sys_get_temp_dir(), before finally defaulting to /tmp/
- *
- * In the event that this function does not find a writable location, It may be overridden by the WP_TEMP_DIR constant in your wp-config.php file.
- *
- * @since 2.5.0
- *
- * @return string Writable temporary directory
- */
-function get_temp_dir() {
- if ( defined('WP_TEMP_DIR') )
- return trailingslashit(WP_TEMP_DIR);
-
- $temp = WP_CONTENT_DIR . '/';
- if ( is_dir($temp) && is_writable($temp) )
- return $temp;
-
- if ( function_exists('sys_get_temp_dir') )
- return trailingslashit(sys_get_temp_dir());
-
- return '/tmp/';
-}
-
/**
* Returns a filename of a Temporary unique file.
* Please note that the calling function must unlink() this itself.
*
* The filename is based off the passed parameter or defaults to the current unix timestamp,
- * while the directory can either be passed as well, or by leaving it blank, default to a writable temporary directory.
+ * while the directory can either be passed as well, or by leaving it blank, default to a writable temporary directory.
*
* @since 2.6.0
*
@@ -172,7 +165,7 @@ function get_temp_dir() {
* @param string $dir (optional) Directory to store the file in
* @return string a writable filename
*/
-function wp_tempnam($filename = '', $dir = ''){
+function wp_tempnam($filename = '', $dir = '') {
if ( empty($dir) )
$dir = get_temp_dir();
$filename = basename($filename);
@@ -186,13 +179,17 @@ function wp_tempnam($filename = '', $dir = ''){
}
/**
- * {@internal Missing Short Description}}
+ * Make sure that the file that was requested to edit, is allowed to be edited
*
- * @since unknown
+ * Function will die if if you are not allowed to edit the file
*
- * @param unknown_type $file
- * @param unknown_type $allowed_files
- * @return unknown
+ * @since 1.5.0
+ *
+ * @uses wp_die
+ * @uses validate_file
+ * @param string $file file the users is attempting to edit
+ * @param array $allowed_files Array of allowed files to edit, $file must match an entry exactly
+ * @return null
*/
function validate_file_to_edit( $file, $allowed_files = '' ) {
$code = validate_file( $file, $allowed_files );
@@ -213,17 +210,26 @@ function validate_file_to_edit( $file, $allowed_files = '' ) {
}
/**
- * {@internal Missing Short Description}}
+ * Handle PHP uploads in WordPress, sanitizing file names, checking extensions for mime type,
+ * and moving the file to the appropriate directory within the uploads directory.
*
- * @since unknown
+ * @since 2.0
*
+ * @uses wp_handle_upload_error
+ * @uses apply_filters
+ * @uses is_multisite
+ * @uses wp_check_filetype_and_ext
+ * @uses current_user_can
+ * @uses wp_upload_dir
+ * @uses wp_unique_filename
+ * @uses delete_transient
* @param array $file Reference to a single element of $_FILES. Call the function once for each uploaded file.
* @param array $overrides Optional. An associative array of names=>values to override default variables with extract( $overrides, EXTR_OVERWRITE ).
* @return array On success, returns an associative array of file attributes. On failure, returns $overrides['upload_error_handler'](&$file, $message ) or array( 'error'=>$message ).
*/
function wp_handle_upload( &$file, $overrides = false, $time = null ) {
// The default error handler.
- if (! function_exists( 'wp_handle_upload_error' ) ) {
+ if ( ! function_exists( 'wp_handle_upload_error' ) ) {
function wp_handle_upload_error( &$file, $message ) {
return array( 'error'=>$message );
}
@@ -234,7 +240,7 @@ function wp_handle_upload( &$file, $overrides = false, $time = null ) {
// You may define your own function and pass the name in $overrides['upload_error_handler']
$upload_error_handler = 'wp_handle_upload_error';
- // You may have had one or more 'wp_handle_upload_prefilter' functions error out the file. Handle that gracefully.
+ // You may have had one or more 'wp_handle_upload_prefilter' functions error out the file. Handle that gracefully.
if ( isset( $file['error'] ) && !is_numeric( $file['error'] ) && $file['error'] )
return $upload_error_handler( $file, $file['error'] );
@@ -246,8 +252,8 @@ function wp_handle_upload( &$file, $overrides = false, $time = null ) {
// Courtesy of php.net, the strings that describe the error indicated in $_FILES[{form field}]['error'].
