentWarnings = false;
+
+/**
+ * Use experimental, DMOZ-like category browser
+ */
+$wgUseCategoryBrowser = false;
+
+/**
+ * Keep parsed pages in a cache (objectcache table or memcached)
+ * to speed up output of the same page viewed by another user with the
+ * same options.
+ *
+ * This can provide a significant speedup for medium to large pages,
+ * so you probably want to keep it on. Extensions that conflict with the
+ * parser cache should disable the cache on a per-page basis instead.
+ */
+$wgEnableParserCache = true;
+
+/**
+ * Append a configured value to the parser cache and the sitenotice key so
+ * that they can be kept separate for some class of activity.
+ */
+$wgRenderHashAppend = '';
+
+/**
+ * If on, the sidebar navigation links are cached for users with the
+ * current language set. This can save a touch of load on a busy site
+ * by shaving off extra message lookups.
+ *
+ * However it is also fragile: changing the site configuration, or
+ * having a variable $wgArticlePath, can produce broken links that
+ * don't update as expected.
+ */
+$wgEnableSidebarCache = false;
+
+/**
+ * Expiry time for the sidebar cache, in seconds
+ */
+$wgSidebarCacheExpiry = 86400;
/**
* Under which condition should a page in the main namespace be counted
* as a valid article? If $wgUseCommaCount is set to true, it will be
* counted if it contains at least one comma. If it is set to false
* (default), it will only be counted if it contains at least one [[wiki
- * link]]. See http://meta.wikimedia.org/wiki/Help:Article_count
+ * link]]. See http://www.mediawiki.org/wiki/Manual:Article_count
*
* Retroactively changing this variable will not affect
* the existing count (cf. maintenance/recount.sql).
-*/
+ */
$wgUseCommaCount = false;
-/**#@-*/
-
/**
* wgHitcounterUpdateFreq sets how often page counters should be updated, higher
* values are easier on the database. A value of 1 causes the counters to be
* updated on every hit, any higher value n cause them to update *on average*
* every n hits. Should be set to either 1 or something largish, eg 1000, for
* maximum efficiency.
-*/
+ */
$wgHitcounterUpdateFreq = 1;
-# User rights settings
-#
-# It's not 100% safe, there could be security hole using that one. Use at your
-# own risks.
-
-$wgWhitelistRead = false; # Pages anonymous user may see, like: = array ( "Main Page", "Special:Userlogin", "Wikipedia:Help");
-
-$wgAllowAnonymousMinor = false; # Allow anonymous users to mark changes as 'minor'
-
+# Basic user rights and block settings
$wgSysopUserBans = true; # Allow sysops to ban logged-in users
-$wgSysopRangeBans = true; # Allow sysops to ban IP ranges
+$wgSysopRangeBans = true; # Allow sysops to ban IP ranges
+$wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
+$wgBlockAllowsUTEdit = false; # Default setting for option on block form to allow self talkpage editing whilst blocked
+$wgSysopEmailBans = true; # Allow sysops to ban users from accessing Emailuser
+$wgBlockCIDRLimit = array(
+ 'IPv4' => 16, # Blocks larger than a /16 (64k addresses) will not be allowed
+ 'IPv6' => 64, # 2^64 = ~1.8x10^19 addresses
+);
+
+/**
+ * If true, blocked users will not be allowed to login. When using this with
+ * a public wiki, the effect of logging out blocked users may actually be
+ * avers: unless the user's address is also blocked (e.g. auto-block),
+ * logging the user out will again allow reading and editing, just as for
+ * anonymous visitors.
+ */
+$wgBlockDisablesLogin = false; #
+
+# Pages anonymous user may see as an array, e.g.:
+# array ( "Main Page", "Wikipedia:Help");
+# Special:Userlogin and Special:Resetpass are always whitelisted.
+# NOTE: This will only work if $wgGroupPermissions['*']['read']
+# is false -- see below. Otherwise, ALL pages are accessible,
+# regardless of this setting.
+# Also note that this will only protect _pages in the wiki_.
+# Uploaded files will remain readable. Make your upload
+# directory name unguessable, or use .htaccess to protect it.
+$wgWhitelistRead = false;
-$wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire
-$wgBlockAllowsUTEdit = false; # Blocks allow users to edit their own user talk page
+/**
+ * Should editors be required to have a validated e-mail
+ * address before being allowed to edit?
+ */
+$wgEmailConfirmToEdit=false;
/**
* Permission keys given to users in each group.
* combined with the permissions of all groups that a given user is listed
* in in the user_groups table.
*
+ * Note: Don't set $wgGroupPermissions = array(); unless you know what you're
+ * doing! This will wipe all permissions, and may mean that your users are
+ * unable to perform certain essential tasks or access new functionality
+ * when new permissions are introduced and default grants established.
+ *
+ * Functionality to make pages inaccessible has not been extensively tested
+ * for security. Use at your own risk!
+ *
* This replaces wgWhitelistAccount and wgWhitelistEdit
*/
$wgGroupPermissions = array();
-$wgGroupPermissions['*' ]['createaccount'] = true;
-$wgGroupPermissions['*' ]['read'] = true;
-$wgGroupPermissions['*' ]['edit'] = true;
-
-$wgGroupPermissions['user' ]['move'] = true;
-$wgGroupPermissions['user' ]['read'] = true;
-$wgGroupPermissions['user' ]['edit'] = true;
-$wgGroupPermissions['user' ]['upload'] = true;
-
-$wgGroupPermissions['bot' ]['bot'] = true;
-
-$wgGroupPermissions['sysop']['block'] = true;
-$wgGroupPermissions['sysop']['createaccount'] = true;
-$wgGroupPermissions['sysop']['delete'] = true;
-$wgGroupPermissions['sysop']['editinterface'] = true;
-$wgGroupPermissions['sysop']['import'] = true;
-$wgGroupPermissions['sysop']['importupload'] = true;
-$wgGroupPermissions['sysop']['move'] = true;
-$wgGroupPermissions['sysop']['patrol'] = true;
-$wgGroupPermissions['sysop']['protect'] = true;
-$wgGroupPermissions['sysop']['rollback'] = true;
-$wgGroupPermissions['sysop']['upload'] = true;
-
-$wgGroupPermissions['bureaucrat']['userrights'] = true;
-// Used by the Special:Renameuser extension
-$wgGroupPermissions['bureaucrat']['renameuser'] = true;
+// Implicit group for all visitors
+$wgGroupPermissions['*']['createaccount'] = true;
+$wgGroupPermissions['*']['read'] = true;
+$wgGroupPermissions['*']['edit'] = true;
+$wgGroupPermissions['*']['createpage'] = true;
+$wgGroupPermissions['*']['createtalk'] = true;
+$wgGroupPermissions['*']['writeapi'] = true;
+//$wgGroupPermissions['*']['patrolmarks'] = false; // let anons see what was patrolled
+
+// Implicit group for all logged-in accounts
+$wgGroupPermissions['user']['move'] = true;
+$wgGroupPermissions['user']['move-subpages'] = true;
+$wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages
+//$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns
+$wgGroupPermissions['user']['read'] = true;
+$wgGroupPermissions['user']['edit'] = true;
+$wgGroupPermissions['user']['createpage'] = true;
+$wgGroupPermissions['user']['createtalk'] = true;
+$wgGroupPermissions['user']['writeapi'] = true;
+$wgGroupPermissions['user']['upload'] = true;
+$wgGroupPermissions['user']['reupload'] = true;
+$wgGroupPermissions['user']['reupload-shared'] = true;
+$wgGroupPermissions['user']['minoredit'] = true;
+$wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok"
+$wgGroupPermissions['user']['sendemail'] = true;
+
+// Implicit group for accounts that pass $wgAutoConfirmAge
+$wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true;
+
+// Users with bot privilege can have their edits hidden
+// from various log pages by default
+$wgGroupPermissions['bot']['bot'] = true;
+$wgGroupPermissions['bot']['autoconfirmed'] = true;
+$wgGroupPermissions['bot']['nominornewtalk'] = true;
+$wgGroupPermissions['bot']['autopatrol'] = true;
+$wgGroupPermissions['bot']['suppressredirect'] = true;
+$wgGroupPermissions['bot']['apihighlimits'] = true;
+$wgGroupPermissions['bot']['writeapi'] = true;
+#$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled
+
+// Most extra permission abilities go to this group
+$wgGroupPermissions['sysop']['block'] = true;
+$wgGroupPermissions['sysop']['createaccount'] = true;
+$wgGroupPermissions['sysop']['delete'] = true;
+$wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs
+$wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text
+$wgGroupPermissions['sysop']['deletedtext'] = true; // can view deleted revision text
+$wgGroupPermissions['sysop']['undelete'] = true;
+$wgGroupPermissions['sysop']['editinterface'] = true;
+$wgGroupPermissions['sysop']['editusercss'] = true;
+$wgGroupPermissions['sysop']['edituserjs'] = true;
+$wgGroupPermissions['sysop']['import'] = true;
+$wgGroupPermissions['sysop']['importupload'] = true;
+$wgGroupPermissions['sysop']['move'] = true;
+$wgGroupPermissions['sysop']['move-subpages'] = true;
+$wgGroupPermissions['sysop']['move-rootuserpages'] = true;
+$wgGroupPermissions['sysop']['patrol'] = true;
+$wgGroupPermissions['sysop']['autopatrol'] = true;
+$wgGroupPermissions['sysop']['protect'] = true;
+$wgGroupPermissions['sysop']['proxyunbannable'] = true;
+$wgGroupPermissions['sysop']['rollback'] = true;
+$wgGroupPermissions['sysop']['trackback'] = true;
+$wgGroupPermissions['sysop']['upload'] = true;
+$wgGroupPermissions['sysop']['reupload'] = true;
+$wgGroupPermissions['sysop']['reupload-shared'] = true;
+$wgGroupPermissions['sysop']['unwatchedpages'] = true;
+$wgGroupPermissions['sysop']['autoconfirmed'] = true;
+$wgGroupPermissions['sysop']['upload_by_url'] = true;
+$wgGroupPermissions['sysop']['ipblock-exempt'] = true;
+$wgGroupPermissions['sysop']['blockemail'] = true;
+$wgGroupPermissions['sysop']['markbotedits'] = true;
+$wgGroupPermissions['sysop']['apihighlimits'] = true;
+$wgGroupPermissions['sysop']['browsearchive'] = true;
+$wgGroupPermissions['sysop']['noratelimit'] = true;
+$wgGroupPermissions['sysop']['versiondetail'] = true;
+$wgGroupPermissions['sysop']['movefile'] = true;
+#$wgGroupPermissions['sysop']['mergehistory'] = true;
+
+// Permission to change users' group assignments
+$wgGroupPermissions['bureaucrat']['userrights'] = true;
+$wgGroupPermissions['bureaucrat']['noratelimit'] = true;
+// Permission to change users' groups assignments across wikis
+#$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true;
+// Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth
+#$wgGroupPermissions['bureaucrat']['override-export-depth'] = true;
+
+#$wgGroupPermissions['sysop']['deleterevision'] = true;
+// To hide usernames from users and Sysops
+#$wgGroupPermissions['suppress']['hideuser'] = true;
+// To hide revisions/log items from users and Sysops
+#$wgGroupPermissions['suppress']['suppressrevision'] = true;
+// For private suppression log access
+#$wgGroupPermissions['suppress']['suppressionlog'] = true;
/**
* The developer group is deprecated, but can be activated if need be
*/
# $wgGroupPermissions['developer']['siteadmin'] = true;
+/**
+ * Permission keys revoked from users in each group.
+ * This acts the same way as wgGroupPermissions above, except that
+ * if the user is in a group here, the permission will be removed from them.
+ *
+ * Improperly setting this could mean that your users will be unable to perform
+ * certain essential tasks, so use at your own risk!
+ */
+$wgRevokePermissions = array();
+
+/**
+ * Implicit groups, aren't shown on Special:Listusers or somewhere else
+ */
+$wgImplicitGroups = array( '*', 'user', 'autoconfirmed' );
+
+/**
+ * A map of group names that the user is in, to group names that those users
+ * are allowed to add or revoke.
+ *
+ * Setting the list of groups to add or revoke to true is equivalent to "any group".
+ *
+ * For example, to allow sysops to add themselves to the "bot" group:
+ *
+ * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) );
+ *
+ * Implicit groups may be used for the source group, for instance:
+ *
+ * $wgGroupsRemoveFromSelf = array( '*' => true );
+ *
+ * This allows users in the '*' group (i.e. any user) to remove themselves from
+ * any group that they happen to be in.
+ *
+ */
+$wgGroupsAddToSelf = array();
+$wgGroupsRemoveFromSelf = array();
+
+/**
+ * Set of available actions that can be restricted via action=protect
+ * You probably shouldn't change this.
+ * Translated through restriction-* messages.
+ */
+$wgRestrictionTypes = array( 'edit', 'move' );
+
+/**
+ * Rights which can be required for each protection level (via action=protect)
+ *
+ * You can add a new protection level that requires a specific
+ * permission by manipulating this array. The ordering of elements
+ * dictates the order on the protection form's lists.