$upload_error_strings = array( false,
- __( "The uploaded file exceeds the upload_max_filesize directive in php.ini." ),
- __( "The uploaded file exceeds the MAX_FILE_SIZE directive that was specified in the HTML form." ),
+ __( "The uploaded file exceeds the upload_max_filesize directive in php.ini." ),
+ __( "The uploaded file exceeds the MAX_FILE_SIZE directive that was specified in the HTML form." ),
__( "The uploaded file was only partially uploaded." ),
__( "No file was uploaded." ),
'',
@@ -255,9 +261,10 @@ function wp_handle_upload( &$file, $overrides = false, $time = null ) {
__( "Failed to write file to disk." ),
__( "File upload stopped by extension." ));
- // All tests are on by default. Most can be turned off by $override[{test_name}] = false;
+ // All tests are on by default. Most can be turned off by $overrides[{test_name}] = false;
$test_form = true;
$test_size = true;
+ $test_upload = true;
// If you override this, you must provide $ext and $type!!!!
$test_type = true;
@@ -269,28 +276,37 @@ function wp_handle_upload( &$file, $overrides = false, $time = null ) {
// A correct form post will pass this test.
if ( $test_form && (!isset( $_POST['action'] ) || ($_POST['action'] != $action ) ) )
- return $upload_error_handler( $file, __( 'Invalid form submission.' ));
+ return call_user_func($upload_error_handler, $file, __( 'Invalid form submission.' ));
// A successful upload will pass this test. It makes no sense to override this one.
if ( $file['error'] > 0 )
- return $upload_error_handler( $file, $upload_error_strings[$file['error']] );
+ return call_user_func($upload_error_handler, $file, $upload_error_strings[$file['error']] );
// A non-empty file will pass this test.
- if ( $test_size && !($file['size'] > 0 ) )
- return $upload_error_handler( $file, __( 'File is empty. Please upload something more substantial. This error could also be caused by uploads being disabled in your php.ini or by post_max_size being defined as smaller than upload_max_filesize in php.ini.' ));
+ if ( $test_size && !($file['size'] > 0 ) ) {
+ if ( is_multisite() )
+ $error_msg = __( 'File is empty. Please upload something more substantial.' );
+ else
+ $error_msg = __( 'File is empty. Please upload something more substantial. This error could also be caused by uploads being disabled in your php.ini or by post_max_size being defined as smaller than upload_max_filesize in php.ini.' );
+ return call_user_func($upload_error_handler, $file, $error_msg);
+ }
// A properly uploaded file will pass this test. There should be no reason to override this one.
- if (! @ is_uploaded_file( $file['tmp_name'] ) )
- return $upload_error_handler( $file, __( 'Specified file failed upload test.' ));
+ if ( $test_upload && ! @ is_uploaded_file( $file['tmp_name'] ) )
+ return call_user_func($upload_error_handler, $file, __( 'Specified file failed upload test.' ));
// A correct MIME type will pass this test. Override $mimes or use the upload_mimes filter.
if ( $test_type ) {
- $wp_filetype = wp_check_filetype( $file['name'], $mimes );
+ $wp_filetype = wp_check_filetype_and_ext( $file['tmp_name'], $file['name'], $mimes );
extract( $wp_filetype );
+ // Check to see if wp_check_filetype_and_ext() determined the filename was incorrect
+ if ( $proper_filename )
+ $file['name'] = $proper_filename;
+
if ( ( !$type || !$ext ) && !current_user_can( 'unfiltered_upload' ) )
- return $upload_error_handler( $file, __( 'File type does not meet security guidelines. Try another.' ));
+ return call_user_func($upload_error_handler, $file, __( 'Sorry, this file type is not permitted for security reasons.' ));
if ( !$ext )
$ext = ltrim(strrchr($file['name'], '.'), '.');
@@ -303,15 +319,14 @@ function wp_handle_upload( &$file, $overrides = false, $time = null ) {
// A writable uploads dir will pass this test. Again, there's no point overriding this one.
if ( ! ( ( $uploads = wp_upload_dir($time) ) && false === $uploads['error'] ) )
- return $upload_error_handler( $file, $uploads['error'] );
+ return call_user_func($upload_error_handler, $file, $uploads['error'] );
$filename = wp_unique_filename( $uploads['path'], $file['name'], $unique_filename_callback );
// Move the file to the uploads dir
$new_file = $uploads['path'] . "/$filename";
- if ( false === @ move_uploaded_file( $file['tmp_name'], $new_file ) ) {
+ if ( false === @ move_uploaded_file( $file['tmp_name'], $new_file ) )
return $upload_error_handler( $file, sprintf( __('The uploaded file could not be moved to %s.' ), $uploads['path'] ) );
- }
// Set correct file permissions
$stat = stat( dirname( $new_file ));
@@ -321,19 +336,28 @@ function wp_handle_upload( &$file, $overrides = false, $time = null ) {
// Compute the URL
$url = $uploads['url'] . "/$filename";
- return apply_filters( 'wp_handle_upload', array( 'file' => $new_file, 'url' => $url, 'type' => $type ) );
+ if ( is_multisite() )
+ delete_transient( 'dirsize_cache' );
+
+ return apply_filters( 'wp_handle_upload', array( 'file' => $new_file, 'url' => $url, 'type' => $type ), 'upload' );
}
/**
- * {@internal Missing Short Description}}
- *
- * Pass this function an array similar to that of a $_FILES POST array.
+ * Handle sideloads, which is the process of retrieving a media item from another server instead of
+ * a traditional media upload. This process involves sanitizing the filename, checking extensions
+ * for mime type, and moving the file to the appropriate directory within the uploads directory.
*
- * @since unknown
+ * @since 2.6.0
*
- * @param unknown_type $file
- * @param unknown_type $overrides
- * @return unknown
+ * @uses wp_handle_upload_error
+ * @uses apply_filters
+ * @uses wp_check_filetype_and_ext
+ * @uses current_user_can
+ * @uses wp_upload_dir
+ * @uses wp_unique_filename
+ * @param array $file an array similar to that of a PHP $_FILES POST array
+ * @param array $overrides Optional. An associative array of names=>values to override default variables with extract( $overrides, EXTR_OVERWRITE ).
+ * @return array On success, returns an associative array of file attributes. On failure, returns $overrides['upload_error_handler'](&$file, $message ) or array( 'error'=>$message ).
*/
function wp_handle_sideload( &$file, $overrides = false ) {
// The default error handler.
@@ -363,7 +387,7 @@ function wp_handle_sideload( &$file, $overrides = false ) {
__( "Failed to write file to disk." ),
__( "File upload stopped by extension." ));
- // All tests are on by default. Most can be turned off by $override[{test_name}] = false;
+ // All tests are on by default. Most can be turned off by $overrides[{test_name}] = false;
$test_form = true;
$test_size = true;
@@ -380,7 +404,7 @@ function wp_handle_sideload( &$file, $overrides = false ) {
return $upload_error_handler( $file, __( 'Invalid form submission.' ));
// A successful upload will pass this test. It makes no sense to override this one.
- if ( $file['error'] > 0 )
+ if ( ! empty( $file['error'] ) )
return $upload_error_handler( $file, $upload_error_strings[$file['error']] );
// A non-empty file will pass this test.
@@ -393,12 +417,16 @@ function wp_handle_sideload( &$file, $overrides = false ) {
// A correct MIME type will pass this test. Override $mimes or use the upload_mimes filter.
if ( $test_type ) {
- $wp_filetype = wp_check_filetype( $file['name'], $mimes );
+ $wp_filetype = wp_check_filetype_and_ext( $file['tmp_name'], $file['name'], $mimes );
extract( $wp_filetype );
+ // Check to see if wp_check_filetype_and_ext() determined the filename was incorrect
+ if ( $proper_filename )
+ $file['name'] = $proper_filename;
+
if ( ( !$type || !$ext ) && !current_user_can( 'unfiltered_upload' ) )
- return $upload_error_handler( $file, __( 'File type does not meet security guidelines. Try another.' ));
+ return $upload_error_handler( $file, __( 'Sorry, this file type is not permitted for security reasons.' ));
if ( !$ext )
$ext = ltrim(strrchr($file['name'], '.'), '.');
@@ -431,56 +459,48 @@ function wp_handle_sideload( &$file, $overrides = false ) {
// Compute the URL
$url = $uploads['url'] . "/$filename";
- $return = apply_filters( 'wp_handle_upload', array( 'file' => $new_file, 'url' => $url, 'type' => $type ) );
+ $return = apply_filters( 'wp_handle_upload', array( 'file' => $new_file, 'url' => $url, 'type' => $type ), 'sideload' );
return $return;
}
/**
* Downloads a url to a local temporary file using the WordPress HTTP Class.