+ *
+ * '' will be ignored (i.e. unprotected)
+ * 'sysop' is quietly rewritten to 'protect' for backwards compatibility
+ */
+$wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' );
+
+/**
+ * Set the minimum permissions required to edit pages in each
+ * namespace. If you list more than one permission, a user must
+ * have all of them to edit pages in that namespace.
+ *
+ * Note: NS_MEDIAWIKI is implicitly restricted to editinterface.
+ */
+$wgNamespaceProtection = array();
+
+/**
+ * Pages in namespaces in this array can not be used as templates.
+ * Elements must be numeric namespace ids.
+ * Among other things, this may be useful to enforce read-restrictions
+ * which may otherwise be bypassed by using the template machanism.
+ */
+$wgNonincludableNamespaces = array();
+
+/**
+ * Number of seconds an account is required to age before
+ * it's given the implicit 'autoconfirm' group membership.
+ * This can be used to limit privileges of new accounts.
+ *
+ * Accounts created by earlier versions of the software
+ * may not have a recorded creation date, and will always
+ * be considered to pass the age test.
+ *
+ * When left at 0, all registered accounts will pass.
+ */
+$wgAutoConfirmAge = 0;
+//$wgAutoConfirmAge = 600; // ten minutes
+//$wgAutoConfirmAge = 3600*24; // one day
+
+# Number of edits an account requires before it is autoconfirmed
+# Passing both this AND the time requirement is needed
+$wgAutoConfirmCount = 0;
+//$wgAutoConfirmCount = 50;
+
+/**
+ * Automatically add a usergroup to any user who matches certain conditions.
+ * The format is
+ * array( '&' or '|' or '^', cond1, cond2, ... )
+ * where cond1, cond2, ... are themselves conditions; *OR*
+ * APCOND_EMAILCONFIRMED, *OR*
+ * array( APCOND_EMAILCONFIRMED ), *OR*
+ * array( APCOND_EDITCOUNT, number of edits ), *OR*
+ * array( APCOND_AGE, seconds since registration ), *OR*
+ * array( APCOND_INGROUPS, group1, group2, ... ), *OR*
+ * array( APCOND_ISIP, ip ), *OR*
+ * array( APCOND_IPINRANGE, range ), *OR*
+ * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR*
+ * array( APCOND_BLOCKED ), *OR*
+ * similar constructs defined by extensions.
+ *
+ * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any
+ * user who has provided an e-mail address.
+ */
+$wgAutopromote = array(
+ 'autoconfirmed' => array( '&',
+ array( APCOND_EDITCOUNT, &$wgAutoConfirmCount ),
+ array( APCOND_AGE, &$wgAutoConfirmAge ),
+ ),
+);
+
+/**
+ * These settings can be used to give finer control over who can assign which
+ * groups at Special:Userrights. Example configuration:
+ *
+ * // Bureaucrat can add any group
+ * $wgAddGroups['bureaucrat'] = true;
+ * // Bureaucrats can only remove bots and sysops
+ * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' );
+ * // Sysops can make bots
+ * $wgAddGroups['sysop'] = array( 'bot' );
+ * // Sysops can disable other sysops in an emergency, and disable bots
+ * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' );
+ */
+$wgAddGroups = array();
+$wgRemoveGroups = array();
+
+/**
+ * A list of available rights, in addition to the ones defined by the core.
+ * For extensions only.
+ */
+$wgAvailableRights = array();
+/**
+ * Optional to restrict deletion of pages with higher revision counts
+ * to users with the 'bigdelete' permission. (Default given to sysops.)
+ */
+$wgDeleteRevisionsLimit = 0;
# Proxy scanner settings
#
/** Port we want to scan for a proxy */
$wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 );
/** Script used to scan */
-$wgProxyScriptPath = "$IP/proxy_check.php";
+$wgProxyScriptPath = "$IP/includes/proxy_check.php";
/** */
$wgProxyMemcExpiry = 86400;
/** This should always be customised in LocalSettings.php */
/**
* Set this to current time to invalidate all prior cached pages. Affects both
* client- and server-side caching.
+ * You can get the current date on your server by using the command:
+ * date +%Y%m%d%H%M%S
*/
$wgCacheEpoch = '20030516000000';
+/**
+ * Bump this number when changing the global style sheets and JavaScript.
+ * It should be appended in the query string of static CSS and JS includes,
+ * to ensure that client-side caches do not keep obsolete copies of global
+ * styles.
+ */
+$wgStyleVersion = '270';
+
# Server-side caching:
* Must set $wgShowIPinHeader = false
*/
$wgUseFileCache = false;
+
/** Directory where the cached page will be saved */
-$wgFileCacheDirectory = "{$wgUploadDirectory}/cache";
+$wgFileCacheDirectory = false; ///< defaults to "$wgCacheDirectory/html";
/**
* When using the file cache, we can store the cached HTML gzipped to save disk
*/
$wgUseGzip = false;
+/** Whether MediaWiki should send an ETag header */
+$wgUseETag = false;
+
# Email notification settings
#
$wgEnotifMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails.
# # Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified)
+# Send a generic mail instead of a personalised mail for each user. This
+# always uses UTC as the time zone, and doesn't include the username.
+#
+# For pages with many users watching, this can significantly reduce mail load.
+# Has no effect when using sendmail rather than SMTP;
+
+$wgEnotifImpersonal = false;
+
+# Maximum number of users to mail at once when using impersonal mail. Should
+# match the limit on your mail server.
+$wgEnotifMaxRecips = 500;
+
+# Send mails via the job queue.
+$wgEnotifUseJobQ = false;
+
+# Use real name instead of username in e-mail "from" field
+$wgEnotifUseRealName = false;
+
+/**
+ * Array of usernames who will be sent a notification email for every change which occurs on a wiki
+ */
+$wgUsersNotifiedOnAllChanges = array();
/** Show watching users in recent changes, watchlist and page history views */
$wgRCShowWatchingUsers = false; # UPO
/** Show watching users in Page views */
$wgPageShowWatchingUsers = false;
+/** Show the amount of changed characters in recent changes */
+$wgRCShowChangedSize = true;
+
+/**
+ * If the difference between the character counts of the text
+ * before and after the edit is below that value, the value will be
+ * highlighted on the RC page.
+ */
+$wgRCChangedSizeThreshold = 500;
+
/**
* Show "Updated (since my last visit)" marker in RC view, watchlist and history
* view for watched pages with new changes */
$wgShowUpdatedMarker = true;
-$wgCookieExpiration = 2592000;
+/**
+ * Default cookie expiration time. Setting to 0 makes all cookies session-only.
+ */
+$wgCookieExpiration = 30*86400;
/** Clock skew or the one-second resolution of time() can occasionally cause cache
* problems when the user requests two pages within a short period of time. This
/** If you run Squid3 with ESI support, enable this (default:false): */
$wgUseESI = false;
+/** Send X-Vary-Options header for better caching (requires patched Squid) */
+$wgUseXVO = false;
+
/** Internal server name as known to Squid, if different */
# $wgInternalServer = 'http://yourinternal.tld:8000';
$wgInternalServer = $wgServer;
$wgSquidMaxage = 18000;
/**
- * A list of proxy servers (ips if possible) to purge on changes don't specify
- * ports here (80 is default)
+ * Default maximum age for raw CSS/JS accesses
+ */
+$wgForcedRawSMaxage = 300;
+
+/**
+ * List of proxy servers to purge on changes; default port is 80. Use IP addresses.
+ *
+ * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For
+ * headers sent/modified from these proxies when obtaining the remote IP address
+ *
+ * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge.
*/
-# $wgSquidServers = array('127.0.0.1');
$wgSquidServers = array();
+
+/**
+ * As above, except these servers aren't purged on page changes; use to set a
+ * list of trusted proxies, etc.
+ */
$wgSquidServersNoPurge = array();
/** Maximum number of titles to purge in any one client operation */
$wgHTCPPort = 4827;
$wgHTCPMulticastTTL = 1;
# $wgHTCPMulticastAddress = "224.0.0.85";
+$wgHTCPMulticastAddress = false;
+
+/** Should forwarded Private IPs be accepted? */
+$wgUsePrivateIPs = false;
# Cookie settings:
#
*/
$wgCookieDomain = '';
$wgCookiePath = '/';
+$wgCookieSecure = ($wgProto == 'https');
$wgDisableCookieCheck = false;
+/**
+ * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of
+ * using the database name.
+ */
+$wgCookiePrefix = false;
+
+/**
+ * Set authentication cookies to HttpOnly to prevent access by JavaScript,
+ * in browsers that support this feature. This can mitigates some classes of
+ * XSS attack.
+ *
+ * Only supported on PHP 5.2 or higher.
+ */
+$wgCookieHttpOnly = version_compare("5.2", PHP_VERSION, "<");
+
+/**
+ * If the requesting browser matches a regex in this blacklist, we won't
+ * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on.
+ */
+$wgHttpOnlyBlacklist = array(
+ // Internet Explorer for Mac; sometimes the cookies work, sometimes
+ // they don't. It's difficult to predict, as combinations of path
+ // and expiration options affect its parsing.
+ '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
+);
+
+/** A list of cookies that vary the cache (for use by extensions) */
+$wgCacheVaryCookies = array();
+
+/** Override to customise the session name */
+$wgSessionName = false;
+
/** Whether to allow inline image pointing to other websites */
-$wgAllowExternalImages = true;
+$wgAllowExternalImages = false;
+
+/** If the above is false, you can specify an exception here. Image URLs
+ * that start with this string are then rendered, while all others are not.
+ * You can use this to set up a trusted, simple repository of images.
+ * You may also specify an array of strings to allow multiple sites
+ *
+ * Examples:
+ * $wgAllowExternalImagesFrom = 'http://127.0.0.1/';
+ * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' );
+ */
+$wgAllowExternalImagesFrom = '';
+
+/** If $wgAllowExternalImages is false, you can allow an on-wiki
+ * whitelist of regular expression fragments to match the image URL
+ * against. If the image matches one of the regular expression fragments,
+ * The image will be displayed.
+ *
+ * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist)
+ * Or false to disable it
+ */
+$wgEnableImageWhitelist = true;
+
+/** Allows to move images and other media files */
+$wgAllowImageMoving = true;
/** Disable database-intensive features */
$wgMiserMode = false;
/** Disable all query pages if miser mode is on, not just some */
$wgDisableQueryPages = false;
-/** Generate a watchlist once every hour or so */
-$wgUseWatchlistCache = false;
-/** The hour or so mentioned above */
-$wgWLCacheTimeout = 3600;
-/** Minimum number of links to a page required before it appears on Special:Wantedpages */
+/** Number of rows to cache in 'querycache' table when miser mode is on */
+$wgQueryCacheLimit = 1000;
+/** Number of links to a page required before it is deemed "wanted" */
$wgWantedPagesThreshold = 1;
+/** Enable slow parser functions */
+$wgAllowSlowParserFunctions = false;
+
+/**
+ * Maps jobs to their handling classes; extensions
+ * can add to this to provide custom jobs
+ */
+$wgJobClasses = array(
+ 'refreshLinks' => 'RefreshLinksJob',
+ 'refreshLinks2' => 'RefreshLinksJob2',
+ 'htmlCacheUpdate' => 'HTMLCacheUpdateJob',
+ 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible
+ 'sendMail' => 'EmaillingJob',
+ 'enotifNotify' => 'EnotifNotifyJob',
+ 'fixDoubleRedirect' => 'DoubleRedirectJob',
+);
+
+/**
+ * Additional functions to be performed with updateSpecialPages.
+ * Expensive Querypages are already updated.
+ */
+$wgSpecialPageCacheUpdates = array(
+ 'Statistics' => array('SiteStatsUpdate','cacheUpdate')
+);
/**
* To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of
$wgUseTeX = false;
/** Location of the texvc binary */
$wgTexvc = './math/texvc';
+/**
+ * Texvc background color
+ * use LaTeX color format as used in \special function
+ * for transparent background use value 'Transparent' for alpha transparency or
+ * 'transparent' for binary transparency.
+ */
+$wgTexvcBackgroundColor = 'transparent';
+
+/**
+ * Normally when generating math images, we double-check that the
+ * directories we want to write to exist, and that files that have
+ * been generated still exist when we need to bring them up again.
+ *
+ * This lets us give useful error messages in case of permission
+ * problems, and automatically rebuild images that have been lost.
+ *
+ * On a big site with heavy NFS traffic this can be slow and flaky,
+ * so sometimes we want to short-circuit it by setting this to false.
+ */
+$wgMathCheckFiles = true;
#
# Profiling / debugging
#
+# You have to create a 'profiling' table in your database before using
+# profiling see maintenance/archives/patch-profiling.sql .