- * Please note, That the calling function must unlink() the file.
+ * Please note, That the calling function must unlink() the file.
*
* @since 2.5.0
*
* @param string $url the URL of the file to download
+ * @param int $timeout The timeout for the request to download the file default 300 seconds
* @return mixed WP_Error on failure, string Filename on success.
*/
-function download_url( $url ) {
+function download_url( $url, $timeout = 300 ) {
//WARNING: The file is not automatically deleted, The script must unlink() the file.
if ( ! $url )
- return new WP_Error('http_no_url', __('Invalid URL Provided'));
+ return new WP_Error('http_no_url', __('Invalid URL Provided.'));
$tmpfname = wp_tempnam($url);
if ( ! $tmpfname )
- return new WP_Error('http_no_file', __('Could not create Temporary file'));
-
- $handle = @fopen($tmpfname, 'wb');
- if ( ! $handle )
- return new WP_Error('http_no_file', __('Could not create Temporary file'));
+ return new WP_Error('http_no_file', __('Could not create Temporary file.'));
- $response = wp_remote_get($url, array('timeout' => 300));
+ $response = wp_remote_get( $url, array( 'timeout' => $timeout, 'stream' => true, 'filename' => $tmpfname ) );
- if ( is_wp_error($response) ) {
- fclose($handle);
- unlink($tmpfname);
+ if ( is_wp_error( $response ) ) {
+ unlink( $tmpfname );
return $response;
}
- if ( $response['response']['code'] != '200' ){
- fclose($handle);
- unlink($tmpfname);
- return new WP_Error('http_404', trim($response['response']['message']));
+ if ( 200 != wp_remote_retrieve_response_code( $response ) ){
+ unlink( $tmpfname );
+ return new WP_Error( 'http_404', trim( wp_remote_retrieve_response_message( $response ) ) );
}
- fwrite($handle, $response['body']);
- fclose($handle);
-
return $tmpfname;
}
/**
- * Unzip's a specified ZIP file to a location on the Filesystem via the WordPress Filesystem Abstraction.
- * Assumes that WP_Filesystem() has already been called and set up.
+ * Unzips a specified ZIP file to a location on the Filesystem via the WordPress Filesystem Abstraction.
+ * Assumes that WP_Filesystem() has already been called and set up. Does not extract a root-level __MACOSX directory, if present.
*
* Attempts to increase the PHP Memory limit to 256M before uncompressing,
* However, The most memory required shouldn't be much larger than the Archive itself.
@@ -497,59 +517,204 @@ function unzip_file($file, $to) {
if ( ! $wp_filesystem || !is_object($wp_filesystem) )
return new WP_Error('fs_unavailable', __('Could not access filesystem.'));
- // Unzip uses a lot of memory, but not this much hopefully
- @ini_set('memory_limit', '256M');
+ // Unzip can use a lot of memory, but not this much hopefully
+ @ini_set( 'memory_limit', apply_filters( 'admin_memory_limit', WP_MAX_MEMORY_LIMIT ) );
+
+ $needed_dirs = array();
+ $to = trailingslashit($to);
+
+ // Determine any parent dir's needed (of the upgrade directory)
+ if ( ! $wp_filesystem->is_dir($to) ) { //Only do parents if no children exist
+ $path = preg_split('![/\\\]!', untrailingslashit($to));
+ for ( $i = count($path); $i >= 0; $i-- ) {
+ if ( empty($path[$i]) )
+ continue;
+
+ $dir = implode('/', array_slice($path, 0, $i+1) );
+ if ( preg_match('!^[a-z]:$!i', $dir) ) // Skip it if it looks like a Windows Drive letter.
+ continue;
+
+ if ( ! $wp_filesystem->is_dir($dir) )
+ $needed_dirs[] = $dir;
+ else
+ break; // A folder exists, therefor, we dont need the check the levels below this
+ }
+ }
+
+ if ( class_exists('ZipArchive') && apply_filters('unzip_file_use_ziparchive', true ) ) {
+ $result = _unzip_file_ziparchive($file, $to, $needed_dirs);
+ if ( true === $result ) {
+ return $result;
+ } elseif ( is_wp_error($result) ) {
+ if ( 'incompatible_archive' != $result->get_error_code() )
+ return $result;
+ }
+ }
+ // Fall through to PclZip if ZipArchive is not available, or encountered an error opening the file.