+#
+# To enable profiling, edit StartProfiler.php
-/** Enable for more detailed by-function times in debug log */
-$wgProfiling = false;
/** Only record profiling info for pages that took longer than this */
$wgProfileLimit = 0.0;
/** Don't put non-profiling info into log file */
$wgProfileOnly = false;
/** Log sums from profiling into "profiling" table in db. */
$wgProfileToDatabase = false;
-/** Only profile every n requests when profiling is turned on */
-$wgProfileSampleRate = 1;
/** If true, print a raw call tree instead of per-function report */
$wgProfileCallTree = false;
+/** Should application server host be put into profiling table */
+$wgProfilePerHost = false;
+
+/** Settings for UDP profiler */
+$wgUDPProfilerHost = '127.0.0.1';
+$wgUDPProfilerPort = '3811';
/** Detects non-matching wfProfileIn/wfProfileOut calls */
$wgDebugProfiling = false;
/** Output debug message on every wfProfileIn/wfProfileOut */
$wgDebugFunctionEntry = 0;
-/** Lots of debugging output from SquidUpdate.php */
-$wgDebugSquid = false;
+/*
+ * Destination for wfIncrStats() data...
+ * 'cache' to go into the system cache, if enabled (memcached)
+ * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost)
+ * false to disable
+ */
+$wgStatsMethod = 'cache';
+
+/** Whereas to count the number of time an article is viewed.
+ * Does not work if pages are cached (for example with squid).
+ */
$wgDisableCounters = false;
+
$wgDisableTextSearch = false;
+$wgDisableSearchContext = false;
+
+
+/**
+ * Set to true to have nicer highligted text in search results,
+ * by default off due to execution overhead
+ */
+$wgAdvancedSearchHighlighting = false;
+
+/**
+ * Regexp to match word boundaries, defaults for non-CJK languages
+ * should be empty for CJK since the words are not separate
+ */
+$wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION, "<")? '[\p{Z}\p{P}\p{C}]'
+ : '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround
+
+/**
+ * Set to true to have the search engine count total
+ * search matches to present in the Special:Search UI.
+ * Not supported by every search engine shipped with MW.
+ *
+ * This could however be slow on larger wikis, and is pretty flaky
+ * with the current title vs content split. Recommend avoiding until
+ * that's been worked out cleanly; but this may aid in testing the
+ * search UI and API to confirm that the result count works.
+ */
+$wgCountTotalSearchHits = false;
+
+/**
+ * Template for OpenSearch suggestions, defaults to API action=opensearch
+ *
+ * Sites with heavy load would tipically have these point to a custom
+ * PHP wrapper to avoid firing up mediawiki for every keystroke
+ *
+ * Placeholders: {searchTerms}
+ *
+ */
+$wgOpenSearchTemplate = false;
+
+/**
+ * Enable suggestions while typing in search boxes
+ * (results are passed around in OpenSearch format)
+ * Requires $wgEnableOpenSearchSuggest = true;
+ */
+$wgEnableMWSuggest = false;
+
+/**
+ * Enable OpenSearch suggestions requested by MediaWiki. Set this to
+ * false if you've disabled MWSuggest or another suggestion script and
+ * want reduce load caused by cached scripts pulling suggestions.
+ */
+$wgEnableOpenSearchSuggest = true;
+
+/**
+ * Expiry time for search suggestion responses
+ */
+$wgSearchSuggestCacheExpiry = 1200;
+
+/**
+ * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch
+ *
+ * Placeholders: {searchTerms}, {namespaces}, {dbname}
+ *
+ */
+$wgMWSuggestTemplate = false;
+
/**
* If you've disabled search semi-permanently, this also disables updates to the
* table. If you ever re-enable, be sure to rebuild the search table.
/**
* Show EXIF data, on by default if available.
* Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php
+ *
+ * NOTE FOR WINDOWS USERS:
+ * To enable EXIF functions, add the folloing lines to the
+ * "Windows extensions" section of php.ini:
+ *
+ * extension=extensions/php_mbstring.dll
+ * extension=extensions/php_exif.dll
*/
$wgShowEXIF = function_exists( 'exif_read_data' );
* uploads do work.
*/
$wgRemoteUploads = false;
+
+/**
+ * Disable links to talk pages of anonymous users (IPs) in listings on special
+ * pages like page history, Special:Recentchanges, etc.
+ */
$wgDisableAnonTalk = false;
/**
* Do DELETE/INSERT for link updates instead of incremental
* ALF_PRELOAD_EXISTENCE
* Preload cur_id during replaceLinkHolders
* ALF_NO_LINK_LOCK
- * Don't use locking reads when updating the link table. This is
- * necessary for wikis with a high edit rate for performance
+ * Don't use locking reads when updating the link table. This is
+ * necessary for wikis with a high edit rate for performance
* reasons, but may cause link table inconsistency
* ALF_NO_BLOCK_LOCK
* As for ALF_LINK_LOCK, this flag is a necessity for high-traffic
$wgDiff3 = '/usr/bin/diff3';
/**
- * We can also compress text in the old revisions table. If this is set on, old
+ * Path to the GNU diff utility.
+ */
+$wgDiff = '/usr/bin/diff';
+
+/**
+ * We can also compress text stored in the 'text' table. If this is set on, new
* revisions will be compressed on page save if zlib support is available. Any
* compressed revisions will be decompressed on load regardless of this setting
* *but will not be readable at all* if zlib support is not available.
/** Files with these extensions will never be allowed as uploads. */
$wgFileBlacklist = array(
# HTML may contain cookie-stealing JavaScript and web bugs
- 'html', 'htm', 'js', 'jsb',
+ 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht',
# PHP scripts may execute arbitrary code on the server
- 'php', 'phtml', 'php3', 'php4', 'phps',
+ 'php', 'phtml', 'php3', 'php4', 'php5', 'phps',
# Other types that may be interpreted by some servers
'shtml', 'jhtml', 'pl', 'py', 'cgi',
# May contain harmful executables for Windows victims
'application/x-php', 'text/x-php',
# Other types that may be interpreted by some servers
'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh',
+ # Client-side hazards on Internet Explorer
+ 'text/scriptlet', 'application/x-msdownload',
# Windows metafile, client-side vulnerability on some systems
- 'application/x-msmetafile'
+ 'application/x-msmetafile',
+ # A ZIP file may be a valid Java archive containing an applet which exploits the
+ # same-origin policy to steal cookies
+ 'application/zip',
);
/** This is a flag to determine whether or not to check file extensions on upload. */
*/
$wgStrictFileExtensions = true;
-/** Warn if uploaded files are larger than this */
-$wgUploadSizeWarning = 150 * 1024;
+/** Warn if uploaded files are larger than this (in bytes), or false to disable*/
+$wgUploadSizeWarning = false;
/** For compatibility with old installations set to false */
$wgPasswordSalt = true;
*/
$wgNamespacesWithSubpages = array(
NS_TALK => true,
- NS_USER => true,
- NS_USER_TALK => true,
- NS_PROJECT_TALK => true,
- NS_IMAGE_TALK => true,
- NS_MEDIAWIKI_TALK => true,
- NS_TEMPLATE_TALK => true,
- NS_HELP_TALK => true,
- NS_CATEGORY_TALK => true
- );
+ NS_USER => true,
+ NS_USER_TALK => true,
+ NS_PROJECT_TALK => true,
+ NS_FILE_TALK => true,
+ NS_MEDIAWIKI => true,
+ NS_MEDIAWIKI_TALK => true,
+ NS_TEMPLATE_TALK => true,
+ NS_HELP_TALK => true,
+ NS_CATEGORY_TALK => true
+);
+
+/**
+ * Which namespaces have special treatment where they should be preview-on-open
+ * Internaly only Category: pages apply, but using this extensions (e.g. Semantic MediaWiki)
+ * can specify namespaces of pages they have special treatment for
+ */
+$wgPreviewOnOpenNamespaces = array(
+ NS_CATEGORY => true
+);
$wgNamespacesToBeSearchedDefault = array(
NS_MAIN => true,
);
-/** If set, a bold ugly notice will show up at the top of every page. */
-$wgSiteNotice = '';
+/**
+ * Namespaces to be searched when user clicks the "Help" tab
+ * on Special:Search
+ *
+ * Same format as $wgNamespacesToBeSearchedDefault
+ */
+$wgNamespacesToBeSearchedHelp = array(
+ NS_PROJECT => true,
+ NS_HELP => true,
+);
+
+/**
+ * If set to true the 'searcheverything' preference will be effective only for logged-in users.
+ * Useful for big wikis to maintain different search profiles for anonymous and logged-in users.
+ *
+ */
+$wgSearchEverythingOnlyLoggedIn = false;
+/**
+ * Site notice shown at the top of each page
+ *
+ * MediaWiki:Sitenotice page, which will override this. You can also
+ * provide a separate message for logged-out users using the
+ * MediaWiki:Anonnotice page.
+ */
+$wgSiteNotice = '';
#
# Images settings
#
-/** dynamic server side image resizing ("Thumbnails") */
-$wgUseImageResize = false;
+/**
+ * Plugins for media file type handling.
+ * Each entry in the array maps a MIME type to a class name
+ */
+$wgMediaHandlers = array(
+ 'image/jpeg' => 'BitmapHandler',
+ 'image/png' => 'BitmapHandler',
+ 'image/gif' => 'GIFHandler',
+ 'image/tiff' => 'TiffHandler',
+ 'image/x-ms-bmp' => 'BmpHandler',
+ 'image/x-bmp' => 'BmpHandler',
+ 'image/svg+xml' => 'SvgHandler', // official
+ 'image/svg' => 'SvgHandler', // compat
+ 'image/vnd.djvu' => 'DjVuHandler', // official
+ 'image/x.djvu' => 'DjVuHandler', // compat
+ 'image/x-djvu' => 'DjVuHandler', // compat
+);
+
/**
* Resizing can be done using PHP's internal image libraries or using
- * ImageMagick. The later supports more file formats than PHP, which only
- * supports PNG, GIF, JPG, XBM and WBMP.
+ * ImageMagick or another third-party converter, e.g. GraphicMagick.
+ * These support more file formats than PHP, which only supports PNG,
+ * GIF, JPG, XBM and WBMP.
*
* Use Image Magick instead of PHP builtin functions.
*/
/** The convert command shipped with ImageMagick */
$wgImageMagickConvertCommand = '/usr/bin/convert';
-# Scalable Vector Graphics (SVG) may be uploaded as images.
-# Since SVG support is not yet standard in browsers, it is
-# necessary to rasterize SVGs to PNG as a fallback format.
-#
-# An external program is required to perform this conversion:
-$wgSVGConverters = array(
- 'ImageMagick' => '$path/convert -background white -geometry $width $input $output',
- 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
- 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
+/** Sharpening parameter to ImageMagick */
+$wgSharpenParameter = '0x0.4';
+
+/** Reduction in linear dimensions below which sharpening will be enabled */
+$wgSharpenReductionThreshold = 0.85;
+
+/**
+ * Temporary directory used for ImageMagick. The directory must exist. Leave
+ * this set to false to let ImageMagick decide for itself.
+ */
+$wgImageMagickTempDir = false;
+
+/**
+ * Use another resizing converter, e.g. GraphicMagick
+ * %s will be replaced with the source path, %d with the destination
+ * %w and %h will be replaced with the width and height
+ *
+ * An example is provided for GraphicMagick
+ * Leave as false to skip this
+ */
+#$wgCustomConvertCommand = "gm convert %s -resize %wx%h %d"
+$wgCustomConvertCommand = false;
+
+# Scalable Vector Graphics (SVG) may be uploaded as images.
+# Since SVG support is not yet standard in browsers, it is
+# necessary to rasterize SVGs to PNG as a fallback format.
+#
+# An external program is required to perform this conversion:
+$wgSVGConverters = array(
+ 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output',
+ 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output',
+ 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output',
'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input',
'rsvg' => '$path/rsvg -w$width -h$height $input $output',
+ 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output',
);
/** Pick one of the above */
$wgSVGConverter = 'ImageMagick';
/** If not in the executable PATH, specify */
$wgSVGConverterPath = '';
-/** Don't scale a SVG larger than this unless its native size is larger */
-$wgSVGMaxSize = 1024;
+/** Don't scale a SVG larger than this */
+$wgSVGMaxSize = 2048;
+/**
+ * Don't thumbnail an image if it will use too much working memory
+ * Default is 50 MB if decompressed to RGBA form, which corresponds to
+ * 12.5 million pixels or 3500x3500
+ */
+$wgMaxImageArea = 1.25e7;
+/**
+ * Force thumbnailing of animated GIFs above this size to a single
+ * frame instead of an animated thumbnail. ImageMagick seems to
+ * get real unhappy and doesn't play well with resource limits. :P
+ * Defaulting to 1 megapixel (1000x1000)
+ */
+$wgMaxAnimatedGifArea = 1.0e6;
+/**
+ * Browsers don't support TIFF inline generally...
+ * For inline display, we need to convert to PNG or JPEG.
+ * Note scaling should work with ImageMagick, but may not with GD scaling.