+ return _unzip_file_pclzip($file, $to, $needed_dirs);
+}
+
+/**
+ * This function should not be called directly, use unzip_file instead. Attempts to unzip an archive using the ZipArchive class.
+ * Assumes that WP_Filesystem() has already been called and set up.
+ *
+ * @since 3.0.0
+ * @see unzip_file
+ * @access private
+ *
+ * @param string $file Full path and filename of zip archive
+ * @param string $to Full path on the filesystem to extract archive to
+ * @param array $needed_dirs A partial list of required folders needed to be created.
+ * @return mixed WP_Error on failure, True on success
+ */
+function _unzip_file_ziparchive($file, $to, $needed_dirs = array() ) {
+ global $wp_filesystem;
+
+ $z = new ZipArchive();
+
+ // PHP4-compat - php4 classes can't contain constants
+ $zopen = $z->open($file, /* ZIPARCHIVE::CHECKCONS */ 4);
+ if ( true !== $zopen )
+ return new WP_Error('incompatible_archive', __('Incompatible Archive.'));
+
+ for ( $i = 0; $i < $z->numFiles; $i++ ) {
+ if ( ! $info = $z->statIndex($i) )
+ return new WP_Error('stat_failed', __('Could not retrieve file from archive.'));
+
+ if ( '__MACOSX/' === substr($info['name'], 0, 9) ) // Skip the OS X-created __MACOSX directory
+ continue;
- $fs =& $wp_filesystem;
+ if ( '/' == substr($info['name'], -1) ) // directory
+ $needed_dirs[] = $to . untrailingslashit($info['name']);
+ else
+ $needed_dirs[] = $to . untrailingslashit(dirname($info['name']));
+ }
+
+ $needed_dirs = array_unique($needed_dirs);
+ foreach ( $needed_dirs as $dir ) {
+ // Check the parent folders of the folders all exist within the creation array.
+ if ( untrailingslashit($to) == $dir ) // Skip over the working directory, We know this exists (or will exist)
+ continue;
+ if ( strpos($dir, $to) === false ) // If the directory is not within the working directory, Skip it
+ continue;
+
+ $parent_folder = dirname($dir);
+ while ( !empty($parent_folder) && untrailingslashit($to) != $parent_folder && !in_array($parent_folder, $needed_dirs) ) {
+ $needed_dirs[] = $parent_folder;
+ $parent_folder = dirname($parent_folder);
+ }
+ }
+ asort($needed_dirs);
+
+ // Create those directories if need be:
+ foreach ( $needed_dirs as $_dir ) {
+ if ( ! $wp_filesystem->mkdir($_dir, FS_CHMOD_DIR) && ! $wp_filesystem->is_dir($_dir) ) // Only check to see if the Dir exists upon creation failure. Less I/O this way.
+ return new WP_Error('mkdir_failed', __('Could not create directory.'), $_dir);
+ }
+ unset($needed_dirs);
+
+ for ( $i = 0; $i < $z->numFiles; $i++ ) {
+ if ( ! $info = $z->statIndex($i) )
+ return new WP_Error('stat_failed', __('Could not retrieve file from archive.'));
+
+ if ( '/' == substr($info['name'], -1) ) // directory
+ continue;
+
+ if ( '__MACOSX/' === substr($info['name'], 0, 9) ) // Don't extract the OS X-created __MACOSX directory files
+ continue;
+
+ $contents = $z->getFromIndex($i);
+ if ( false === $contents )
+ return new WP_Error('extract_failed', __('Could not extract file from archive.'), $info['name']);
+
+ if ( ! $wp_filesystem->put_contents( $to . $info['name'], $contents, FS_CHMOD_FILE) )
+ return new WP_Error('copy_failed', __('Could not copy file.'), $to . $info['name']);
+ }
+
+ $z->close();
+
+ return true;
+}
+
+/**
+ * This function should not be called directly, use unzip_file instead. Attempts to unzip an archive using the PclZip library.
+ * Assumes that WP_Filesystem() has already been called and set up.
+ *
+ * @since 3.0.0
+ * @see unzip_file
+ * @access private
+ *
+ * @param string $file Full path and filename of zip archive
+ * @param string $to Full path on the filesystem to extract archive to
+ * @param array $needed_dirs A partial list of required folders needed to be created.