+ * // PNG is lossless, but inefficient for photos
+ * $wgTiffThumbnailType = array( 'png', 'image/png' );
+ * // JPEG is good for photos, but has no transparency support. Bad for diagrams.
+ * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' );
+ */
+ $wgTiffThumbnailType = false;
+
+/**
+ * If rendered thumbnail files are older than this timestamp, they
+ * will be rerendered on demand as if the file didn't already exist.
+ * Update if there is some need to force thumbs and SVG rasterizations
+ * to rerender, such as fixes to rendering bugs.
+ */
+$wgThumbnailEpoch = '20030516000000';
+
+/**
+ * If set, inline scaled images will still produce <img> tags ready for
+ * output instead of showing an error message.
+ *
+ * This may be useful if errors are transitory, especially if the site
+ * is configured to automatically render thumbnails on request.
+ *
+ * On the other hand, it may obscure error conditions from debugging.
+ * Enable the debug log or the 'thumbnail' log group to make sure errors
+ * are logged to a file for review.
+ */
+$wgIgnoreImageErrors = false;
+
+/**
+ * Allow thumbnail rendering on page view. If this is false, a valid
+ * thumbnail URL is still output, but no file will be created at
+ * the target location. This may save some time if you have a
+ * thumb.php or 404 handler set up which is faster than the regular
+ * webserver(s).
+ */
+$wgGenerateThumbnailOnParse = true;
+
+/**
+* Show thumbnails for old images on the image description page
+*/
+$wgShowArchiveThumbnails = true;
+
+/** Obsolete, always true, kept for compatibility with extensions */
+$wgUseImageResize = true;
+
/** Set $wgCommandLineMode if it's not set already, to avoid notices */
if( !isset( $wgCommandLineMode ) ) {
$wgCommandLineMode = false;
}
+/** For colorized maintenance script output, is your terminal background dark ? */
+$wgCommandLineDarkBg = false;
+
+/**
+ * Array for extensions to register their maintenance scripts with the
+ * system. The key is the name of the class and the value is the full
+ * path to the file
+ */
+$wgMaintenanceScripts = array();
#
# Recent changes settings
#
-/** Log IP addresses in the recentchanges table */
-$wgPutIPinRC = false;
+/** Log IP addresses in the recentchanges table; can be accessed only by extensions (e.g. CheckUser) or a DB admin */
+$wgPutIPinRC = true;
/**
* Recentchanges items are periodically purged; entries older than this many
* seconds will go.
- * For one week : 7 * 24 * 3600
+ * Default: 13 weeks = about three months
+ */
+$wgRCMaxAge = 13 * 7 * 24 * 3600;
+
+/**
+ * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers higher than what will be stored.
+ * Note that this is disabled by default because we sometimes do have RC data which is beyond the limit
+ * for some reason, and some users may use the high numbers to display that data which is still there.
*/
-$wgRCMaxAge = 7 * 24 * 3600;
+$wgRCFilterByAge = false;
+/**
+ * List of Days and Limits options to list in the Special:Recentchanges and Special:Recentchangeslinked pages.
+ */
+$wgRCLinkLimits = array( 50, 100, 250, 500 );
+$wgRCLinkDays = array( 1, 3, 7, 14, 30 );
-# Send RC updates via UDP
+/**
+ * Send recent changes updates via UDP. The updates will be formatted for IRC.
+ * Set this to the IP address of the receiver.
+ */
$wgRC2UDPAddress = false;
+
+/**
+ * Port number for RC updates
+ */
$wgRC2UDPPort = false;
+
+/**
+ * Prefix to prepend to each UDP packet.
+ * This can be used to identify the wiki. A script is available called
+ * mxircecho.py which listens on a UDP port, and uses a prefix ending in a
+ * tab to identify the IRC channel to send the log line to.
+ */
$wgRC2UDPPrefix = '';
+/**
+ * If this is set to true, $wgLocalInterwiki will be prepended to links in the
+ * IRC feed. If this is set to a string, that string will be used as the prefix.
+ */
+$wgRC2UDPInterwikiPrefix = false;
+
+/**
+ * Set to true to omit "bot" edits (by users with the bot permission) from the
+ * UDP feed.
+ */
+$wgRC2UDPOmitBots = false;
+
+/**
+ * Enable user search in Special:Newpages
+ * This is really a temporary hack around an index install bug on some Wikipedias.
+ * Kill it once fixed.
+ */
+$wgEnableNewpagesUserFilter = true;
+
#
# Copyright and credits settings
#
/** Override for copyright metadata.
* TODO: these options need documentation
*/
-$wgRightsPage = NULL;
-$wgRightsUrl = NULL;
-$wgRightsText = NULL;
-$wgRightsIcon = NULL;
+$wgRightsPage = null;
+$wgRightsUrl = null;
+$wgRightsText = null;
+$wgRightsIcon = null;
/** Set this to some HTML to override the rights icon with an arbitrary logo */
-$wgCopyrightIcon = NULL;
+$wgCopyrightIcon = null;
/** Set this to true if you want detailed copyright information forms on Upload. */
$wgUseCopyrightUpload = false;
*/
$wgCapitalLinks = true;
+/**
+ * @since 1.16 - This can now be set per-namespace. Some special namespaces (such
+ * as Special, see MWNamespace::$alwaysCapitalizedNamespaces for the full list) must be
+ * true by default (and setting them has no effect), due to various things that
+ * require them to be so. Also, since Talk namespaces need to directly mirror their
+ * associated content namespaces, the values for those are ignored in favor of the
+ * subject namespace's setting. Setting for NS_MEDIA is taken automatically from
+ * NS_FILE.
+ * EX: $wgCapitalLinkOverrides[ NS_FILE ] = false;
+ */
+$wgCapitalLinkOverrides = array();
+
/**
* List of interwiki prefixes for wikis we'll accept as sources for
* Special:Import (for sysops). Since complete page history can be imported,
*/
$wgImportSources = array();
+/**
+ * Optional default target namespace for interwiki imports.
+ * Can use this to create an incoming "transwiki"-style queue.
+ * Set to numeric key, not the name.
+ *
+ * Users may override this in the Special:Import dialog.
+ */
+$wgImportTargetNamespace = null;
+
+/**
+ * If set to false, disables the full-history option on Special:Export.
+ * This is currently poorly optimized for long edit histories, so is
+ * disabled on Wikimedia's sites.
+ */
+$wgExportAllowHistory = true;
+
+/**
+ * If set nonzero, Special:Export requests for history of pages with
+ * more revisions than this will be rejected. On some big sites things
+ * could get bogged down by very very long pages.
+ */
+$wgExportMaxHistory = 0;
+
+/**
+* Return distinct author list (when not returning full history)
+*/
+$wgExportAllowListContributors = false ;
+
+/**
+ * If non-zero, Special:Export accepts a "pagelink-depth" parameter
+ * up to this specified level, which will cause it to include all
+ * pages linked to from the pages you specify. Since this number
+ * can become *insanely large* and could easily break your wiki,
+ * it's disabled by default for now.
+ *
+ * There's a HARD CODED limit of 5 levels of recursion to prevent a
+ * crazy-big export from being done by someone setting the depth
+ * number too high. In other words, last resort safety net.
+ */
+$wgExportMaxLinkDepth = 0;
+/**
+* Whether to allow the "export all pages in namespace" option
+*/
+$wgExportFromNamespaces = false;
-/** Text matching this regular expression will be recognised as spam
- * See http://en.wikipedia.org/wiki/Regular_expression */
-$wgSpamRegex = false;
-/** Similarly if this function returns true */
+/**
+ * Edits matching these regular expressions in body text
+ * will be recognised as spam and rejected automatically.
+ *
+ * There's no administrator override on-wiki, so be careful what you set. :)
+ * May be an array of regexes or a single string for backwards compatibility.
+ *
+ * See http://en.wikipedia.org/wiki/Regular_expression
+ * Note that each regex needs a beginning/end delimiter, eg: # or /
+ */
+$wgSpamRegex = array();
+
+/** Same as the above except for edit summaries */
+$wgSummarySpamRegex = array();
+
+/** Similarly you can get a function to do the job. The function will be given
+ * the following args:
+ * - a Title object for the article the edit is made on
+ * - the text submitted in the textarea (wpTextbox1)
+ * - the section number.
+ * The return should be boolean indicating whether the edit matched some evilness:
+ * - true : block it
+ * - false : let it through
+ *
+ * For a complete example, have a look at the SpamBlacklist extension.
+ */
$wgFilterCallback = false;
/** Go button goes straight to the edit screen if the article doesn't exist. */
$wgGoToEdit = false;
-/** Allow limited user-specified HTML in wiki pages?
- * It will be run through a whitelist for security. Set this to false if you
- * want wiki pages to consist only of wiki markup. Note that replacements do not
- * yet exist for all HTML constructs.*/
-$wgUserHtml = true;
-
/** Allow raw, unchecked HTML in <html>...</html> sections.
* THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions
* TO RESTRICT EDITING to only those that you trust
/**
* $wgUseTidy: use tidy to make sure HTML output is sane.
- * This should only be enabled if $wgUserHtml is true.
- * tidy is a free tool that fixes broken HTML.
+ * Tidy is a free tool that fixes broken HTML.
* See http://www.w3.org/People/Raggett/tidy/
* $wgTidyBin should be set to the path of the binary and
* $wgTidyConf to the path of the configuration file.
* 'extension=tidy.so' to php.ini.
*/
$wgUseTidy = false;
+$wgAlwaysUseTidy = false;
$wgTidyBin = 'tidy';
-$wgTidyConf = $IP.'/extensions/tidy/tidy.conf';
+$wgTidyConf = $IP.'/includes/tidy.conf';
$wgTidyOpts = '';
-$wgTidyInternal = function_exists( 'tidy_load_config' );
+$wgTidyInternal = extension_loaded( 'tidy' );
+
+/**
+ * Put tidy warnings in HTML comments
+ * Only works for internal tidy.
+ */
+$wgDebugTidy = false;
+
+/**
+ * Validate the overall output using tidy and refuse
+ * to display the page if it's not valid.
+ */
+$wgValidateAllHtml = false;
/** See list of skins and their symbolic names in languages/Language.php */
$wgDefaultSkin = 'monobook';
/**
- * Settings added to this array will override the language globals for the user
- * preferences used by anonymous visitors and newly created accounts. (See names
- * and sample values in languages/Language.php)
+* Should we allow the user's to select their own skin that will override the default?
+* @deprecated in 1.16, use $wgHiddenPrefs[] = 'skin' to disable it
+*/
+$wgAllowUserSkin = true;
+
+/**
+ * Optionally, we can specify a stylesheet to use for media="handheld".
+ * This is recognized by some, but not all, handheld/mobile/PDA browsers.
+ * If left empty, compliant handheld browsers won't pick up the skin
+ * stylesheet, which is specified for 'screen' media.
+ *
+ * Can be a complete URL, base-relative path, or $wgStylePath-relative path.
+ * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML.
+ *
+ * Will also be switched in when 'handheld=yes' is added to the URL, like
+ * the 'printable=yes' mode for print media.
+ */
+$wgHandheldStyle = false;
+
+/**
+ * If set, 'screen' and 'handheld' media specifiers for stylesheets are
+ * transformed such that they apply to the iPhone/iPod Touch Mobile Safari,
+ * which doesn't recognize 'handheld' but does support media queries on its
+ * screen size.
+ *
+ * Consider only using this if you have a *really good* handheld stylesheet,
+ * as iPhone users won't have any way to disable it and use the "grown-up"
+ * styles instead.
+ */
+$wgHandheldForIPhone = false;
+
+/**
+ * Settings added to this array will override the default globals for the user
+ * preferences used by anonymous visitors and newly created accounts.