+ * @return mixed WP_Error on failure, True on success
+ */
+function _unzip_file_pclzip($file, $to, $needed_dirs = array()) {
+ global $wp_filesystem;
+
+ // See #15789 - PclZip uses string functions on binary data, If it's overloaded with Multibyte safe functions the results are incorrect.
+ if ( ini_get('mbstring.func_overload') && function_exists('mb_internal_encoding') ) {
+ $previous_encoding = mb_internal_encoding();
+ mb_internal_encoding('ISO-8859-1');
+ }
require_once(ABSPATH . 'wp-admin/includes/class-pclzip.php');
$archive = new PclZip($file);
+ $archive_files = $archive->extract(PCLZIP_OPT_EXTRACT_AS_STRING);
+
+ if ( isset($previous_encoding) )
+ mb_internal_encoding($previous_encoding);
+
// Is the archive valid?
- if ( false == ($archive_files = $archive->extract(PCLZIP_OPT_EXTRACT_AS_STRING)) )
- return new WP_Error('incompatible_archive', __('Incompatible archive'), $archive->errorInfo(true));
+ if ( !is_array($archive_files) )
+ return new WP_Error('incompatible_archive', __('Incompatible Archive.'), $archive->errorInfo(true));
if ( 0 == count($archive_files) )
- return new WP_Error('empty_archive', __('Empty archive'));
-
- $path = explode('/', untrailingslashit($to));
- for ( $i = count($path); $i > 0; $i-- ) { //>0 = first element is empty allways for paths starting with '/'
- $tmppath = implode('/', array_slice($path, 0, $i) );
- if ( $fs->is_dir($tmppath) ) { //Found the highest folder that exists, Create from here(ie +1)
- for ( $i = $i + 1; $i <= count($path); $i++ ) {
- $tmppath = implode('/', array_slice($path, 0, $i) );
- if ( ! $fs->mkdir($tmppath, FS_CHMOD_DIR) )
- return new WP_Error('mkdir_failed', __('Could not create directory'), $tmppath);
- }
- break; //Exit main for loop
- }
+ return new WP_Error('empty_archive', __('Empty archive.'));
+
+ // Determine any children directories needed (From within the archive)
+ foreach ( $archive_files as $file ) {
+ if ( '__MACOSX/' === substr($file['filename'], 0, 9) ) // Skip the OS X-created __MACOSX directory
+ continue;
+
+ $needed_dirs[] = $to . untrailingslashit( $file['folder'] ? $file['filename'] : dirname($file['filename']) );
}
- $to = trailingslashit($to);
- foreach ($archive_files as $file) {
- $path = $file['folder'] ? $file['filename'] : dirname($file['filename']);
- $path = explode('/', $path);
- for ( $i = count($path); $i >= 0; $i-- ) { //>=0 as the first element contains data
- if ( empty($path[$i]) )
- continue;
- $tmppath = $to . implode('/', array_slice($path, 0, $i) );
- if ( $fs->is_dir($tmppath) ) {//Found the highest folder that exists, Create from here
- for ( $i = $i + 1; $i <= count($path); $i++ ) { //< count() no file component please.
- $tmppath = $to . implode('/', array_slice($path, 0, $i) );
- if ( ! $fs->is_dir($tmppath) && ! $fs->mkdir($tmppath, FS_CHMOD_DIR) )
- return new WP_Error('mkdir_failed', __('Could not create directory'), $tmppath);
- }
- break; //Exit main for loop
- }
+ $needed_dirs = array_unique($needed_dirs);
+ foreach ( $needed_dirs as $dir ) {
+ // Check the parent folders of the folders all exist within the creation array.
+ if ( untrailingslashit($to) == $dir ) // Skip over the working directory, We know this exists (or will exist)
+ continue;
+ if ( strpos($dir, $to) === false ) // If the directory is not within the working directory, Skip it
+ continue;
+
+ $parent_folder = dirname($dir);
+ while ( !empty($parent_folder) && untrailingslashit($to) != $parent_folder && !in_array($parent_folder, $needed_dirs) ) {
+ $needed_dirs[] = $parent_folder;
+ $parent_folder = dirname($parent_folder);
}
+ }
+ asort($needed_dirs);
- // We've made sure the folders are there, so let's extract the file now:
- if ( ! $file['folder'] ) {
- if ( !$fs->put_contents( $to . $file['filename'], $file['content']) )
- return new WP_Error('copy_failed', __('Could not copy file'), $to . $file['filename']);
- $fs->chmod($to . $file['filename'], FS_CHMOD_FILE);
- }
+ // Create those directories if need be:
+ foreach ( $needed_dirs as $_dir ) {
+ if ( ! $wp_filesystem->mkdir($_dir, FS_CHMOD_DIR) && ! $wp_filesystem->is_dir($_dir) ) // Only check to see if the dir exists upon creation failure. Less I/O this way.
+ return new WP_Error('mkdir_failed', __('Could not create directory.'), $_dir);
+ }
+ unset($needed_dirs);
+
+ // Extract the files from the zip
+ foreach ( $archive_files as $file ) {
+ if ( $file['folder'] )
+ continue;
+
+ if ( '__MACOSX/' === substr($file['filename'], 0, 9) ) // Don't extract the OS X-created __MACOSX directory files
+ continue;
+
+ if ( ! $wp_filesystem->put_contents( $to . $file['filename'], $file['content'], FS_CHMOD_FILE) )
+ return new WP_Error('copy_failed', __('Could not copy file.'), $to . $file['filename']);
}
return true;
}
@@ -562,9 +727,10 @@ function unzip_file($file, $to) {
*
* @param string $from source directory
* @param string $to destination directory
+ * @param array $skip_list a list of files/folders to skip copying
* @return mixed WP_Error on failure, True on success.
*/
-function copy_dir($from, $to) {
+function copy_dir($from, $to, $skip_list = array() ) {
global $wp_filesystem;
$dirlist = $wp_filesystem->dirlist($from);
@@ -572,21 +738,31 @@ function copy_dir($from, $to) {
$from = trailingslashit($from);
$to = trailingslashit($to);
+ $skip_regex = '';
+ foreach ( (array)$skip_list as $key => $skip_file )
+ $skip_regex .= preg_quote($skip_file, '!') . '|';
+
+ if ( !empty($skip_regex) )
+ $skip_regex = '!(' . rtrim($skip_regex, '|') . ')$!i';
+
foreach ( (array) $dirlist as $filename => $fileinfo ) {
+ if ( !empty($skip_regex) )
+ if ( preg_match($skip_regex, $from . $filename) )
+ continue;
+
if ( 'f' == $fileinfo['type'] ) {
- if ( ! $wp_filesystem->copy($from . $filename, $to . $filename, true) ) {
+ if ( ! $wp_filesystem->copy($from . $filename, $to . $filename, true, FS_CHMOD_FILE) ) {
// If copy failed, chmod file to 0644 and try again.
$wp_filesystem->chmod($to . $filename, 0644);
- if ( ! $wp_filesystem->copy($from . $filename, $to . $filename, true) )
- return new WP_Error('copy_failed', __('Could not copy file'), $to . $filename);
+ if ( ! $wp_filesystem->copy($from . $filename, $to . $filename, true, FS_CHMOD_FILE) )
+ return new WP_Error('copy_failed', __('Could not copy file.'), $to . $filename);
}
- $wp_filesystem->chmod($to . $filename, FS_CHMOD_FILE);
} elseif ( 'd' == $fileinfo['type'] ) {
if ( !$wp_filesystem->is_dir($to . $filename) ) {
if ( !$wp_filesystem->mkdir($to . $filename, FS_CHMOD_DIR) )
- return new WP_Error('mkdir_failed', __('Could not create directory'), $to . $filename);
+ return new WP_Error('mkdir_failed', __('Could not create directory.'), $to . $filename);
}
- $result = copy_dir($from . $filename, $to . $filename);
+ $result = copy_dir($from . $filename, $to . $filename, $skip_list);
if ( is_wp_error($result) )
return $result;
}
@@ -618,7 +794,7 @@ function WP_Filesystem( $args = false, $context = false ) {
if ( ! class_exists("WP_Filesystem_$method") ) {
$abstraction_file = apply_filters('filesystem_method_file', ABSPATH . 'wp-admin/includes/class-wp-filesystem-' . $method . '.php', $method);
- if( ! file_exists($abstraction_file) )
+ if ( ! file_exists($abstraction_file) )
return;
require_once($abstraction_file);
@@ -637,7 +813,7 @@ function WP_Filesystem( $args = false, $context = false ) {
return false;
if ( !$wp_filesystem->connect() )
- return false; //There was an erorr connecting to the server.