* For instance, to disable section editing links:
- * $wgDefaultUserOptions ['editsection'] = 0;
+ * $wgDefaultUserOptions ['editsection'] = 0;
*
*/
-$wgDefaultUserOptions = array();
+$wgDefaultUserOptions = array(
+ 'quickbar' => 1,
+ 'underline' => 2,
+ 'cols' => 80,
+ 'rows' => 25,
+ 'searchlimit' => 20,
+ 'contextlines' => 5,
+ 'contextchars' => 50,
+ 'disablesuggest' => 0,
+ 'skin' => false,
+ 'math' => 1,
+ 'usenewrc' => 0,
+ 'rcdays' => 7,
+ 'rclimit' => 50,
+ 'wllimit' => 250,
+ 'hideminor' => 0,
+ 'hidepatrolled' => 0,
+ 'newpageshidepatrolled' => 0,
+ 'highlightbroken' => 1,
+ 'stubthreshold' => 0,
+ 'previewontop' => 1,
+ 'previewonfirst' => 0,
+ 'editsection' => 1,
+ 'editsectiononrightclick' => 0,
+ 'editondblclick' => 0,
+ 'editwidth' => 0,
+ 'showtoc' => 1,
+ 'showtoolbar' => 1,
+ 'minordefault' => 0,
+ 'date' => 'default',
+ 'imagesize' => 2,
+ 'thumbsize' => 2,
+ 'rememberpassword' => 0,
+ 'nocache' => 0,
+ 'diffonly' => 0,
+ 'showhiddencats' => 0,
+ 'norollbackdiff' => 0,
+ 'enotifwatchlistpages' => 0,
+ 'enotifusertalkpages' => 1,
+ 'enotifminoredits' => 0,
+ 'enotifrevealaddr' => 0,
+ 'shownumberswatching' => 1,
+ 'fancysig' => 0,
+ 'externaleditor' => 0,
+ 'externaldiff' => 0,
+ 'forceeditsummary' => 0,
+ 'showjumplinks' => 1,
+ 'justify' => 0,
+ 'numberheadings' => 0,
+ 'uselivepreview' => 0,
+ 'watchlistdays' => 3.0,
+ 'extendwatchlist' => 0,
+ 'watchlisthideminor' => 0,
+ 'watchlisthidebots' => 0,
+ 'watchlisthideown' => 0,
+ 'watchlisthideanons' => 0,
+ 'watchlisthideliu' => 0,
+ 'watchlisthidepatrolled' => 0,
+ 'watchcreations' => 0,
+ 'watchdefault' => 0,
+ 'watchmoves' => 0,
+ 'watchdeletion' => 0,
+ 'noconvertlink' => 0,
+ 'gender' => 'unknown',
+ 'ccmeonemails' => 0,
+ 'disablemail' => 0,
+ 'editfont' => 'default',
+);
-/** Whether or not to allow and use real name fields. Defaults to true. */
+/**
+ * Whether or not to allow and use real name fields.
+ * @deprecated in 1.16, use $wgHiddenPrefs[] = 'realname' below to disable real
+ * names
+ */
$wgAllowRealName = true;
-/** Use XML parser? */
-$wgUseXMLparser = false ;
+/** An array of preferences to not show for the user */
+$wgHiddenPrefs = array();
-/** Extensions */
-$wgSkinExtensionFunctions = array();
+/*****************************************************************************
+ * Extensions
+ */
+
+/**
+ * A list of callback functions which are called once MediaWiki is fully initialised
+ */
$wgExtensionFunctions = array();
+
+/**
+ * Extension functions for initialisation of skins. This is called somewhat earlier
+ * than $wgExtensionFunctions.
+ */
+$wgSkinExtensionFunctions = array();
+
+/**
+ * Extension messages files.
+ *
+ * Associative array mapping extension name to the filename where messages can be
+ * found. The file should contain variable assignments. Any of the variables
+ * present in languages/messages/MessagesEn.php may be defined, but $messages
+ * is the most common.
+ *
+ * Variables defined in extensions will override conflicting variables defined
+ * in the core.
+ *
+ * Example:
+ * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php';
+ *
+ */
+$wgExtensionMessagesFiles = array();
+
+/**
+ * Aliases for special pages provided by extensions.
+ * @deprecated Use $specialPageAliases in a file referred to by $wgExtensionMessagesFiles
+ */
+$wgExtensionAliasesFiles = array();
+
+/**
+ * Parser output hooks.
+ * This is an associative array where the key is an extension-defined tag
+ * (typically the extension name), and the value is a PHP callback.
+ * These will be called as an OutputPageParserOutput hook, if the relevant
+ * tag has been registered with the parser output object.
+ *
+ * Registration is done with $pout->addOutputHook( $tag, $data ).
+ *
+ * The callback has the form:
+ * function outputHook( $outputPage, $parserOutput, $data ) { ... }
+ */
+$wgParserOutputHooks = array();
+
+/**
+ * List of valid skin names.
+ * The key should be the name in all lower case, the value should be a display name.
+ * The default skins will be added later, by Skin::getSkinNames(). Use
+ * Skin::getSkinNames() as an accessor if you wish to have access to the full list.
+ */
+$wgValidSkinNames = array();
+
+/**
+ * Special page list.
+ * See the top of SpecialPage.php for documentation.
+ */
+$wgSpecialPages = array();
+
+/**
+ * Array mapping class names to filenames, for autoloading.
+ */
+$wgAutoloadClasses = array();
+
/**
- * An array of extension types and inside that their names, versions, authors
- * and urls, note that the version and url key can be omitted.
+ * An array of extension types and inside that their names, versions, authors,
+ * urls, descriptions and pointers to localized description msgs. Note that
+ * the version, url, description and descriptionmsg key can be omitted.
*
* <code>
* $wgExtensionCredits[$type][] = array(
* 'name' => 'Example extension',
- * 'version' => 1.9,
+ * 'version' => 1.9,
+ * 'path' => __FILE__,
* 'author' => 'Foo Barstein',
* 'url' => 'http://wwww.example.com/Example%20Extension/',
+ * 'description' => 'An example extension',
+ * 'descriptionmsg' => 'exampleextension-desc',
* );
* </code>
*
- * Where $type is 'specialpage', 'parserhook', or 'other'.
+ * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'.
+ * Where 'descriptionmsg' can be an array with message key and parameters:
+ * 'descriptionmsg' => array( 'exampleextension-desc', param1, param2, ... ),
*/
$wgExtensionCredits = array();
+/*
+ * end extensions
+ ******************************************************************************/
/**
* Allow user Javascript page?
/** Use the site's Cascading Style Sheets (CSS)? */
$wgUseSiteCss = true;
-/** Filter for Special:Randompage. Part of a WHERE clause */
+/**
+ * Filter for Special:Randompage. Part of a WHERE clause
+ * @deprecated as of 1.16, use the SpecialRandomGetRandomTitle hook
+*/
+
$wgExtraRandompageSQL = false;
/** Allow the "info" action, very inefficient at the moment */
/** Maximum indent level of toc. */
$wgMaxTocLevel = 999;
-/** Use external C++ diff engine (module wikidiff from the extensions package) */
-$wgUseExternalDiffEngine = false;
+/** Name of the external diff engine to use */
+$wgExternalDiffEngine = false;
/** Use RC Patrolling to check for vandalism */
$wgUseRCPatrol = true;
+/** Use new page patrolling to check new pages on Special:Newpages */
+$wgUseNPPatrol = true;
+
+/** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */
+$wgFeed = true;
+
/** Set maximum number of results to return in syndication feeds (RSS, Atom) for
* eg Recentchanges, Newpages. */
$wgFeedLimit = 50;
/** _Minimum_ timeout for cached Recentchanges feed, in seconds.
* A cached version will continue to be served out even if changes
- * are made, until this many seconds runs out since the last render. */
+ * are made, until this many seconds runs out since the last render.
+ *
+ * If set to 0, feed caching is disabled. Use this for debugging only;
+ * feed generation can be pretty slow with diffs.
+ */
$wgFeedCacheTimeout = 60;
/** When generating Recentchanges RSS/Atom feed, diffs will not be generated for
* pages larger than this size. */
$wgFeedDiffCutoff = 32768;
+/** Override the site's default RSS/ATOM feed for recentchanges that appears on
+ * every page. Some sites might have a different feed they'd like to promote
+ * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one).
+ * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one
+ * of either 'rss' or 'atom'.
+ */
+$wgOverrideSiteFeed = array();
+
+/**
+ * Which feed types should we provide by default? This can include 'rss',
+ * 'atom', neither, or both.
+ */
+$wgAdvertisedFeedTypes = array( 'atom' );
/**
* Additional namespaces. If the namespaces defined in Language.php and
# 102 => "Aide",
# 103 => "Discussion_Aide"
# );
-$wgExtraNamespaces = NULL;
+$wgExtraNamespaces = null;
+
+/**
+ * Namespace aliases
+ * These are alternate names for the primary localised namespace names, which
+ * are defined by $wgExtraNamespaces and the language file. If a page is
+ * requested with such a prefix, the request will be redirected to the primary
+ * name.
+ *
+ * Set this to a map from namespace names to IDs.
+ * Example:
+ * $wgNamespaceAliases = array(
+ * 'Wikipedian' => NS_USER,
+ * 'Help' => 100,
+ * );
+ */
+$wgNamespaceAliases = array();
/**
* Limit images on image description pages to a user-selectable limit. In order
- * to reduce disk usage, limits can only be selected from a list. This is the
- * list of settings the user can choose from:
+ * to reduce disk usage, limits can only be selected from a list.
+ * The user preference is saved as an array offset in the database, by default
+ * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you
+ * change it if you alter the array (see bug 8858).
+ * This is the list of settings the user can choose from:
*/
$wgImageLimits = array (
array(320,240),
300
);
+/**
+ * Adjust width of upright images when parameter 'upright' is used
+ * This allows a nicer look for upright images without the need to fix the width
+ * by hardcoded px in wiki sourcecode.
+ */
+$wgThumbUpright = 0.75;
+
/**
* On category pages, show thumbnail gallery for images belonging to that
* category instead of listing them as articles.
$wgCategoryMagicGallery = true;
/**
- * Paging limit for items in categories
+ * Paging limit for categories
*/
$wgCategoryPagingLimit = 200;
+/**
+ * Should the default category sortkey be the prefixed title?
+ * Run maintenance/refreshLinks.php after changing this.
+ */
+$wgCategoryPrefixedDefaultSortkey = true;
+
/**
* Browser Blacklist for unicode non compliant browsers
* Contains a list of regexps : "/regexp/" matching problematic browsers
*/
$wgBrowserBlackList = array(
- "/Mozilla\/4\.78 \[en\] \(X11; U; Linux/",
+ /**
+ * Netscape 2-4 detection
+ * The minor version may contain strings such as "Gold" or "SGoldC-SGI"
+ * Lots of non-netscape user agents have "compatible", so it's useful to check for that
+ * with a negative assertion. The [UIN] identifier specifies the level of security
+ * in a Netscape/Mozilla browser, checking for it rules out a number of fakers.
+ * The language string is unreliable, it is missing on NS4 Mac.
+ *
+ * Reference: http://www.psychedelix.com/agents/index.shtml
+ */
+ '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
+ '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
+ '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/',
+
/**
* MSIE on Mac OS 9 is teh sux0r, converts þ to <thorn>, ð to <eth>, Þ to <THORN> and Ð to <ETH>
*
* @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864
* @link http://en.wikipedia.org/wiki/Template%3AOS9
*/
- "/Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/"
+ '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/',
+
+ /**
+ * Google wireless transcoder, seems to eat a lot of chars alive
+ * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361
+ */
+ '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/'
);
/**
* Fake out the timezone that the server thinks it's in. This will be used for
* date display and not for what's stored in the DB. Leave to null to retain
- * your server's OS-based timezone value. This is the same as the timezone.
+ * your server's OS-based timezone value.
*
- * This variable is currently used ONLY for signature formatting, not for
- * anything else.
+ * This variable is currently used only for signature formatting and for local
+ * time/date parser variables ({{LOCALTIME}} etc.)
+ *
+ * Timezones can be translated by editing MediaWiki messages of type
+ * timezone-nameinlowercase like timezone-utc.
*/
# $wgLocaltimezone = 'GMT';
# $wgLocaltimezone = 'PST8PDT';
$wgLocaltimezone = null;
/**
- * Set an offset from UTC in hours to use for the default timezone setting
+ * Set an offset from UTC in minutes to use for the default timezone setting
* for anonymous users and new user accounts.
*
* This setting is used for most date/time displays in the software, and is
* overrideable in user preferences. It is *not* used for signature timestamps.
*
* You can set it to match the configured server timezone like this:
- * $wgLocalTZoffset = date("Z") / 3600;
+ * $wgLocalTZoffset = date("Z") / 60;
*
* If your server is not configured for the timezone you want, you can set
- * this in conjunction with the signature timezone and override the TZ
- * environment variable like so:
+ * this in conjunction with the signature timezone and override the PHP default
+ * timezone like so:
* $wgLocaltimezone="Europe/Berlin";
- * putenv("TZ=$wgLocaltimezone");
- * $wgLocalTZoffset = date("Z") / 3600;
+ * date_default_timezone_set( $wgLocaltimezone );
+ * $wgLocalTZoffset = date("Z") / 60;
*
* Leave at NULL to show times in universal time (UTC/GMT).
*/
/**
- * When translating messages with wfMsg(), it is not always clear what should be
- * considered UI messages and what shoud be content messages.
+ * When translating messages with wfMsg(), it is not always clear what should
+ * be considered UI messages and what should be content messages.
*
- * For example, for regular wikipedia site like en, there should be only one
- * 'mainpage', therefore when getting the link of 'mainpage', we should treate
- * it as content of the site and call wfMsgForContent(), while for rendering the
- * text of the link, we call wfMsg(). The code in default behaves this way.