+ return false; //There was an error connecting to the server.
// Set the permission constants if not already set.
if ( ! defined('FS_CHMOD_DIR') )
@@ -650,7 +826,7 @@ function WP_Filesystem( $args = false, $context = false ) {
/**
* Determines which Filesystem Method to use.
- * The priority of the Transports are: Direct, SSH2, FTP PHP Extension, FTP Sockets (Via Sockets class, or fsoxkopen())
+ * The priority of the Transports are: Direct, SSH2, FTP PHP Extension, FTP Sockets (Via Sockets class, or fsockopen())
*
* Note that the return value of this function can be overridden in 2 ways
* - By defining FS_METHOD in your wp-config.php file
@@ -667,7 +843,7 @@ function WP_Filesystem( $args = false, $context = false ) {
function get_filesystem_method($args = array(), $context = false) {
$method = defined('FS_METHOD') ? FS_METHOD : false; //Please ensure that this is either 'direct', 'ssh', 'ftpext' or 'ftpsockets'
- if( ! $method && function_exists('getmyuid') && function_exists('fileowner') ){
+ if ( ! $method && function_exists('getmyuid') && function_exists('fileowner') ){
if ( !$context )
$context = WP_CONTENT_DIR;
$context = trailingslashit($context);
@@ -688,7 +864,7 @@ function get_filesystem_method($args = array(), $context = false) {
}
/**
- * Displays a form to the user to request for their FTP/SSH details in order to connect to the filesystem.
+ * Displays a form to the user to request for their FTP/SSH details in order to connect to the filesystem.
* All chosen/entered details are saved, Excluding the Password.
*
* Hostnames may be in the form of hostname:portnumber (eg: wordpress.org:2467) to specify an alternate FTP/SSH port.
@@ -700,11 +876,12 @@ function get_filesystem_method($args = array(), $context = false) {
* @param string $form_post the URL to post the form to
* @param string $type the chosen Filesystem method in use
* @param boolean $error if the current request has failed to connect
- * @param string $context The directory which is needed access to, The write-test will be performed on this directory by get_filesystem_method()
+ * @param string $context The directory which is needed access to, The write-test will be performed on this directory by get_filesystem_method()
+ * @param string $extra_fields Extra POST fields which should be checked for to be included in the post.
* @return boolean False on failure. True on success.
*/
-function request_filesystem_credentials($form_post, $type = '', $error = false, $context = false) {
- $req_cred = apply_filters('request_filesystem_credentials', '', $form_post, $type, $error, $context);
+function request_filesystem_credentials($form_post, $type = '', $error = false, $context = false, $extra_fields = null) {
+ $req_cred = apply_filters( 'request_filesystem_credentials', '', $form_post, $type, $error, $context, $extra_fields );
if ( '' !== $req_cred )
return $req_cred;
@@ -714,6 +891,9 @@ function request_filesystem_credentials($form_post, $type = '', $error = false,
if ( 'direct' == $type )
return true;
+ if ( is_null( $extra_fields ) )
+ $extra_fields = array( 'version', 'locale' );
+
$credentials = get_option('ftp_credentials', array( 'hostname' => '', 'username' => ''));
// If defined, set it to that, Else, If POST'd, set it to that, If not, Set it to whatever it previously was(saved details in option)
@@ -765,9 +945,9 @@ function request_filesystem_credentials($form_post, $type = '', $error = false,
if ( !empty($credentials) )
extract($credentials, EXTR_OVERWRITE);
if ( $error ) {
- $error_string = __('Error: There was an error connecting to the server, Please verify the settings are correct.');
+ $error_string = __('ERROR: There was an error connecting to the server, Please verify the settings are correct.');
if ( is_wp_error($error) )
- $error_string = $error->get_error_message();
+ $error_string = esc_html( $error->get_error_message() );
echo '' . $error_string . '
| - | " size="40" /> | +" size="40" /> | |
|---|---|---|---|
| - | size="40" /> | ++ | size="40" /> |
| - | size="40" /> | ++ | size="40" /> | size="40" /> size="40" /> + | size="40" /> size="40" /> |
@@ -834,12 +1031,10 @@ jQuery(function($){
- -
+'; +} +submit_button( __( 'Proceed' ), 'button', 'upgrade' ); +?>