- * However, sites like common do offer different versions of 'mainpage' and the
- * like for different languages. This array provides a way to override the
- * default behavior. For example, to allow language specific mainpage and
- * community portal, set
+ * For example, for the English Wikipedia, there should be only one 'mainpage',
+ * so when getting the link for 'mainpage', we should treat it as site content
+ * and call wfMsgForContent(), but for rendering the text of the link, we call
+ * wfMsg(). The code behaves this way by default. However, sites like the
+ * Wikimedia Commons do offer different versions of 'mainpage' and the like for
+ * different languages. This array provides a way to override the default
+ * behavior. For example, to allow language-specific main page and community
+ * portal, set
*
* $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' );
*/
$wgHooks = array();
/**
- * Experimental preview feature to fetch rendered text
- * over an XMLHttpRequest from JavaScript instead of
- * forcing a submit and reload of the whole page.
- * Leave disabled unless you're testing it.
+ * The logging system has two levels: an event type, which describes the
+ * general category and can be viewed as a named subset of all logs; and
+ * an action, which is a specific kind of event that can exist in that
+ * log type.
+ */
+$wgLogTypes = array( '',
+ 'block',
+ 'protect',
+ 'rights',
+ 'delete',
+ 'upload',
+ 'move',
+ 'import',
+ 'patrol',
+ 'merge',
+ 'suppress',
+);
+
+/**
+ * This restricts log access to those who have a certain right
+ * Users without this will not see it in the option menu and can not view it
+ * Restricted logs are not added to recent changes
+ * Logs should remain non-transcludable
+ * Format: logtype => permissiontype
+ */
+$wgLogRestrictions = array(
+ 'suppress' => 'suppressionlog'
+);
+
+/**
+ * Show/hide links on Special:Log will be shown for these log types.
+ *
+ * This is associative array of log type => boolean "hide by default"
+ *
+ * See $wgLogTypes for a list of available log types.
+ *
+ * For example:
+ * $wgFilterLogTypes => array(
+ * 'move' => true,
+ * 'import' => false,
+ * );
+ *
+ * Will display show/hide links for the move and import logs. Move logs will be
+ * hidden by default unless the link is clicked. Import logs will be shown by
+ * default, and hidden when the link is clicked.
+ *
+ * A message of the form log-show-hide-<type> should be added, and will be used
+ * for the link text.
+ */
+$wgFilterLogTypes = array(
+ 'patrol' => true
+);
+
+/**
+ * Lists the message key string for each log type. The localized messages
+ * will be listed in the user interface.
+ *
+ * Extensions with custom log types may add to this array.
+ */
+$wgLogNames = array(
+ '' => 'all-logs-page',
+ 'block' => 'blocklogpage',
+ 'protect' => 'protectlogpage',
+ 'rights' => 'rightslog',
+ 'delete' => 'dellogpage',
+ 'upload' => 'uploadlogpage',
+ 'move' => 'movelogpage',
+ 'import' => 'importlogpage',
+ 'patrol' => 'patrol-log-page',
+ 'merge' => 'mergelog',
+ 'suppress' => 'suppressionlog',
+);
+
+/**
+ * Lists the message key string for descriptive text to be shown at the
+ * top of each log type.
+ *
+ * Extensions with custom log types may add to this array.
+ */
+$wgLogHeaders = array(
+ '' => 'alllogstext',
+ 'block' => 'blocklogtext',
+ 'protect' => 'protectlogtext',
+ 'rights' => 'rightslogtext',
+ 'delete' => 'dellogpagetext',
+ 'upload' => 'uploadlogpagetext',
+ 'move' => 'movelogpagetext',
+ 'import' => 'importlogpagetext',
+ 'patrol' => 'patrol-log-header',
+ 'merge' => 'mergelogpagetext',
+ 'suppress' => 'suppressionlogtext',
+);
+
+/**
+ * Lists the message key string for formatting individual events of each
+ * type and action when listed in the logs.
+ *
+ * Extensions with custom log types may add to this array.
+ */
+$wgLogActions = array(
+ 'block/block' => 'blocklogentry',
+ 'block/unblock' => 'unblocklogentry',
+ 'block/reblock' => 'reblock-logentry',
+ 'protect/protect' => 'protectedarticle',
+ 'protect/modify' => 'modifiedarticleprotection',
+ 'protect/unprotect' => 'unprotectedarticle',
+ 'protect/move_prot' => 'movedarticleprotection',
+ 'rights/rights' => 'rightslogentry',
+ 'delete/delete' => 'deletedarticle',
+ 'delete/restore' => 'undeletedarticle',
+ 'delete/revision' => 'revdelete-logentry',
+ 'delete/event' => 'logdelete-logentry',
+ 'upload/upload' => 'uploadedimage',
+ 'upload/overwrite' => 'overwroteimage',
+ 'upload/revert' => 'uploadedimage',
+ 'move/move' => '1movedto2',
+ 'move/move_redir' => '1movedto2_redir',
+ 'import/upload' => 'import-logentry-upload',
+ 'import/interwiki' => 'import-logentry-interwiki',
+ 'merge/merge' => 'pagemerge-logentry',
+ 'suppress/revision' => 'revdelete-logentry',
+ 'suppress/file' => 'revdelete-logentry',
+ 'suppress/event' => 'logdelete-logentry',
+ 'suppress/delete' => 'suppressedarticle',
+ 'suppress/block' => 'blocklogentry',
+ 'suppress/reblock' => 'reblock-logentry',
+);
+
+/**
+ * The same as above, but here values are names of functions,
+ * not messages
+ */
+$wgLogActionsHandlers = array();
+
+/**
+ * Maintain a log of newusers at Log/newusers?
+ */
+$wgNewUserLog = true;
+
+/**
+ * List of special pages, followed by what subtitle they should go under
+ * at Special:SpecialPages
*/
-$wgLivePreview = false;
+$wgSpecialPageGroups = array(
+ 'DoubleRedirects' => 'maintenance',
+ 'BrokenRedirects' => 'maintenance',
+ 'Lonelypages' => 'maintenance',
+ 'Uncategorizedpages' => 'maintenance',
+ 'Uncategorizedcategories' => 'maintenance',
+ 'Uncategorizedimages' => 'maintenance',
+ 'Uncategorizedtemplates' => 'maintenance',
+ 'Unusedcategories' => 'maintenance',
+ 'Unusedimages' => 'maintenance',
+ 'Protectedpages' => 'maintenance',
+ 'Protectedtitles' => 'maintenance',
+ 'Unusedtemplates' => 'maintenance',
+ 'Withoutinterwiki' => 'maintenance',
+ 'Longpages' => 'maintenance',
+ 'Shortpages' => 'maintenance',
+ 'Ancientpages' => 'maintenance',
+ 'Deadendpages' => 'maintenance',
+ 'Wantedpages' => 'maintenance',
+ 'Wantedcategories' => 'maintenance',
+ 'Wantedfiles' => 'maintenance',
+ 'Wantedtemplates' => 'maintenance',
+ 'Unwatchedpages' => 'maintenance',
+ 'Fewestrevisions' => 'maintenance',
+
+ 'Userlogin' => 'login',
+ 'Userlogout' => 'login',
+ 'CreateAccount' => 'login',
+
+ 'Recentchanges' => 'changes',
+ 'Recentchangeslinked' => 'changes',
+ 'Watchlist' => 'changes',
+ 'Newimages' => 'changes',
+ 'Newpages' => 'changes',
+ 'Log' => 'changes',
+ 'Tags' => 'changes',
+
+ 'Upload' => 'media',
+ 'Listfiles' => 'media',
+ 'MIMEsearch' => 'media',
+ 'FileDuplicateSearch' => 'media',
+ 'Filepath' => 'media',
+
+ 'Listusers' => 'users',
+ 'Activeusers' => 'users',
+ 'Listgrouprights' => 'users',
+ 'Ipblocklist' => 'users',
+ 'Contributions' => 'users',
+ 'Emailuser' => 'users',
+ 'Listadmins' => 'users',
+ 'Listbots' => 'users',
+ 'Userrights' => 'users',
+ 'Blockip' => 'users',
+ 'Preferences' => 'users',
+ 'Resetpass' => 'users',
+ 'DeletedContributions' => 'users',
+
+ 'Mostlinked' => 'highuse',
+ 'Mostlinkedcategories' => 'highuse',
+ 'Mostlinkedtemplates' => 'highuse',
+ 'Mostcategories' => 'highuse',
+ 'Mostimages' => 'highuse',
+ 'Mostrevisions' => 'highuse',
+
+ 'Allpages' => 'pages',
+ 'Prefixindex' => 'pages',
+ 'Listredirects' => 'pages',
+ 'Categories' => 'pages',
+ 'Disambiguations' => 'pages',
+
+ 'Randompage' => 'redirects',
+ 'Randomredirect' => 'redirects',
+ 'Mypage' => 'redirects',
+ 'Mytalk' => 'redirects',
+ 'Mycontributions' => 'redirects',
+ 'Search' => 'redirects',
+ 'LinkSearch' => 'redirects',
+
+ 'Movepage' => 'pagetools',
+ 'MergeHistory' => 'pagetools',
+ 'Revisiondelete' => 'pagetools',
+ 'Undelete' => 'pagetools',
+ 'Export' => 'pagetools',
+ 'Import' => 'pagetools',
+ 'Whatlinkshere' => 'pagetools',
+
+ 'Statistics' => 'wiki',
+ 'Version' => 'wiki',
+ 'Lockdb' => 'wiki',
+ 'Unlockdb' => 'wiki',
+ 'Allmessages' => 'wiki',
+ 'Popularpages' => 'wiki',
+
+ 'Specialpages' => 'other',
+ 'Blockme' => 'other',
+ 'Booksources' => 'other',
+);
/**
* Disable the internal MySQL-based search, to allow it to be
*/
$wgSearchForwardUrl = null;
+/**
+ * Set a default target for external links, e.g. _blank to pop up a new window
+ */
+$wgExternalLinkTarget = false;
+
/**
* If true, external URL links in wiki text will be given the
* rel="nofollow" attribute as a hint to search engines that
$wgNoFollowLinks = true;
/**
- * Specifies the minimal length of a user password. If set to
- * 0, empty passwords are allowed.
+ * Namespaces in which $wgNoFollowLinks doesn't apply.
+ * See Language.php for a list of namespaces.
+ */
+$wgNoFollowNsExceptions = array();
+
+/**
+ * If this is set to an array of domains, external links to these domain names
+ * (or any subdomains) will not be set to rel="nofollow" regardless of the
+ * value of $wgNoFollowLinks. For instance:
+ *
+ * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' );
+ *
+ * This would add rel="nofollow" to links to de.wikipedia.org, but not
+ * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org,
+ * etc.
+ */
+$wgNoFollowDomainExceptions = array();
+
+/**
+ * Default robot policy. The default policy is to encourage indexing and fol-
+ * lowing of links. It may be overridden on a per-namespace and/or per-page
+ * basis.
+ */
+$wgDefaultRobotPolicy = 'index,follow';
+
+/**
+ * Robot policies per namespaces. The default policy is given above, the array
+ * is made of namespace constants as defined in includes/Defines.php. You can-
+ * not specify a different default policy for NS_SPECIAL: it is always noindex,
+ * nofollow. This is because a number of special pages (e.g., ListPages) have
+ * many permutations of options that display the same data under redundant
+ * URLs, so search engine spiders risk getting lost in a maze of twisty special
+ * pages, all alike, and never reaching your actual content.
+ *
+ * Example:
+ * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' );
+ */
+$wgNamespaceRobotPolicies = array();
+
+/**
+ * Robot policies per article. These override the per-namespace robot policies.
+ * Must be in the form of an array where the key part is a properly canonical-
+ * ised text form title and the value is a robot policy.
+ * Example:
+ * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow',
+ * 'User:Bob' => 'index,follow' );
+ * Example that DOES NOT WORK because the names are not canonical text forms:
+ * $wgArticleRobotPolicies = array(
+ * # Underscore, not space!
+ * 'Main_Page' => 'noindex,follow',
+ * # "Project", not the actual project name!
+ * 'Project:X' => 'index,follow',
+ * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false for that namespace)!
+ * 'abc' => 'noindex,nofollow'
+ * );
+ */
+$wgArticleRobotPolicies = array();
+
+/**
+ * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words
+ * will not function, so users can't decide whether pages in that namespace are
+ * indexed by search engines. If set to null, default to $wgContentNamespaces.
+ * Example:
+ * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT );
+ */
+$wgExemptFromUserRobotsControl = null;
+
+/**
+ * Specifies the minimal length of a user password. If set to 0, empty pass-
+ * words are allowed.
*/
-$wgMinimalPasswordLength = 0;
+$wgMinimalPasswordLength = 1;
/**
* Activate external editor interface for files and pages
- * See http://meta.wikimedia.org/wiki/Help:External_editors
+ * See http://www.mediawiki.org/wiki/Manual:External_editors
*/
$wgUseExternalEditor = true;
$wgSortSpecialPages = true;
/**
- * Specify the name of a skin that should not be presented in the
- * list of available skins.
- * Use for blacklisting a skin which you do not want to remove
+ * Specify the name of a skin that should not be presented in the list of a-
+ * vailable skins. Use for blacklisting a skin which you do not want to remove
* from the .../skins/ directory
*/
$wgSkipSkin = '';
$wgDisabledActions = array();
/**
- * Disable redirects to special pages and interwiki redirects, which use a 302 and have no "redirected from" link
+ * Disable redirects to special pages and interwiki redirects, which use a 302
+ * and have no "redirected from" link.
*/
$wgDisableHardRedirects = false;
/**
- * Use http.dnsbl.sorbs.net to check for open proxies
+ * Set to false to disable application of access keys and tooltips,
+ * eg to avoid keyboard conflicts with system keys or as a low-level
+ * optimization.
+ */
+$wgEnableTooltipsAndAccesskeys = true;
+
+/**
+ * Whether to use DNS blacklists in $wgDnsBlacklistUrls to check for open proxies
+ * @since 1.16
+ */
+$wgEnableDnsBlacklist = false;
+
+/**
+ * @deprecated Use $wgEnableDnsBlacklist instead, only kept for backward
+ * compatibility
*/
$wgEnableSorbs = false;
/**
- * Use opm.blitzed.org to check for open proxies.
- * Not yet actually used.
+ * List of DNS blacklists to use, if $wgEnableDnsBlacklist is true
+ * @since 1.16
*/
-$wgEnableOpm = false;
+$wgDnsBlacklistUrls = array( 'http.dnsbl.sorbs.net.' );
/**
- * Proxy whitelist, list of addresses that are assumed to be non-proxy despite what the other
- * methods might say
+ * @deprecated Use $wgDnsBlacklistUrls instead, only kept for backward
+ * compatibility
+ */
+$wgSorbsUrl = array();
+
+/**
+ * Proxy whitelist, list of addresses that are assumed to be non-proxy despite
+ * what the other methods might say.
*/
$wgProxyWhitelist = array();
/**
- * Simple rate limiter options to brake edit floods.
- * Maximum number actions allowed in the given number of seconds;
- * after that the violating client receives HTTP 500 error pages
- * until the period elapses.
+ * Simple rate limiter options to brake edit floods. Maximum number actions
+ * allowed in the given number of seconds; after that the violating client re-
+ * ceives HTTP 500 error pages until the period elapses.
*
* array( 4, 60 ) for a maximum of 4 hits in 60 seconds.
*
- * This option set is experimental and likely to change.
- * Requires memcached.
+ * This option set is experimental and likely to change. Requires memcached.
*/
$wgRateLimits = array(
'edit' => array(
'anon' => null, // for any and all anonymous edits (aggregate)
'user' => null, // for each logged-in user
- 'newbie' => null, // for each recent account; overrides 'user'
+ 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user'
'ip' => null, // for each anon and recent account
'subnet' => null, // ... with final octet removed
),
'ip' => null,
'subnet' => null,
),
+ 'mailpassword' => array(
+ 'anon' => null,
+ ),
+ 'emailuser' => array(
+ 'user' => null,
+ ),
);
/**
*/
$wgRateLimitLog = null;
+/**
+ * Array of groups which should never trigger the rate limiter
+ *
+ * @deprecated as of 1.13.0, the preferred method is using
+ * $wgGroupPermissions[]['noratelimit']. However, this will still
+ * work if desired.
+ *
+ * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' );
+ */
+$wgRateLimitsExcludedGroups = array();
+
+/**
+ * Array of IPs which should be excluded from rate limits.
+ * This may be useful for whitelisting NAT gateways for conferences, etc.
+ */
+$wgRateLimitsExcludedIPs = array();
+
/**
* On Special:Unusedimages, consider images "used", if they are put
* into a category. Default (false) is not to count those as used.
/**
* An array of external mysql servers, e.g.
* $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) );
+ * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class.
*/
$wgExternalServers = array();
/**
-* list of trusted media-types and mime types.
-* Use the MEDIATYPE_xxx constants to represent media types.
-* This list is used by Image::isSafeFile
-*
-* Types not listed here will have a warning about unsafe content
-* displayed on the images description page. It would also be possible
-* to use this for further restrictions, like disabling direct
-* [[media:...]] links for non-trusted formats.
-*/
+ * The place to put new revisions, false to put them in the local text table.
+ * Part of a URL, e.g. DB://cluster1
+ *
+ * Can be an array instead of a single string, to enable data distribution. Keys
+ * must be consecutive integers, starting at zero. Example:
+ *
+ * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' );
+ *
+ */
+$wgDefaultExternalStore = false;
+
+/**
+ * Revision text may be cached in $wgMemc to reduce load on external storage
+ * servers and object extraction overhead for frequently-loaded revisions.
+ *
+ * Set to 0 to disable, or number of seconds before cache expiry.
+ */
+$wgRevisionCacheExpiry = 0;
+
+/**
+ * list of trusted media-types and mime types.
+ * Use the MEDIATYPE_xxx constants to represent media types.
+ * This list is used by Image::isSafeFile
+ *
+ * Types not listed here will have a warning about unsafe content
+ * displayed on the images description page. It would also be possible
+ * to use this for further restrictions, like disabling direct
+ * [[media:...]] links for non-trusted formats.
+ */
$wgTrustedMediaFormats= array(
MEDIATYPE_BITMAP, //all bitmap formats
MEDIATYPE_AUDIO, //all audio formats
MEDIATYPE_VIDEO, //all plain video formats
- "image/svg", //svg (only needed if inline rendering of svg is not supported)
+ "image/svg+xml", //svg (only needed if inline rendering of svg is not supported)
"application/pdf", //PDF files
- #"application/x-shockwafe-flash", //flash/shockwave movie
+ #"application/x-shockwave-flash", //flash/shockwave movie
);
/**
$wgAllowSpecialInclusion = true;
/**
- * Timeout for HTTP requests done via CURL
+ * Timeout for HTTP requests done internally
*/
-$wgHTTPTimeout = 3;
+$wgHTTPTimeout = 25;
+
+/**
+ * Timeout for Asynchronous (background) HTTP requests
+ */
+$wgAsyncHTTPTimeout = 25;
/**
* Proxy to use for CURL requests.
* Enable interwiki transcluding. Only when iw_trans=1.
*/
$wgEnableScaryTranscluding = false;
+/**
+ * Expiry time for interwiki transclusion
+ */
+$wgTranscludeCacheExpiry = 3600;
/**
* Support blog-style "trackbacks" for articles. See
*/
$wgUseTrackbacks = false;
-?>
+/**
+ * Enable filtering of categories in Recentchanges
+ */
+$wgAllowCategorizedRecentChanges = false ;
+
+/**
+ * Number of jobs to perform per request. May be less than one in which case
+ * jobs are performed probabalistically. If this is zero, jobs will not be done
+ * during ordinary apache requests. In this case, maintenance/runJobs.php should
+ * be run periodically.
+ */
+$wgJobRunRate = 1;
+
+/**
+ * Number of rows to update per job
+ */
+$wgUpdateRowsPerJob = 500;
+
+/**
+ * Number of rows to update per query
+ */
+$wgUpdateRowsPerQuery = 100;
+
+/**
+ * Enable AJAX framework
+ */
+$wgUseAjax = true;
+
+/**
+ * List of Ajax-callable functions.
+ * Extensions acting as Ajax callbacks must register here
+ */
+$wgAjaxExportList = array( 'wfAjaxGetThumbnailUrl', 'wfAjaxGetFileUrl' );
+
+/**
+ * Enable watching/unwatching pages using AJAX.
+ * Requires $wgUseAjax to be true too.
+ * Causes wfAjaxWatch to be added to $wgAjaxExportList
+ */
+$wgAjaxWatch = true;
+
+/**
+ * Enable AJAX check for file overwrite, pre-upload
+ */
+$wgAjaxUploadDestCheck = true;
+
+/**
+ * Enable previewing licences via AJAX. Also requires $wgEnableAPI to be true.
+ */
+$wgAjaxLicensePreview = true;
+
+/**
+ * Allow DISPLAYTITLE to change title display
+ */
+$wgAllowDisplayTitle = true;
+
+/**
+ * for consistency, restrict DISPLAYTITLE to titles that normalize to the same canonical DB key
+ */
+$wgRestrictDisplayTitle = true;
+
+/**
+ * Array of usernames which may not be registered or logged in from
+ * Maintenance scripts can still use these
+ */
+$wgReservedUsernames = array(
+ 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages
+ 'Conversion script', // Used for the old Wikipedia software upgrade
+ 'Maintenance script', // Maintenance scripts which perform editing, image import script
+ 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade
+ 'msg:double-redirect-fixer', // Automatic double redirect fix
+);
+
+/**
+ * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't
+ * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading
+ * crap files as images. When this directive is on, <title> will be allowed in files with
+ * an "image/svg+xml" MIME type. You should leave this disabled if your web server is misconfigured
+ * and doesn't send appropriate MIME types for SVG images.
+ */
+$wgAllowTitlesInSVG = false;
+
+/**
+ * Array of namespaces which can be deemed to contain valid "content", as far
+ * as the site statistics are concerned. Useful if additional namespaces also
+ * contain "content" which should be considered when generating a count of the
+ * number of articles in the wiki.
+ */
+$wgContentNamespaces = array( NS_MAIN );
+
+/**
+ * Maximum amount of virtual memory available to shell processes under linux, in KB.
+ */
+$wgMaxShellMemory = 102400;
+
+/**
+ * Maximum file size created by shell processes under linux, in KB
+ * ImageMagick convert for example can be fairly hungry for scratch space
+ */
+$wgMaxShellFileSize = 102400;
+
+/**
+ * Maximum CPU time in seconds for shell processes under linux
+ */
+$wgMaxShellTime = 180;
+
+/**
+ * Executable path of the PHP cli binary (php/php5). Should be set up on install.
+ */
+$wgPhpCli = '/usr/bin/php';
+
+/**
+ * DJVU settings
+ * Path of the djvudump executable
+ * Enable this and $wgDjvuRenderer to enable djvu rendering
+ */
+# $wgDjvuDump = 'djvudump';
+$wgDjvuDump = null;
+
+/**
+ * Path of the ddjvu DJVU renderer
+ * Enable this and $wgDjvuDump to enable djvu rendering
+ */
+# $wgDjvuRenderer = 'ddjvu';
+$wgDjvuRenderer = null;
+
+/**
+ * Path of the djvutxt DJVU text extraction utility
+ * Enable this and $wgDjvuDump to enable text layer extraction from djvu files
+ */
+# $wgDjvuTxt = 'djvutxt';
+$wgDjvuTxt = null;
+
+/**
+ * Path of the djvutoxml executable
+ * This works like djvudump except much, much slower as of version 3.5.
+ *
+ * For now I recommend you use djvudump instead. The djvuxml output is
+ * probably more stable, so we'll switch back to it as soon as they fix
+ * the efficiency problem.
+ * http://sourceforge.net/tracker/index.php?func=detail&aid=1704049&group_id=32953&atid=406583
+ */
+# $wgDjvuToXML = 'djvutoxml';
+$wgDjvuToXML = null;
+
+
+/**
+ * Shell command for the DJVU post processor
+ * Default: pnmtopng, since ddjvu generates ppm output
+ * Set this to false to output the ppm file directly.
+ */
+$wgDjvuPostProcessor = 'pnmtojpeg';
+/**
+ * File extension for the DJVU post processor output
+ */
+$wgDjvuOutputExtension = 'jpg';
+
+/**
+ * Enable the MediaWiki API for convenient access to
+ * machine-readable data via api.php
+ *
+ * See http://www.mediawiki.org/wiki/API
+ */
+$wgEnableAPI = true;
+
+/**
+ * Allow the API to be used to perform write operations
+ * (page edits, rollback, etc.) when an authorised user
+ * accesses it
+ */
+$wgEnableWriteAPI = true;
+
+/**
+ * API module extensions
+ * Associative array mapping module name to class name.
+ * Extension modules may override the core modules.
+ */
+$wgAPIModules = array();
+$wgAPIMetaModules = array();
+$wgAPIPropModules = array();
+$wgAPIListModules = array();
+
+/**
+ * Maximum amount of rows to scan in a DB query in the API
+ * The default value is generally fine
+ */
+$wgAPIMaxDBRows = 5000;
+
+/**
+ * The maximum size (in bytes) of an API result.
+ * Don't set this lower than $wgMaxArticleSize*1024
+ */
+$wgAPIMaxResultSize = 8388608;
+
+/**
+ * The maximum number of uncached diffs that can be retrieved in one API
+ * request. Set this to 0 to disable API diffs altogether
+ */
+$wgAPIMaxUncachedDiffs = 1;
+
+/**
+ * Log file or URL (TCP or UDP) to log API requests to, or false to disable
+ * API request logging
+ */
+$wgAPIRequestLog = false;
+
+/**
+ * Cache the API help text for up to an hour. Disable this during API
+ * debugging and development
+ */
+$wgAPICacheHelp = true;
+
+/**
+ * Set the timeout for the API help text cache. Ignored if $wgAPICacheHelp
+ * is false.
+ */
+$wgAPICacheHelpTimeout = 60*60;
+
+/**
+ * Parser test suite files to be run by parserTests.php when no specific
+ * filename is passed to it.
+ *
+ * Extensions may add their own tests to this array, or site-local tests
+ * may be added via LocalSettings.php
+ *
+ * Use full paths.
+ */
+$wgParserTestFiles = array(
+ "$IP/maintenance/parserTests.txt",
+);
+
+/**
+ * If configured, specifies target CodeReview installation to send test
+ * result data from 'parserTests.php --upload'
+ *
+ * Something like this:
+ * $wgParserTestRemote = array(
+ * 'api-url' => 'http://www.mediawiki.org/w/api.php',
+ * 'repo' => 'MediaWiki',
+ * 'suite' => 'ParserTests',
+ * 'path' => '/trunk/phase3', // not used client-side; for reference
+ * 'secret' => 'qmoicj3mc4mcklmqw', // Shared secret used in HMAC validation
+ * );
+ */
+$wgParserTestRemote = false;
+
+/**
+ * Break out of framesets. This can be used to prevent external sites from
+ * framing your site with ads.
+ */
+$wgBreakFrames = false;
+
+/**
+ * Set this to an array of special page names to prevent
+ * maintenance/updateSpecialPages.php from updating those pages.
+ */
+$wgDisableQueryPageUpdate = false;
+
+/**
+ * Disable output compression (enabled by default if zlib is available)
+ */
+$wgDisableOutputCompression = false;
+
+/**
+ * If lag is higher than $wgSlaveLagWarning, show a warning in some special
+ * pages (like watchlist). If the lag is higher than $wgSlaveLagCritical,
+ * show a more obvious warning.
+ */
+$wgSlaveLagWarning = 10;
+$wgSlaveLagCritical = 30;
+
+/**
+ * Parser configuration. Associative array with the following members:
+ *
+ * class The class name
+ *
+ * preprocessorClass The preprocessor class. Two classes are currently available:
+ * Preprocessor_Hash, which uses plain PHP arrays for tempoarary
+ * storage, and Preprocessor_DOM, which uses the DOM module for
+ * temporary storage. Preprocessor_DOM generally uses less memory;
+ * the speed of the two is roughly the same.
+ *
+ * If this parameter is not given, it uses Preprocessor_DOM if the
+ * DOM module is available, otherwise it uses Preprocessor_Hash.
+ *
+ * The entire associative array will be passed through to the constructor as
+ * the first parameter. Note that only Setup.php can use this variable --
+ * the configuration will change at runtime via $wgParser member functions, so
+ * the contents of this variable will be out-of-date. The variable can only be
+ * changed during LocalSettings.php, in particular, it can't be changed during
+ * an extension setup function.
+ */
+$wgParserConf = array(
+ 'class' => 'Parser',
+ #'preprocessorClass' => 'Preprocessor_Hash',
+);
+
+/**
+ * LinkHolderArray batch size
+ * For debugging
+ */
+$wgLinkHolderBatchSize = 1000;
+
+/**
+ * By default MediaWiki does not register links pointing to same server in externallinks dataset,
+ * use this value to override:
+ */
+$wgRegisterInternalExternals = false;
+
+/**
+ * Hooks that are used for outputting exceptions. Format is:
+ * $wgExceptionHooks[] = $funcname
+ * or:
+ * $wgExceptionHooks[] = array( $class, $funcname )
+ * Hooks should return strings or false
+ */
+$wgExceptionHooks = array();
+
+/**
+ * Page property link table invalidation lists. When a page property
+ * changes, this may require other link tables to be updated (eg
+ * adding __HIDDENCAT__ means the hiddencat tracking category will
+ * have been added, so the categorylinks table needs to be rebuilt).
+ * This array can be added to by extensions.
+ */
+$wgPagePropLinkInvalidations = array(
+ 'hiddencat' => 'categorylinks',
+);
+
+/**
+ * Maximum number of links to a redirect page listed on
+ * Special:Whatlinkshere/RedirectDestination
+ */
+$wgMaxRedirectLinksRetrieved = 500;
+
+/**
+ * Maximum number of calls per parse to expensive parser functions such as
+ * PAGESINCATEGORY.
+ */
+$wgExpensiveParserFunctionLimit = 100;
+
+/**
+ * Maximum number of pages to move at once when moving subpages with a page.
+ */
+$wgMaximumMovedPages = 100;
+
+/**
+ * Fix double redirects after a page move.
+ * Tends to conflict with page move vandalism, use only on a private wiki.
+ */
+$wgFixDoubleRedirects = false;
+
+/**
+ * Max number of redirects to follow when resolving redirects.
+ * 1 means only the first redirect is followed (default behavior).
+ * 0 or less means no redirects are followed.
+ */
+$wgMaxRedirects = 1;
+
+/**
+ * Array of invalid page redirect targets.
+ * Attempting to create a redirect to any of the pages in this array
+ * will make the redirect fail.
+ * Userlogout is hard-coded, so it does not need to be listed here.
+ * (bug 10569) Disallow Mypage and Mytalk as well.
+ *
+ * As of now, this only checks special pages. Redirects to pages in
+ * other namespaces cannot be invalidated by this variable.
+ */
+$wgInvalidRedirectTargets = array( 'Filepath', 'Mypage', 'Mytalk' );
+
+/**
+ * Array of namespaces to generate a sitemap for when the
+ * maintenance/generateSitemap.php script is run, or false if one is to be ge-
+ * nerated for all namespaces.
+ */
+$wgSitemapNamespaces = false;
+
+
+/**
+ * If user doesn't specify any edit summary when making a an edit, MediaWiki
+ * will try to automatically create one. This feature can be disabled by set-
+ * ting this variable false.
+ */
+$wgUseAutomaticEditSummaries = true;
+
+/**
+ * Limit password attempts to X attempts per Y seconds per IP per account.
+ * Requires memcached.
+ */
+$wgPasswordAttemptThrottle = array( 'count' => 5, 'seconds' => 300 );
+
+/**
+ * Display user edit counts in various prominent places.
+ */
+$wgEdititis = false;
+
+/**
+ * Enable the UniversalEditButton for browsers that support it
+ * (currently only Firefox with an extension)
+ * See http://universaleditbutton.org for more background information
+ */
+$wgUniversalEditButton = true;
+
+/**
+ * Should we allow a broader set of characters in id attributes, per HTML5? If
+ * not, use only HTML 4-compatible IDs. This option is for testing -- when the
+ * functionality is ready, it will be on by default with no option.
+ *
+ * Currently this appears to work fine in Chrome 4 and 5, Firefox 3.5 and 3.6, IE6
+ * and 8, and Opera 10.50, but it fails in Opera 10.10: Unicode IDs don't seem
+ * to work as anchors. So not quite ready for general use yet.
+ */
+$wgExperimentalHtmlIds = false;
+
+/**
+ * Search form behavior
+ * true = use Go & Search buttons
+ * false = use Go button & Advanced search link
+ */
+$wgUseTwoButtonsSearchForm = true;
+
+/**
+ * Search form behavior for Vector skin only
+ * true = use an icon search button
+ * false = use Go & Search buttons
+ */
+$wgVectorUseSimpleSearch = false;
+
+/**
+ * Watch and unwatch as an icon rather than a link for Vector skin only
+ * true = use an icon watch/unwatch button
+ * false = use watch/unwatch text link
+ */
+$wgVectorUseIconWatch = false;
+
+/**
+ * Add extra stylesheets for Vector - This is only being used so that we can play around with different options while
+ * keeping our CSS code in the SVN and not having to change the main Vector styles. This will probably go away later on.
+ * null = add no extra styles
+ * array = list of style paths relative to skins/vector/
+ */
+$wgVectorExtraStyles = null;
+
+/**
+ * Preprocessor caching threshold
+ */
+$wgPreprocessorCacheThreshold = 1000;
+
+/**
+ * Allow filtering by change tag in recentchanges, history, etc
+ * Has no effect if no tags are defined in valid_tag.
+ */
+$wgUseTagFilter = true;
+
+/**
+ * Allow redirection to another page when a user logs in.
+ * To enable, set to a string like 'Main Page'
+ */
+$wgRedirectOnLogin = null;
+
+/**
+ * Characters to prevent during new account creations.
+ * This is used in a regular expression character class during
+ * registration (regex metacharacters like / are escaped).
+ */
+$wgInvalidUsernameCharacters = '@';
+
+/**
+ * Character used as a delimiter when testing for interwiki userrights
+ * (In Special:UserRights, it is possible to modify users on different
+ * databases if the delimiter is used, e.g. Someuser@enwiki).
+ *
+ * It is recommended that you have this delimiter in
+ * $wgInvalidUsernameCharacters above, or you will not be able to
+ * modify the user rights of those users via Special:UserRights
+ */
+$wgUserrightsInterwikiDelimiter = '@';
+
+/**
+ * Configuration for processing pool control, for use in high-traffic wikis.
+ * An implementation is provided in the PoolCounter extension.
+ *
+ * This configuration array maps pool types to an associative array. The only
+ * defined key in the associative array is "class", which gives the class name.
+ * The remaining elements are passed through to the class as constructor
+ * parameters. Example:
+ *
+ * $wgPoolCounterConf = array( 'Article::view' => array(
+ * 'class' => 'PoolCounter_Client',
+ * ... any extension-specific options...
+ * );
+ */
+$wgPoolCounterConf = null;
+
+/**
+ * Use some particular type of external authentication. The specific
+ * authentication module you use will normally require some extra settings to
+ * be specified.
+ *
+ * null indicates no external authentication is to be used. Otherwise,
+ * $wgExternalAuthType must be the name of a non-abstract class that extends
+ * ExternalUser.
+ *
+ * Core authentication modules can be found in includes/extauth/.
+ */
+$wgExternalAuthType = null;
+
+/**
+ * Configuration for the external authentication. This may include arbitrary
+ * keys that depend on the authentication mechanism. For instance,
+ * authentication against another web app might require that the database login
+ * info be provided. Check the file where your auth mechanism is defined for
+ * info on what to put here.
+ */
+$wgExternalAuthConfig = array();
+
+/**
+ * When should we automatically create local accounts when external accounts
+ * already exist, if using ExternalAuth? Can have three values: 'never',
+ * 'login', 'view'. 'view' requires the external database to support cookies,
+ * and implies 'login'.
+ *
+ * TODO: Implement 'view' (currently behaves like 'login').
+ */
+$wgAutocreatePolicy = 'login';
+
+/**
+ * Policies for how each preference is allowed to be changed, in the presence
+ * of external authentication. The keys are preference keys, e.g., 'password'
+ * or 'emailaddress' (see Preferences.php et al.). The value can be one of the
+ * following:
+ *
+ * - local: Allow changes to this pref through the wiki interface but only
+ * apply them locally (default).
+ * - semiglobal: Allow changes through the wiki interface and try to apply them
+ * to the foreign database, but continue on anyway if that fails.
+ * - global: Allow changes through the wiki interface, but only let them go
+ * through if they successfully update the foreign database.
+ * - message: Allow no local changes for linked accounts; replace the change
+ * form with a message provided by the auth plugin, telling the user how to
+ * change the setting externally (maybe providing a link, etc.). If the auth
+ * plugin provides no message for this preference, hide it entirely.
+ *
+ * Accounts that are not linked to an external account are never affected by
+ * this setting. You may want to look at $wgHiddenPrefs instead.
+ * $wgHiddenPrefs supersedes this option.
+ *
+ * TODO: Implement message, global.
+ */
+$wgAllowPrefChange = array();
+
+
+/**
+ * Settings for incoming cross-site AJAX requests:
+ * Newer browsers support cross-site AJAX when the target resource allows requests
+ * from the origin domain by the Access-Control-Allow-Origin header.
+ * This is currently only used by the API (requests to api.php)
+ * $wgCrossSiteAJAXdomains can be set using a wildcard syntax:
+ *
+ * '*' matches any number of characters
+ * '?' matches any 1 character
+ *
+ * Example:
+ $wgCrossSiteAJAXdomains = array(
+ 'www.mediawiki.org',
+ '*.wikipedia.org',
+ '*.wikimedia.org',
+ '*.wiktionary.org',
+ );
+ *
+ */
+$wgCrossSiteAJAXdomains = array();
+
+/**
+ * Domains that should not be allowed to make AJAX requests,
+ * even if they match one of the domains allowed by $wgCrossSiteAJAXdomains
+ * Uses the same syntax as $wgCrossSiteAJAXdomains
+ */
+
+$wgCrossSiteAJAXdomainExceptions = array();
+
+/**
+ * The minimum amount of memory that MediaWiki "needs"; MediaWiki will try to raise PHP's memory limit if it's below this amount.
+ */
+$wgMemoryLimit = "50M";
+
+/**
+ * To disable file delete/restore temporarily
+ */
+$wgUploadMaintenance = false;
+
+/**
+ * Use old names for change_tags indices.
+ */
+$wgOldChangeTagsIndex = false;
+
scripts.mit.edu / autoinstallsdev / mediawiki.git / blobdiff